Harbor Freight Tools 69340 Owner's Manual
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
100 LB. CAPACITY
WELDING CART
Visit our website at: http://www.harborfreight.com
Email our technical support at: tech@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-800-444-3353 as soon as possible.
Copyright© 2012 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product
described herein. Tools required for assembly and service may not be included.
ITEM 69340
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Specifications
Weight Capacity 100 lb.
Overall Dim. 27-3/4″ x 16-1/2″ x 30-1/2″
Cylinder Chain Dim. 32-1/4″ L x 5/8″ D
Torch Assy. Bracket 6″ H x 1-7/8″ W x 3/4″ D
Tank Capacity 11-1/4″ x 10-1/8″
Page 2 For technical questions, please call 1-800-444-3353. Item 69340
Important Safety Information
Assembly Precautions
1. Assemble only according to these
instructions. Improper assembly
can create hazards.
2. Wear ANSI-approved safety goggles
and heavy-duty work gloves
during assembly.
3. Keep assembly area clean and well lit.
Use Precautions
1. This product is not a toy. Do not allow
children to play with or near this item.
2. Use as intended only.
3. Inspect before every use; do not use
if parts are loose or damaged.
4. Do not exceed listed weight capacity,
evenly distributed and balanced.
Be aware of dynamic loading!
Sudden load movement may
briefly create excess load
causing product failure.
4. Keep bystanders out of the
area during assembly.
5. Do not assemble when tired
or when under the influence
of drugs or medication.
6. Weight capacity and other product
capabilities apply to properly and
completely assembled product only.
5. Maintain product labels and
nameplates. These carry
important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
6. Operate and store the Cart on
a flat, dry, level surface.
7. Read welding equipment
manual before use.
8. If using gas cylinders, be especially
careful to prevent tipping or damage
to the cylinders. Follow gas cylinder
supplier’s and gas supplier’s
safety instructions at all times.
Page 3For technical questions, please call 1-800-444-3353.Item 69340
Loading...