Harbor Freight Tools 61558 Product manual

Specifications

Rating 1625 W / 13 A  / 125 VAC
Cord 14 AWG x 40'

IMPORTANT SAFETY INFORMATION

Installation Precautions

E223040

59UT

1. Install only according to these instructions.
Improper Installation can create hazards.

2. Wear ANSI-approved safety goggles and
heavy-duty work gloves during installation.

3. Keep Installation area clean and well lit.

4. Keep bystanders out of the area during installation.

5. Do not install when tired or when under the
influence of alcohol, drugs or medication.

Use Precautions

1. This product is not a toy. Do not allow
children to play with or near this item.

2. Wear ANSI-approved safety goggles and
heavy-duty work gloves during use.

3. Use as intended only.

4. Inspect before every use; do not use if parts are
loose or damaged or if insulation is worn.

5. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.

6. Plugs must match the outlet. Never modify the
plug in any way. Do not use any adapter plugs.
Unmodified plugs and matching outlets
will reduce risk of electric shock.

7. Avoid body contact with grounded surfaces
such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is grounded.

8. When pulling cord from the Cord Reel,
grasp the Reel’s cord itself, and not the
device or tool the cord is plugged into.

6. Install the Cord Reel properly before
connecting to the power supply.

7. If mounted in an area that is not readily accessible,
connect this Cord Reel to a switch-controlled outlet;
then, if a malfunction occurs, the Reel can
be disconnected immediately.

8. Install out of reach of children.

9. Verify that installation surface has no hidden 
utility lines before drilling or driving screws.

9. Do not expose reels to rain or wet
conditions. Water entering a reel will increase
the risk of electric shock.
If operating a reel in a damp location is
unavoidable, use a Ground Fault Circuit Interrupter
(GFCI) protected supply. Use of a GFCI
reduces the risk of electric shock.

10. Check with a qualified electrician if you are in doubt
as to whether the outlet is properly grounded.
If the plug will not fit the outlet, have a
proper outlet installed by a qualified electrician.

11. The plug must be connected to a properly
grounded outlet. If the reel should electrically
malfunction or break down, grounding provides a
low resistance path to carry electricity away from
the user, reducing the risk of electric shock.

12. The grounding prong in the plug is connected
through the green wire inside the cord to the
grounding system in the reel. The green wire
in the cord must be the only wire connected to
the reel’s grounding system and must never
be attached to an electrically “live” terminal.

13. The reel must be plugged into an appropriate
outlet, properly installed and grounded in
accordance with all codes and ordinances.

14. Do not attach an extension cord
to this item’s input cord.

15. Do not open reel spring mechanism. Spring
may eject forcefully if housing is opened.

Page 2 For technical questions, please call 1-800-444-3353. Item 61558