Harbor Freight Tools 69297 User Manual
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
the receipt in a safe and dry place for future reference.
ITEM 69297
CLEAR WATER
PUMP
Visit our website at: http://www.harborfreight.com
Email our technical support at: tech@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-800-444-3353 as soon as possible.
Copyright© 2011 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
WARNING
When using electric pumps, basic safety
precautions should always be followed to reduce the
risk of fire, electric shock, and personal injury. READ
ALL INSTRUCTIONS BEFORE USING THIS PUMP!
1. This Pump has not been investigated for
use in swimming pool or marine areas.
2. Use only with clear water. Do not use
with flammable liquids such as gasoline,
chemicals or and corrosive liquids.
3. Do not use extension cords with this Pump.
4. Risk of electric shock – This pump is supplied
with a grounding conductor and grounding-type
attachment plug. To reduce the risk of
electric shock, connect only to a properly
grounded, grounding-type receptacle.
5. If there is danger of flooding, the electrical
connections must be taken to higher ground.
6. DO NOT IMMERSE IN WATER. This is not
a submersible pump. Use indoors only.
11. REPLACEMENT PARTS AND ACCESSORIES.
When servicing, use only identical replacement
parts. Use of any other parts will void the
warranty. Only use accessories intended for
use with this pump. Approved accessories
are available from Harbor Freight Tools.
12. The pump must be protected from frost.
13. The pump must be protected from running dry.
14. Do not run the pump with the outlet
closed or blocked. The connections may
burst due to excessive pressure.
15. WARNING: Handling the cord on this product will
expose you to lead, a chemical known to the State
of California to cause cancer, and birth defects or
other reproductive harm. Wash hands after handling.
(California Health & Safety Code § 25249.5, et seq.)
7. Always lock up pumps and keep
out of reach of children.
8. Wear ANSI-approved safety
goggles during installation.
9. DISCONNECT POWER. Unplug when not in use,
before servicing, and when changing accessories.
10. CHECK DAMAGED PARTS. Before using any
pump, check for alignment and binding of moving
parts; any broken parts or mounting fixtures; and
any other condition that may affect proper operation.
Any part that is damaged should be properly
repaired or replaced by a qualified technician.
Page 2 For technical questions, please call 1-800-444-3353. SKU 69297
Grounding Instructions
TO PREVENT ELECTRIC SHOCK AND DEATH FROM INCORRECT GROUNDING WIRE CONNECTION
READ AND FOLLOW THESE INSTRUCTIONS:
Check with a qualified electrician if you
are in doubt as to whether the outlet is
properly grounded. Do not modify the
power cord plug provided with the tool.
Never remove the grounding prong from the plug. Do
not use the tool if the power cord or plug is damaged.
If damaged, have it repaired by a service facility
before use. If the plug will not fit the outlet, have a
proper outlet installed by a qualified electrician.
Grounding
Pin
125 V~ 3-Prong Plug and Outlet
(for up to 125 V~ and up to 15 A)
2. The grounding prong in the plug is connected through
the green wire inside the cord to the grounding
system in the tool. The green wire in the cord must
be the only wire connected to the tool’s grounding
system and must never be attached to an electrically
“live” terminal. (See 3-Prong Plug and Outlet.)
3. The tool must be plugged into an appropriate outlet,
properly installed and grounded in accordance with
all codes and ordinances. The plug and outlet should
look like those in the preceding illustration.
(See 3-Prong Plug and Outlet.)
4. This pump is intended for use on a circuit that has
an outlet that looks like the one illustrated above in
125 V~ 3-Prong Plug and Outlet. The pump has
a grounding plug that looks like the plug illustrated
above in 125 V~ 3-Prong Plug and Outlet.
5. The outlet must be properly installed and grounded
in accordance with all codes and ordinances.
6. Do not use extension cords with this pump.
1.
Tools marked with “Grounding Required” have a three
wire cord and three prong grounding plug. The plug
must be connected to a properly grounded outlet.
If the tool should electrically malfunction or break
down, grounding provides a low resistance path to
carry electricity away from the user, reducing the risk
of electric shock. (See 3-Prong Plug and Outlet.)
Symbology
Double Insulated
Canadian Standards Association
Underwriters Laboratories, Inc.
V~
A
n0 xxxx/min.
Volts Alternating Current
Amperes
No Load Revolutions per Minute (RPM)
7. Do not use an adapter to connect
this pump to a different outlet.
Read the manual before
set-up and/or use.
WARNING marking
concerning Risk of Fire.
Do not cover ventilation ducts.
Keep flammable objects away.
WARNING marking concerning
Risk of Electric Shock.
Properly connect power cord
to appropriate outlet.
WARNING marking concerning
Risk of Explosion.
Do not use to pump
explosive materials.
WARNING marking concerning Risk
of Eye Injury. Wear ANSI-approved
safety goggles with side shields.
Page 3For technical questions, please call 1-800-444-3353.SKU 69297
Loading...