Harbor Freight Tools 31980 Product manual

TWISTING ATTACHMENT

FOR 31980

Model

36620

ASSEMBLY AND OPERATING INSTRUCTIONS

Visit our website at: http://www.harborfreight.com

Read this material before using this product.

Failure to do so can result in serious injury. SAVE THIS MANUAL.

contained herein may be reproduced in any shape or form without the express written consent of Harbor

Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improve-

ments, actual product may differ slightly from the product described herein. Tools required for assembly

and service may not be included.

For technical questions or replacement parts, please call 1-800-444-3353.

Revised Manual 11b

SPECIFICATIONS

ITEM 36620

Capacity 1/2” Pickets; 36” Long

Metal Type Hot Rolled, Square Mild Steel

Handle 25” x 1-1/4”

SAVE THIS MANUAL

You will need this manual for the safety instructions , operating instructions, and parts list. Put it in a safe, dry place for future reference. Keep your invoice with this manual. Write the

invoice number on the inside front cover.

READ ALL INSTRUCTIONS BEFORE ASSEMBLING OR

OPERATING THIS TOOL!

SAFETY WARNINGS & CAUTIONS

WARNING: When using electric tools, machines or equipment, basic safety precautions should

always be followed to reduce the risk of re, electric shock, and personal injury.

READ ALL INSTRUCTIONS BEFORE USING THIS TOOL

KEEP WORK AREA CLEAN.1. Cluttered areas invite injuries.

CONSIDER WORK AREA CONDITIONS.2. Don’t use in damp, wet, or poorly lit locations. Do

not expose to rain. Keep work area well lit.

KEEP CHILDREN AWAY. 3. All children should be kept away from the work area. Don’t let them handle machine.

STORE IDLE EQUIPMENT.4. When not in use, tools should be locked up in a dry location to inhibit rust. If possible, store in an area out of reach of children.

DO NOT FORCE THE MACHINE OR TOOL.5. It will do the job better and more safely at the

rate for which it was intended.

USE THE RIGHT TOOL.6. Don’t force a small tool or attachment to do the work of a larger industrial tool. Don’t use a tool for a purpose for which it was not intended.

DRESS PROPERLY. 7. Don’t wear loose clothing or jewelry. They can be caught in moving parts.

Protective gloves and non-skid footwear are recommended when working. Wear restrictive hair covering to contain long hair, preventing it from getting caught in machinery.

USE EYE AND EAR PROTECTION. 8. Use a full face mask if the work you’re doing produces

metal lings, dust or wood chips. Goggles are acceptable in other situations. Wear a clean dust mask if the work creates a lot of ne or coarse dust. When operating for extended periods

of time, use approved ear protection. Safety goggles and ear protectors are available from Harbor Freight Tools.

Page 2 -- SKU: 36620

SECURE WORK. 9. Use clamps or a vise to hold the work if possible. It’s safer than using your hands and it frees both hands to operate the tool.

DO NOT OVERREACH. 10. Keep proper footing and balance at all times.

MAINTAIN TOOLS WITH CARE. 11. Keep tools sharp and clean for better and safer

performance. Follow instructions for lubricating and changing accessories. Keep handles dry, clean, and free from oil and grease.

STAY ALERT.12. Watch what you are doing, use common sense. Don’t operate any tool when you are tired.

CHECK DAMAGED PARTS. 13. Before using any tool, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and other conditions that may affect its operation. Any part that is damaged should be properly repaired or replaced by an authorized service center unless otherwise indicated elsewhere in the instruction manual.

REPLACEMENT PARTS AND ACCESSORIES.14. When servicing, use only identical replacement parts. Only use accessories intended for use with this tool. Approved accessories are available from Harbor Freight Tools.

DO NOT OPERATE TOOL IF UNDER THE INFLUENCE OF ALCOHOL OR DRUGS.15.

Read warning labels on prescriptions to determine if your judgment or reexes are

impaired while taking drugs. If there is any doubt, do not operate machine.

UNPACKING

When unpacking, refer to the list below. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual.

NO. ITEM DESCRIPTION QTY

NA Handle & Grip Assembly 1

05 Bracket 1

06 Lower Frame 1

07 Frame Bolt 1

08 Frame Bolt Knob 1

09 Depth Stop 1

10 Depth Stop Lock Knob 1

Page 3 -- SKU: 36620

+ 5 hidden pages