Harbor Freight Tools 30131 Owner's Manual
SPECIFICATIONS
PERSONAL SAFETY
2 Forged Safety Latch Hooks
Cable extends to: 44”
Drop forged steel hanging bracket
Heavy duty 3/16” Steel Cable
Pulling Capacity: 1200 LB.
One piece double ratchet gear
Save This Manual
You will need this manual for the
safety warnings and precautions, assembly, operating, inspection, maintenance
and cleaning procedures, parts list and
assembly diagram. Keep your invoice
with this manual. Write the invoice number on the inside of the front cover. Write
the product’s serial number in the back of
the manual near the assembly diagram,
or write month and year of purchase if
product has no serial number. Keep this
manual and invoice in a safe and dry place
for future reference.
GENERAL SAFETY RULES
1. Stay alert. Watch what you are doing, and use common sense when
operating. Do not use while tired
or under the inuence of drugs, alcohol, or medication. A moment of
inattention while operating may result
in serious personal injury.
2. Dress properly. Do not wear loose
clothing or jewelry. Contain long
hair. Keep your hair, clothing, and
gloves away from moving parts.
Loose clothes, jewelry, or long hair
can be caught in moving parts.
3. Do not overreach. Keep proper
footing and balance at all times.
Proper footing and balance enables
better control.
4. Use safety equipment. Always
wear eye protection. Nonskid safety shoes and a hard hat must be used
for appropriate conditions. Always
wear ANSI-approved safety goggles
and work gloves when using or performing maintenance on this tool.
WARNING Read all safety
warnings and instructions.
Failure to follow the warnings and
instructions may result in electric
shock, re and/or serious injury.
Save all warnings and
instructions for future reference.
WORK AREA
1. Keep your work area clean and
well lit. Cluttered benches and dark
areas invite accidents.
2. Keep bystanders, children, and
visitors away. Distractions can
cause you to lose control.
TOOL USE AND CARE
1. Do not force the tool. Use the
correct tool for your application.
The correct tool will do the job better
and safer at the rate for which it is
designed. Do not force the tool and
do not use the tool for a purpose for
which it is not intended.
2. Store idle tools out of reach of chil-
dren and other untrained persons.
Tools are dangerous in the hands of
untrained users. Never allow Children
to come in contact with this product.
Page 2ITEM 30131 For technical questions, please call 1-888-866-5797.
3. Maintain tools with care. Do not use
a damaged tool. Tag damaged tools
“Do not use” until repaired.
4. Check for misalignment or binding
of moving parts, breakage of parts,
and any other condition that may
affect the tool’s operation. If damaged, have the tool serviced before
using. Many accidents are caused
by poorly maintained tools.
regularly. Check for fraying, kinks,
broken strands, or distortion. If they
appear, the Cable should be replaced
immediately .
5. When this tool is being used to
pull an object, make sure the Stop
Pawl Spring is engaged.
6. Do not pull Cable over or around
a corner. Do not wrap Cable around
any object and hook it back on itself.
SERVICE
1. Tool service must be performed
only by qualied repair personnel.
Service or maintenance performed by
unqualied personnel could result in
a risk of injury.
2. When servicing a tool, use only
identical replacement parts. Use of
unauthorized parts or failure to follow
maintenance instructions may create
a risk or injury.
SPECIFIC SAFETY RULES
1. Maintain labels and nameplates
on the tool. These carry important
information. If unreadable or missing, contact Harbor Freight Tools for a
replacement.
7. Know how much load you are pull-
ing. DO NOT OVERLOAD.
8. Never use a “cheater” pipe or
other device to lengthen the handle for additional leverage. This
will cause it to bend or break thereby
destroying the tool.
9. DO NOT operate this tool with
less than 3 wraps of Cable on the
Spindle.
10. Always use an adequate sling, eyebolt or other accessories attached
to the load to be pulled. Always
make sure that there is a positive
engagement of the puller hook to the
load.
11. THIS PULLER IS NOT FOR LIFT-
ING!
2. This Puller is not for aircraft purposes or for linking towed vehicles.
3. This Puller is not for overhead
pulling or lifting. This tool is not to
be used for lifting people or animals.
Not for to be used for climbing purposes.
4. Before each use: Inspect all “E”
clips making sure they are installed correctly. Inspect the Cable
12. Keep ngers and hands clear of
the ratchet and cable at all times.
Page 3ITEM 30131 For technical questions, please call 1-888-866-5797.
Loading...