Harbor Freight Tools 38661 Owner's Manual
CORNER CLAMP
Model
38661
SET UP AND OPERATING INSTRUCTIONS
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
Distributed exclusively by Harbor Freight Tools®.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright© 1998 by Harbor Freight Tools®. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
Manual Revised 07k
SAVE THIS MANUAL
Keep this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures. Write the product’s serial number
in the back of the manual (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
TECHNICAL SPECIFICATIONS
Maximum Jaw Capacity 2 1/2 “
Jaw Width 2 5/8”
Body Cast Aluminum
Handles Heavy Duty PVC
Screws Hardened Steel Threaded Lead
Product Use: Excellent tool for accurate mitre and corner clamping. The Quick
Release feature makes set-up quick and easy.
IMPORTANT SAFETY INSTRUCTIONS!
Read all instRuctions befoRe using this pRoduct!
The Operator
COMMON SENSE AND CAUTION ARE FACTORS WHICH CANNOT BE BUILT
INTO ANY PRODUCT. THESE FACTORS MUST BE SUPPLIED BY THE OP-
ERATOR. PLEASE REMEMBER:
Do not operate the product if under the inuence of alcohol or drugs. Read
•
warning labels on prescriptions to determine if your judgment/reexes might be
impaired.
Do not wear loose clothing or jewelry as they can be caught in moving parts.
•
Protective gloves and non-skid footwear is recommended.
•
Wear restrictive hair covering to contain long hair.
•
Use eye and ear protection. Always wear:
•
ANSI approved impact safety goggles.
•
Maintain proper footing and balance at all times.
•
Work Area
TO AVOID RISK OF PERSONAL INJURY, EQUIPMENT DAMAGE, FIRE AND
SHOCK, MAKE SURE YOUR WORK AREA IS:
Free of damp, wet or rainy conditions
•
Free of children (never let them handle tools or machinery)
•
Well-lit
•
Clean and uncluttered
•
REV 00j
Page 2SKU 38661 For technical questions, please call 1-800-444-3353.
Loading...