Harbor Freight Tools 36469, 36468 User Manual

Flat Bottom

Long Ram Hydraulic Jack

8 T on3 T on

36468 36469

ASSEMBLY & OPERATING INSTRUCTIONS

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at http://www .harborfreight.com

TO PREVENT SERIOUS INJURY,

READ AND UNDERSTAND ALL WARNINGS

AND INSTRUCTIONS BEFORE USE.

Copyright© 2004 by Harbor F reight Tools®. All rights reserved. No portion
of this manual or any artwork contained herein may be reproduced in any shape
or form without the express written consent of Harbor F reight Tools.

For technical questions and replacement parts, please call 1-800-444-3353

THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please

complete the owner’s record below:

Model

______________ Serial No._____________ Purchase Date_______________

SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the
entire manual to become familiar with the unit BEFORE y ou begin assembly .

snoitacificepS

UKS8646396463

hsiniF

yticapaCthgieW

thgieHmumixaM

thgieHmuminiM

ekortS

retemaiDtfahS

eziSelohniP

yticapaCknaTliO

thgieW

noT3noT8

-44

"02-911/4”

-17/46"-15/61”

5

/8”

.zo6.71.zo82

-721/

2

.sbL-831/

lemanedekaB

1

/2”
”42

.sbL

2

Safety Warnings and Precautions

WARNING: When using product, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.

Read all instructions before using this product!

1. Keep work area clean. Cluttered areas invite injuries.

2. Observe work area conditions. Keep work area well lit.

3. Store idle equipment. When not in use, the Hydraulic Jack or the product it mounts on must be
stored in a dry location to inhibit damage from moisture and salt air.

4. Check for damaged parts. Before using the Hydraulic Jack, any par t that appears damaged
should be carefully checked to determine that it will operate properly and perform its intended
function. Check for any broken or damaged parts and any other conditions that may affect its
operation. Replace or repair damaged or worn parts immediately.

5. Replacement parts and accessories. When servicing, use only identical replacement par ts.
Use of any other parts will void the warranty.

6. Do not force product. Do not use inappropriate attachments in an attempt to exceed the Hydraulic
Jack’s lifting capacity.

7. Use the right product for the job. Do not attempt to force a small Jack or attachment to do the
work of a larger industrial Jack. There are certain applications for which this Jack was designed.
Do not modify this Jack and do not use this Jack for a purpose for which it was not intended. Do
not use on airplanes. Never attempt to install a base onto this Jack.

8. Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts.
Protective, electrically non-conductive clothes and non-skid footwear are recommended when
installing or using this product. Wear restrictive hair cove ring to contain long hair. W ear glov es to
protect hands.

SKUs 36468 & 36469 Page 2

REV 04/05