Harbor Freight Tools 68898 Product manual

Owner’s Manual & Safety Instructions

Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating,

inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

ROLLER STAND

Visit our website at: http://www.harborfreight.com

Email our technical support at: tech@harborfreight.com

When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken,

please call 1-800-444-3353 as soon as possible.

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product

described herein. Tools required for assembly and service may not be included.

ITEM 68898

Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL.

Specifications

Adjustable Height 26-3/4" – 42-3/4"

Ball Bearing Roller 11-1/4" L

Important Safety Information

Assembly Precautions

1. Assemble only according to these instructions. Improper assembly can create hazards.

2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.

3. Keep assembly area clean and well lit.

4. Keep bystanders out of the area during assembly.

5. Do not assemble when tired or when under the influence of drugs or medication.

6. Weight capacity and other product capabilities apply to properly and completely assembled product only.

Page 2 For technical questions, please call 1-800-444-3353. Item 68898

Use Precautions

1. Wear ANSI-approved safety goggles and heavy-duty work gloves during use.

2. Do not exceed the Roller Stand’s maximum weight capacity of 132 lb. Be aware of dynamic loading! Sudden load movement may briefly create excess load causing product failure.

3. Use the Roller Stand on a flat, level surface capable of supporting the weight of the Stand and the weight of the workpiece.

4. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically non-conductive clothes and non-skid footwear are recommended when working. Wear restrictive hair covering to contain long hair.

5. This product is not a toy. Do not allow children to play with or near this item.

6. Use as intended only. Do not use the Roller Stand to support people or animals.

7. Inspect before every use; do not use if parts are loose or damaged.

8. Maintain product labels and nameplates. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement.

9. The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

Page 3For technical questions, please call 1-800-444-3353.Item 68898

+ 5 hidden pages