Harbor Freight Tools 61609 Product manual

Specifications

Component Size Weight Capacity

Top Compartment 26-1/2″ W x 18" L 40 lb

Drawer A (x3) 6-1/2″ W x 14-3/8″ L x 2″ D 15 lb each

Drawer B (x4) 22-1/4″ W x 14-3/8″ L x 2″ D 40 lb each

Drawer C 22-1/4″ W x 14-3/8″ L x 3-1/8″ D 60 lb

Total Combined Weight Capacity 305 lb

Empty Weight 88 lb

Page 2 For technical questions, please call 1-888-866-5797. Part of

Item 61609

IMPORTANT SAFETY INFORMATION

Assembly Precautions

1. Assemble only according to these instructions.
Improper assembly can create hazards.

2. Wear ANSI-approved safety goggles and
heavy-duty work gloves during assembly.

3. Keep assembly area clean and well lit.

4. Keep bystanders out of the area during assembly.

Use Precautions

TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:

1. DO NOT SIT, STAND OR CLIMB ON THIS ITEM.

2. This product is not a toy nor a toy chest.
Do not allow children to play with or near this item.

3. Do not exceed weight capacities,
evenly distributed from bottom up.
Be aware of dynamic loading!
Sudden load movement may briefly create excess
load causing product failure. Do not exceed
capacity of bench or shelf supporting Top Chest.

4. Do not open more than one Drawer at once.

5. Empty, close, and lock Drawers before moving.

5. Do not assemble when tired or when under the
influence of alcohol, drugs or medication.

6. Weight capacity and other product capabilities apply
to properly and completely assembled product only.

7. Assemble on a flat, level, hard and smooth surface
capable of safely supporting a fully loaded Chest.

6. Use only on a flat, level, hard and smooth surface
capable of safely supporting a fully loaded Chest.

7. Do not lift while loaded.

8. To prevent tipping, move using supplied
handle on Bottom Cabinet only.

9. Use as intended only.

10. Inspect before every use;
do not use if parts are loose or damaged.

11. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.

Item 61609

Page 3For technical questions, please call 1-888-866-5797.Part of

Assembly Instructions

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.

1. Assemble on a flat, level, hard and smooth surface
capable of safely supporting a fully loaded Chest.

2. Locate the Keys, label them, then
put them in a safe place.

3. Note: The Bottom Cabinet and Top
Chest have different sets of keys.

4. Attach Handles (7) to both sides of the
Chest using four Screw Sets (8).

Handle

Washer

Screw

5. Choosing location:

a. If stacking Top Chest on Bottom Cabinet,

refer to Bottom Cabinet Owner’s
Manual for Final Assembly, Operation
and Maintenance Instructions.

b. If using Top Chest separately from

Bottom Cabinet, refer to Operation and
Maintenance Instructions on page 4.

Page 4 For technical questions, please call 1-888-866-5797. Part of

Item 61609

Operation Instructions

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.

1. Empty all Drawers.

Note: Lid must be open for Drawers to be unlocked.

2. Close all Drawers and lock them.

3. If stacked on Bottom Cabinet, to
prevent tipping, push/pull using supplied
handle on Bottom Cabinet only.

4. If using separately from Bottom Cabinet, hold both
handles securely and carry the Chest to the desired
location. Have someone assist as needed.

5. Place only on a flat, level, hard and smooth surface
capable of safely supporting a fully loaded Chest.

6. Unlock Drawers and fill Chest evenly, from bottom
to top. Do not exceed weight capacities.

Maintenance and Servicing

Procedures not specifically explained in this document must
be performed only by a qualified technician.

TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If any part becomes damaged,
have the problem corrected before further use.

1. PERIODICALLY, inspect the general
condition of the Chest. Check for:

• loose hardware,

• misalignment or binding of moving parts,

• cracked or broken parts,

• any other condition that may

affect its safe operation.

2. Wipe external surfaces of the Chest with clean cloth.

3. Lubricate Drawer Slides as needed.

Item 61609

Page 5For technical questions, please call 1-888-866-5797.Part of