Harbor Freight Tools 3343 User Manual

AUTOMOTIVE TIMING

®

LIGHT - XENON

Model 03343

ASSEMBLY and OPERATING

INSTRUCTIONS

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at http://www.harborfreight.com

Copyright © 2003 by Harbor Freight Tools®. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools .

For technical questions and replacement parts, please call 1-800-444-3353

Specifications

Overall Dimensions 7.5” L x 2” Dia. and a 3.5” Handle Grip
Lead Length 4 Feet
Features: Xenon bulb, Clamp on inductive pick up, automatic reverse polarity, overload
protection, trigger activated pistol grip

Save This Manual

You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.

Safety Warnings and Precautions

WARNING: When using tool, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.

Read all instructions before using this tool!

1. Keep work area clean. Cluttered areas invite injuries.

2. Observe work area conditions. Do not use the timing light in damp or wet locations.
Don’t expose to rain. Keep work area well lighted. Do not use electrically powered
tools in the presence of flammable gases or liquids.

3. Keep children away. Children must never be allowed in the work area. Do not let
them handle the timing light.

4. Store idle equipment. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.

5. Use the right tool for the job. Do not attempt to force a small tool or

attachment to do the work of a larger industrial tool. There are certain
applications for which this tool was designed. It will do the job better
and more safely at the rate for which it was intended. Do not modify this
tool and do not use this tool for a purpose for which it was not intended.

6. Dress properly. Do not wear loose clothing or jewelry as they can be caught in
moving parts. Protective, electrically non-conductive clothes and non-skid footwear
are recommended when working. Wear restrictive hair covering to contain long hair.

7. Use eye and ear protection. Always wear ANSI approved impact safety goggles.

8. Do not overreach. Keep proper footing and balance at all times. Do not reach over
or across running machines.

WARNING!!

produces carbon monoxide. Work in a well ventilated area to avoid carbon monoxide
poisoning. Carbon Monoxide is an odorless, colorless gas that can cause serious
injury or death if inhaled.

SKU 03343

Do not work in a closed garage. A vehicle’s engine while running

Page 2

9. Maintain tools with care. Keep tools clean for better and safer performance. Inspect
tool cords periodically, and if damaged, have them repaired by an authorized
technician. The handles must be kept clean, dry, and free from oil and grease at all
times.

10. Stay alert. Watch what you are doing, use common sense. Do not operate any tool
when you are tired.

11. Check for damaged parts. Before using any tool, any part that appears damaged
should be carefully checked to determine that it will operate properly and perform its
intended function. Check for alignment and binding of moving parts; any broken parts
or mounting fixtures; and any other condition that may affect proper operation. Any
part that is damaged should be properly repaired or replaced by a qualified
technician. Do not use the tool if the trigger does not turn On and Off properly.

12. Guard against electric shock. Prevent body contact with grounded surfaces such as
pipes, radiators, ranges, and refrigerator enclosures.

13. Replacement parts and accessories. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use accessories
intended for use with this tool. Approved accessories are available from Harbor
Freight Tools.

14. Do not operate tool is under the influence of alcohol or drugs. Read warning
labels if taking prescription medicine to determine if your judgement or reflexes are
impaired while taking drugs. If there is any doubt, do not operate the Timing Light.

15. Maintenance. For your safety, maintenance should be performed regularly by a
qualified technician.

Note: Performance of this tool (if powered by line voltage) may vary depending on varia-

tions in local line voltage. Extension cord usage may also affect tool performance.

Warning: The warnings, cautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be under­stood by the operator that common sense and caution are factors which cannot be
built into this product, but must be supplied by the operator.

Do not use the Timing Light if any of the wires are frayed or torn.

Warning! Whenever using the Timing Light, make sure your vehicle is in gear or park,
and the emergency brake is engaged. Park your vehicle on a flat, dry, level surface
when doing any vehicle maintenance.

Unpacking

When unpacking, check to make sure the parts listed on page 7 are included. If any parts
are missing or broken, please call Harbor Freight Tools at the number on the cover of this
manual as soon as possible.

SKU 03343

Page 3