Harbor Freight Tools 69106 Owner's Manual
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
ITEM 69106
9,000 LB. CAPACITY
HITCH RECEIVER MOUNT
for Vehicle Winches
Visit our website at: http://www.harborfreight.com
Email our technical support at: tech@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-800-444-3353 as soon as possible.
Copyright© 2012 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product
described herein. Tools required for assembly and service may not be included.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Important Safety Information
TO PREVENT SERIOUS INJURY:
1. Do not exceed 9,000 lb. pull capacity.
Be aware of dynamic loading!
Sudden load movement may
briefly create excess load
causing product failure.
Capacity limited by hitch mounted on.
2. Obey DOT and local regulations
for use on public roads.
3. Route cable through fairlead slot
and pull straight back only.
4. Wear ANSI-approved
safety goggles and heavy-duty
work gloves during setup.
5. Secure before use.
6. Inspect before every use;
do not use if parts loose or damaged.
7. Use as intended only.
8. Read winch manual and
manual for hitch receiver this is
mounted in before setup.
9. Assemble only according to these
instructions. Improper assembly
can create hazards.
10. Keep assembly area clean and well lit.
11. Keep bystanders out of the
area during assembly.
12. Do not assemble when tired
or when under the influence
of drugs or medication.
13. Do not drill new holes to attach winch
to mount or weld winch to mount.
14. Weight capacity and other product
capabilities apply to properly and
completely assembled product only.
15. This product is not a toy. Do not allow
children to play with or near this item.
16. Maintain product labels and
nameplates. These carry
important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
Page 2 For technical questions, please call 1-800-444-3353. Item 69106
Loading...