Specifications
Rating 125VAC / 15A
Wire Capacity 16 AWG, 3 wire, round jacket
NEMA Configuration 5-15R / 5-15P
Important Safety Information
TO PREVENT SERIOUS INJURY AND ELECTRIC SHOCK:
1. Disconnect power
before connecting.
2. Inspect before connecting
and every use. Do not use if
parts loose or damaged.
3. Wear ANSI-approved
safety goggles during installation.
4. Use as intended only.
Do not expose to moisture or rain.
Keep off ground.
3
/8″
5. Tighten all connections securely.
6. The brass components of
this product contain lead,
a chemical known to the State of
California to cause birth defects
(or other reproductive harm).
(California Health & Safety Code
§ 25249.5, et seq.)
1″
Page 2
For technical questions, please call 1--1-800-444-3353.
Figure A
Item 61568/61569
Wiring Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section
at the beginning of this document including all text under
subheadings therein before set up or use of this product.
TO PREVENT SERIOUS INJURY AND DEATH FROM ELECTRIC SHOCK:
DEVICE TO BE INSTALLED BY QUALIFIED PERSON.
CONDUCTORS MUST BE DE-ENERGIZED BEFORE WIRING.
1. Select proper wire size and
type for load and application.
Use only applicable round cord
and cables per electrical codes.
Device to be used with 16-3 cord
and the following cord types:
SJT group, ST group, S group,
SE group, SJ group, SJE group
USE COPPER WIRE ONLY.
2. Wiring preparation:
a. Select correct end of cord
to ensure easy insertion
of conductors. (Conductor
sequence is important.)
b. Strip cord jacket and
conductors as shown in
Figure A. Twist strands.
(Do not tin conductors.)
3. Open the connector by
separating its body and shell.
(Note the plug/connector
is keyed to the shell.)
Item 61568/61569
For technical questions, please call 1--1-800-444-3353.
4. Wiring method:
a. Slip outer shell onto the
cord. Adjustment of cord
clamps may be necessary
depending on cord size.
b. Insert all conductors into
identified terminal pockets.
1. Green wire to green
terminal pocket.
2. White wire to white
terminal pocket.
3. Black wire to brass
terminal pocket.
c. Tighten terminal screws
to 20 inch lb.
5. Assembly:
a. Slip shell into front section
by aligning key on body
with key in shell.
b. Evenly tighten
assembly screws to 14 inch lb.
c. Evenly tighten cord grip screws
to 14 inch lb.
Page 3
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products
meet high quality and durability standards, and warrants to the original
purchaser that this product is free from defects in materials and
workmanship for the period of 90 days from the date of purchase.
This warranty does not apply to damage due directly or indirectly, to
misuse, abuse, negligence or accidents, repairs or alterations outside
our facilities, criminal activity, improper installation, normal wear and
tear, or to lack of maintenance. We shall in no event be liable for
death, injuries to persons or property, or for incidental, contingent,
special or consequential damages arising from the use of our product.
Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation of exclusion may
not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF
ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned
to us with transportation charges prepaid. Proof of purchase date and
an explanation of the complaint must accompany the merchandise.
If our inspection verifies the defect, we will either repair or replace
the product at our election or we may elect to refund the purchase price
if we cannot readily and quickly provide you with a replacement. We will
return repaired products at our expense, but if we determine there is
no defect, or that the defect resulted from causes not within the scope
of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may
also have other rights which vary from state to state.
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • 1-800-444-3353
Loading...