Harbor Freight Tools 69284 Owner's Manual

Owner’s Manual & Safety Instructions

Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating,

inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

ITEM 69284

12V, 100 PSI, High Volume

Air Compressor

Visit our website at: http://www.harborfreight.com

Email our technical support at: tech@harborfreight.com

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-800-444-3353 as soon as possible.

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

Tools required for assembly and service may not be included.

Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL.

SAFETY OPERATION MAINTENANCESETUP

IMPORTANT SAFETY INFORMATION

General Safety Warnings

WARNING Read all safety warnings and instructions.

Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

WARNING SYMBOLS AND DEFINITIONS

This is the safety alert symbol. It is used to alert you to potential personal injury hazards.

Obey all safety messages that follow this symbol to avoid possible injury or death.

Indicates a hazardous situation which, if not avoided,

will result in death or serious injury.

Indicates a hazardous situation which, if not avoided,

could result in death or serious injury.

Indicates a hazardous situation which, if not avoided,

could result in minor or moderate injury.

Addresses practices not related to personal injury.

The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

1. Work area safety

a. Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

b. Do not operate the Compressor in explosive

atmospheres, such as in the presence of flammable liquids, gases or dust.

Compressor motors produce sparks which may ignite the dust or fumes.

c. Keep children and bystanders away

from an operating compressor.

2. Electrical safety

a. Compressor plugs must match the outlet.

Never modify the plug in any way. Do not use any adapter plugs with grounded compressors. Standard plugs and matching

outlets will reduce risk of electric shock.

b. Do not expose compressor to rain or wet

conditions. Water entering a compressor will increase the risk of electric shock.

c. Do not abuse the cord. Never use the

cord for unplugging the compressor. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled

cords increase the risk of electric shock.

3. Personal safety

a. Stay alert, watch what you are doing and

use common sense when operating this compressor. Do not use this compressor while you are tired or under the influence of drugs, alcohol or medication. A moment

of inattention while operating a compressor may result in serious personal injury.

b. Use personal protective equipment.

Always wear ANSI-approved eye protection during setup and use.

c. Prevent unintentional starting. Ensure the

switch is in the off-position before connecting to power source or moving the compressor.

4. Compressor use and care

a. Do not use the compressor if the switch

does not turn it on and off. Any compressor that cannot be controlled with the switch is dangerous and must be repaired.

b. Disconnect the plug from the power source

before making any adjustments, changing accessories, or storing the compressor.

Such preventive safety measures reduce the risk of starting the compressor accidentally.

c. Store an idle compressor out of the reach

of children and do not allow persons unfamiliar with the compressor or these instructions to operate it. A compressor is

dangerous in the hands of untrained users.

Page 2 For technical questions, please call 1-800-444-3353. Item 69284

d. Maintain the compressor. Keep the

compressor clean for better and safer performance. Follow instructions for lubricating and changing accessories. Keep dry, clean and free from oil and grease. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the compressor’s operation. If damaged, have the compressor repaired before use. Many accidents are

caused by a poorly maintained compressor.

Air Compressor Safety Warnings

e. Use the compressor in accordance with

these instructions, taking into account the working conditions and the work to be performed. Use of the compressor for

operations different from those intended could result in a hazardous situation.

5. Service

a. Have your compressor serviced by a

qualified repair person using only identical replacement parts. This will ensure that the

safety of the compressor is maintained.

SAFETYOPERATIONMAINTENANCE SETUP

1. Risk of fire or explosion - do not spray flammable liquid in a confined area or towards a hot surface. Spray area must be well-ventilated. Do not smoke while spraying or spray where spark or flame is present. Arcing parts - keep compressor at least 20 feet away from explosive vapors, such as when spraying with a spray gun.

2. Risk of bursting - do not adjust regulator higher than marked maximum pressure of attachment.

3. Risk of injury - do not direct air stream at people or animals.

4. Do not use to supply breathing air.

5. Do not leave compressor unattended

for an extended period while plugged in. Unplug compressor after working.

6. Keep compressor well-ventilated. Do not cover compressor during use.

7. Start and run the vehicle engine during inflation period.

8. Do not remove the valve cover or adjust internal components.

9. Compressor head gets hot during operation. Do not touch it or allow children nearby during or immediately following operation.

10. Do not use the air hose to move the compressor.

11. The use of accessories or attachments not recommended by the manufacturer may result in a risk of injury to persons.

12. All air line components, including hoses, pipe, connectors, filters, etc., must be rated for a minimum working pressure of 150 PSI, or 150% of the maximum system pressure, whichever is greater.

13. Maintain labels and nameplates on the compressor. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement.

14. This product is not a toy. Keep it out of reach of children.

15. Operate unit on level surface.

16. People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure.

17. WARNING: The brass components of this product contain lead, a chemical known to the State of California to cause birth defects (or other reproductive harm). (California Health & Safety code § 25249.5, et seq.)

18. This Compressor will automatically shut

off on overload or under excessive heat.

Should this occur, turn the Power Switch to its “OFF” position. Wait until the Compressor cools. Then, turn the Power Switch to its “ON” position to resume work.

SAVE THESE INSTRUCTIONS.

Page 3For technical questions, please call 1-800-444-3353.Item 69284

+ 5 hidden pages