Harbor Freight Tools 60790 Owner's Manual

Specifications

Weight Capacity 100 lb.
Overall Dim. 27-3/4″ x 15-3/8″ x 28-3/74″
Cylinder Chain Dim. 32-1/4″ L x 5/8″ D
Tank Capacity 11-1/4″ x 10-1/8″

Page 2 For technical questions, please call 1-800-444-3353. Item 60790

Important Safety Information

Assembly Precautions

1. Assemble only according to these
instructions. Improper assembly
can create hazards.

2. Wear ANSI-approved safety goggles
and heavy-duty work gloves
during assembly.

3. Keep assembly area clean and well lit.

Use Precautions

1. This product is not a toy. Do not allow
children to play with or near this item.

2. Use as intended only.

3. Inspect before every use; do not use
if parts are loose or damaged.

4. Do not exceed listed weight capacity,
evenly distributed and balanced.
Be aware of dynamic loading!
Sudden load movement may
briefly create excess load
causing product failure.

4. Keep bystanders out of the
area during assembly.

5. Do not assemble when tired
or when under the influence
of drugs or medication.

6. Weight capacity and other product
capabilities apply to properly and
completely assembled product only.

5. Maintain product labels and
nameplates. These carry
important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.

6. Operate and store the Cart on
a flat, dry, level surface.

7. Read welding equipment
manual before use.

8. If using gas cylinders, be especially
careful to prevent tipping or damage
to the cylinders. Follow gas cylinder
supplier’s and gas supplier’s
safety instructions at all times.

Page 3For technical questions, please call 1-800-444-3353.Item 60790