Harbor Freight Tools 60668 Product manual

Specifications

Weight Capacity 7000 lb.

Lifting Arm 4-1/2" x 1-1/2"

Base Dimensions 7" x 4"

WARNING SYMBOLS AND DEFINITIONS

This is the safety alert symbol. It is used to alert you to potential personal injury hazards.

Obey all safety messages that follow this symbol to avoid possible injury or death.

Maximum Lift Height 42"

Minimum Lift Height 5"

Indicates a hazardous situation which, if not avoided,

will result in death or serious injury.

Indicates a hazardous situation which, if not avoided,

could result in death or serious injury.

Indicates a hazardous situation which, if not avoided,

could result in minor or moderate injury.

Addresses practices not related to personal injury.

IMPORTANT SAFETY INFORMATION

Read all safety warnings and instructions.
Save all warnings and instructions for future reference.
Failure to heed these markings may result in personal injury and/or property damage:

1. Study, understand, and follow all instructions
before operating this device.

2. Do not exceed 7000 lb. rated capacity.

3. Use only on hard, flat, level surfaces.

4. Lifting device only. Immediately after lifting,
support the vehicle with appropriate means.

5. Wear ANSI-approved safety goggles and
heavy-duty work gloves during use.

6. Keep clear of load while lifting and lowering.

7. Lower load slowly in controlled fashion.
Do not allow load to drop quickly.

8. Do not use for aircraft purposes.

9. WARNING: This product contains lead, a chemical
known to the State of California to cause cancer
and birth defects or other reproductive harm.
(California Health & Safety Code § 25249.5, et seq.)

10. Inspect before every use;
do not use if parts loose or damaged.

11. Do not alter the jack or use attachments and/
or adapters that are not supplied by the
manufacturer. Any alterations or modifications
to this tool may result in dangerous conditions.

12. Be aware of dynamic loading!
Sudden load movement may briefly create
excess load causing product failure.

13. Maintain labels and nameplates on the tool.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.

14. This product is not a toy.
Keep it out of reach of children.

15. The warnings, precautions, and instructions
discussed in this manual cannot cover all
possible conditions and situations that may occur.
The operator must understand that common sense
and caution are factors, which cannot be built into
this product, but must be supplied by the operator.

SAVE THESE INSTRUCTIONS.

Page 2 For technical questions, please call 1-800-1-888-866-5797. Item 60668

Components

Steel Rail

Handle

Reversing

Latch

Reversing

Lever

Lifting Arm

Base

Page 3For technical questions, please call 1-800-1-888-866-5797.Item 60668