Harbor Freight Tools 38593 Owner's Manual

Table of Contents

Safety .................................................2

Specifications .....................................8

SAFETY OPERATION MAINTENANCESETUP

Operation ............................................9

WARNING SYMBOLS AND DEFINITIONS

This is the safety alert symbol. It is used to alert you to

potential personal injury hazards. Obey all safety messages

that follow this symbol to avoid possible injury or death.

Indicates a hazardous situation which, if not avoided,

could result in minor or moderate injury.

Addresses practices not related to personal injury.

Maintenance ......................................10

Parts List and Diagram ......................11

Warranty ............................................12

will result in death or serious injury.

could result in death or serious injury.

IMPORTANT SAFETY INFORMATION

General Power Tool Safety Warnings

Read all safety warnings and all instructions.

Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

The term ″power tool″ in the warnings refers to your mains-operated (corded) power tool.

Work Area Safety

1. Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust.

Power tools create sparks which

may ignite the dust or fumes.

Page 2 For technical questions, please call 1-888-866-5797. Item 38593

3. Keep children and bystanders away while operating a power tool.

Distractions can cause you to lose control.

Electrical Safety

1. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with grounded power tools.

Unmodified plugs and matching outlets

will reduce risk of electric shock.

2. Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased

risk of electric shock if your body is grounded.

3. Do not expose power tools to rain or wet conditions. Water entering a power

tool will increase the risk of electric shock.

Personal Safety

1. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention

while operating power tools may result in serious personal injury.

2. Use personal protective equipment. Always wear eye protection.

Protective equipment such as dust mask,

non-skid safety shoes, hard hat, or

hearing protection used for appropriate conditions will reduce personal injuries.

3. Do not overreach. Keep proper footing and balance at all times.

This enables better control of the

power tool in unexpected situations.

4. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the risk of electric shock.

5. When operating a power tool outdoors, use an extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces the risk of electric shock.

6. If operating a power tool in a damp location is unavoidable, use a Ground Fault Circuit Interrupter (GFCI) protected supply. Use of a GFCI

reduces the risk of electric shock.

4. Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from hot parts. Loose clothes, jewelry or

long hair can be burned by hot parts.

5. Only use safety equipment that has been approved by an appropriate standards agency.

Unapproved safety equipment may not provide adequate protection. Eye protection must be ANSI-approved and breathing protection must be NIOSH-approved for the specific

hazards in the work area.

SAFETYOPERATIONMAINTENANCE SETUP

Page 3For technical questions, please call 1-888-866-5797.Item 38593

Power Tool Use and Care

1. Do not force the power tool. Use the correct power tool for your

SAFETY OPERATION MAINTENANCESETUP

application. The correct power tool

will do the job better and safer at the rate for which it was designed.

2. Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools. Such preventive safety

measures reduce the risk of starting

the power tool accidentally.

3. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous

in the hands of untrained users.

4. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents

are caused by poorly maintained power tools.

5. Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp cutting edges are less likely

to bind and are easier to control.

6. Use the power tool, and accessories etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for

operations different from those intended

could result in a hazardous situation.

Service

Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Woodburner Safety Warnings

1. When working with plastics, varnish, or similar materials, gases develop that are easily flammable and can lead to explosions. Be prepared for flames to develop and keep suitable fire extinguishing means at hand.

2. The tip becomes very hot. Do not lay the Woodburner on flammable surfaces when operating the Woodburner or immediately after turning the Woodburner off. Set the Woodburner on a flat, level surface so that the tip is directed upwards and away from the supporting surface.

3. Do not use the Woodburner near flammable materials.

4. Do not touch the tube of the heating element or the tip when they are hot. They will be hot enough to cause burns during use and for some time afterwards.

5. Do not use the Woodburner on glass.

6. Wear ANSI-approved safety goggles and NIOSH-approved respirator during use.

7. Avoid exposure to fumes. Use only with adequate ventilation.

8. Work on fire-proof surfaces only.

9. Maintain labels and nameplates on the tool. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement.

10. Avoid unintentional starting. Prepare to begin work before turning on the tool.

11. Do not leave the tool unattended when it is plugged into an electrical outlet. Turn off the tool, and unplug it from its electrical outlet before leaving.

12. This product is not a toy. Keep it out of reach of children.

Page 4 For technical questions, please call 1-888-866-5797. Item 38593

+ 8 hidden pages