Harbor Freight Tools 60642 Product manual
WARNING SYMBOLS AND DEFINITIONS
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
IMPORTANT SAFETY INFORMATION
1. CAUTION! TO REDUCE THE
RISK OF FIRE – USE ONLY
T4 TYPE 12 WATT LAMP.
2. Do not place under direct sunlight.
Magnifying glasses can cause fires if light
is directed through them at flammable
surfaces. Close cover after every use.
3. Inspect before use. Do not use if
parts are loose or damaged.
4. The use of any accessory attachments
not recommended by the lamp
manufacturer may cause injuries.
5. Do not use lamp for other than intended use.
6. Maintain labels and nameplates on the
appliance. These carry important safety
information. If unreadable or missing, contact
Harbor Freight Tools for a replacement.
7. Do not stare at the sun or other light source
through the lamp’s magnifying lens.
8. This lamp is not a toy. Keep it
out of reach of children.
9. WARNING: Handling the cord on this product will
expose you to lead, a chemical known to the State
of California to cause cancer, and birth defects or
other reproductive harm. Wash hands after handling.
(California Health & Safety Code § 25249.5, et seq.)
10. The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur. It must be understood by the
operator that common sense and caution are
factors which cannot be built into this product,
but must be supplied by the operator.
11. Do not use near flammable materials.
12. Maintain products with care. Keep the lamp
clean for better and safer performance. Inspect
the components periodically. If damaged,
have it repaired by a qualified technician
13. Do not use outdoors.
14. IMPORTANT SAFETY
INSTRUCTIONS This portable luminaire has
a polarized plug (one blade is wider than the other)
as a feature to reduce the risk of electric shock.
This plug will t in a polarized outlet only one way.
If the plug does not t fully in the outlet, reverse
the plug. If it still does not t, contact a qualied
electrician. Never use with an extensioncord unless
plug can be fully inserted. Do not alter the plug.
15. Unplug from outlet when not in use and
before maintenance or cleaning.
16. Risk of Electric Shock - Use In Dry Locations Only.
Page 2 For technical questions, please call 1-800-444-3353. Item 60642
Power Cord Safety
1. A short power supply cord is provided
to reduce risks resulting from becoming
entangled in or tripping over a longer cord.
2. Extension cords are available and may be
used if care is exercised in their use.
SAVE THESE INSTRUCTIONS.
Specifications
Electrical Rating 120 V~ / 60 Hz / 12W
Magnification 2X, 4.25X
Bulb Type T4 11W Fluorescent Lamp
Cord Length 57"
Height 20"
Base Dimensions 8-1/4" L x 5-1/2" W
3. If an extension cord is used:
a. The marked electrical rating of the
extension cord should be at least as great
as the electrical rating of the lamp.
b. The longer cord should be arranged so that it will
not drape over the counter top or tabletop where
it can be pulled on by children or tripped over.
4006934
Page 3For technical questions, please call 1-800-444-3353.Item 60642
Loading...