Harbor Freight Tools 42986 User Manual 2
BENCH GRINDER PEDESTAL STAND
Model
42986
ASSEMBLY AND OPERATING INSTRUCTIONS
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright© 2000 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein
may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within
this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from
the product described herein. Tools required for assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Revised Manual 10l
THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For
future reference, please complete the owner’s record below:
Model_____________ Serial No.____________ Purchase Date_____________
SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you
read the entire manual to become familiar with the unit BEFORE you begin assembly.
Technical Specications
Tool Name: Stand, Bench Grinder Pedestal
Item Number: 42986
Stand Height: 29-1/2”
Table Dimensions: 11” x 9-5/8”
Table Mount Slots: (Qty =6) 5/8” wide
Base Dimensions: 17-1/4” Triangle
Base Mount Holes: 3/8” Diameter
Material: Cold Rolled Steel and Cast Iron
Finish: Grey Enamel Paint
Weight: 21.60
Maximum Weight Capacity: 75 Lbs.
Warning: The warnings, cautions and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be understood by
the operator that COMMON SENSE AND CAUTION ARE FACTORS WHICH CANNOT BE
BUILT INTO THIS PRODUCT, BUT MUST BE SUPPLIED BY THE OPERATOR.
The Operator
PLEASE REMEMBER:
Do not operate the product to be used with this item, if under the inuence of alcohol or drugs. Read
warning labels on prescriptions to determine if your judgment/reexes might be impaired.
Do not wear loose clothing or jewelry as they can be caught in parts.
Protective gloves and non-skid footwear are recommended.
Wear restrictive hair covering to contain long hair.
Use eye and ear protection. Always wear ANSI approved impact safety goggles.
Maintain proper footing and balance at all times.
Use the right product for the job. Do not attempt to force a large tool or attachment to do the work
of a smaller industrial tool. There are certain applications for which this tool was designed. Do
not modify this tool and do not use this tool for a purpose for which it was not intended.
Work Area
TO AVOID RISK OF PERSONAL INJURY, EQUIPMENT DAMAGE, FIRE
AND SHOCK, MAKE SURE YOUR WORK AREA IS:
Free of damp, wet or rainy conditions.
Free of children (never let them handle tools or machinery).
Well-lit.
Clean and uncluttered.
Page 2 For technical questions, please call 1-800-444-3353. SKU 42986
Loading...