Harbor Freight Tools 69026 Owner's Manual

Owner’s Manual & Safety Instructions

Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating,

inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

ITEM 69026

WHEEL CHOCK

• Selflockingwheelchockworkson virtuallyallstandardmotorcycles

• Motorcyclewillstayinverticalposition allowingbiketobestrappeddown

• Mountingframeallowsquick&easy removalofthebikeinseconds

Usage shown above.

Wheel not included.

Visit our website at: http://www.harborfreight.com

Email our technical support at: tech@harborfreight.com

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-800-444-3353 as soon as possible.

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

Tools required for assembly and service may not be included.

Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL.

IMPORTANT SAFETY INFORMATION

Read all safety warnings and instructions.

Failure to follow the warnings and instructions may result in serious injury.

Save all warnings and instructions for future reference.

1. Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.

2. Keep children and visitors away while installing. Distractions can cause you to lose control.

3. Store idle products out of reach of children and other untrained persons. Never allow children to play with or around the Wheel Chock.

4. Stay alert. Watch what you are doing, and

use common sense when using the Wheel Chock. Do not use this product while tired

or under the inuence of drugs, alcohol, or

medication. A moment of inattention while operating may result in serious personal injury.

5. Dress properly. Do not wear loose clothing

or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or

long hair can be caught in moving parts.

6. Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the motorcycle in unexpected situations.

7. Use safety equipment. Always wear eye protection. Dust mask, nonskid safety shoes, hard hat, heavy-duty work gloves, or hearing protection must be used for appropriate conditions. Always wear ANSI-approved safety goggles and a dust mask/respirator when installing or performing maintenance on this tool.

8. Maintain labels and nameplates on the tool. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement.

9. Use the correct product for your motorcycle.

Make sure the motorcycle’s wheel ts into the Wheel Chock prior to rst use.

10. The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

Specications

Construction Formed Steel w/ Carbon Steel Hardware & Thermoplastic End Caps Overall Dimensions 24-1/2" L X 9-3/4" W X 12-7/8" H Weight 16 Pounds Moveable Chock Length 10"

SAVE THESE INSTRUCTIONS.

Page 2 For technical questions, please call 1-800-444-3353. SKU 69026

+ 2 hidden pages