Harbor Freight Tools 05107 Product manual

IMPORTANT SAFETY INFORMATION

Service Cart Safety Warnings

1. Do not ride or climb on cart. Keep away from children.

2. Do not exceed 220 lb. capacity, evenly distributed.
Be aware of dynamic loading!
Sudden load movement may briefly create
excess load causing product failure.

3. Use only on a flat, level surface able
to support Cart and load.

4. Wear ANSI-approved safety
goggles during assembly.

5. Inspect before every use; do not use
if parts are loose or damaged.

6. Maintain product labels and nameplates.
These carry important safety information. If
unreadable or missing, contact Harbor
Freight Tools for a replacement.

SAVE THESE INSTRUCTIONS.

Assembly Instructions

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this

manual including all text under subheadings therein before set up or use of this product.

Note: For additional information regarding the parts listed in the following pages,

refer to the Assembly Diagram near the end of this manual.

Unwrap and separate all parts on a clear work area.

Attaching Posts to Bottom Tray

Lay the Bottom Tray (2) (the tray with four sets
of four holes on the bottom) on the floor and
attach the Posts (7) to the outside corners of
the tray using sixteen Bolts (9), Washers (11),
Lock Washers (10), and Nuts (8).

Bolt (9)

Bottom Tray

(2)

Figure 1

Post (7)

Washer (11)

Nut (8)

Lock Washer

(10)

Page 2 For technical questions, please call 1-800-444-3353. Item 05107

Attaching Top Tray

Attach Top Tray (1) to the other end of the
legs using twelve Bolts (9), Washers (11),
Lock Washers (10), and Nuts (8). (Four holes
on one end of the top tray are reserved for
attaching the Handle in the next step.)

Top Tray (1)

Figure 2

Bolt (9)

Washer (11)

Post (7)

Lock Washer (10)

Nut (8)

Attaching Handle

Assemble the Handle Brackets (6) onto ends
of Handle (4) and attach Handle to end of
Posts (7) using four Bolts (12), Washers (11),
Lock Washers (10), and Nuts (8).

Figure 3

Post (7)

Lock Washer

(10)

Nut (8)

Note: For ease of assembly,
set the Cart on its side and
work on two legs at a time.

Bolt (12)Washer (11)

Handle (4)

Handle Bracket

(6)

Page 3For technical questions, please call 1-800-444-3353.Item 05107

Assembly Instructions (continued)

Attaching Wheels

1. Decide on which end of the cart to mount the
pair of Rigid Wheels (5) and pair of Swivel
Wheels (3). For example, mounting the Fixed
Wheels on the Handle end of the Cart will make
a push cart like those in a grocery store.

Bolt (13)

2. Attach each Fixed Wheel to one end of
the Bottom Tray using four Bolts (13),
Lock Washers (14) and Nuts (15).

3. Attach each Swivel Wheel to the remaining
end of the Bottom Tray using the remaining
Bolts (13), Lock Washers (14) and Nuts (15).

Bottom Tray (2)

Rigid Wheel (5)

Lock Washer (14)

Nut (15)

Swivel Wheel (3)

Figure 4

Page 4 For technical questions, please call 1-800-444-3353. Item 05107

Specifications

Capacity 220 lb.

Tray Depth 3-1/2"

Wheels 4" Rubber Casters

Dimensions 33" L x 16-3/4" W x 30-1/4" H

Page 5For technical questions, please call 1-800-444-3353.Item 05107

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM
IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR
MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS
QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE
ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND
LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY
ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS
THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

Record Product’s Serial Number Here:

Note: If product has no serial number, record month and year of purchase instead.

Note: Some parts are listed and shown for illustration purposes only,

and are not available individually as replacement parts.

Page 6 For technical questions, please call 1-800-444-3353. Item 05107

Parts List and Assembly Diagram

Part Description Qty

1 Top Tray 1
2 Bottom Tray 1
3 Swivel Wheel 2
4 Handle 1
5 Rigid Wheel 2
6 Handle Bracket 2
7 Post 4
8 Nut M6 32

10

8

1

Part Description Qty

9 Bolt M6 x 12 28
10 Lock Washer 32
11 Washer 32
12 Bolt M6 x 15 4
13 Bolt M8 x 12 16
14 Lock Washer 16
15 Nut M8 16

11

4

12

6

13

9

7

2

3

5

14

15

Page 7For technical questions, please call 1-800-444-3353.Item 05107

Limited 90 Day Warranty

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards,
and warrants to the original purchaser that this product is free from defects in materials and workmanship for the
period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly,
to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper
installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries
to persons or property, or for incidental, contingent, special or consequential damages arising from the use of
our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.

To take advantage of this warranty, the product or part must be returned to us with transportation charges
prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.
If our inspection verifies the defect, we will either repair or replace the product at our election or we may
elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will
return repaired products at our expense, but if we determine there is no defect, or that the defect resulted
from causes not within the scope of our warranty, then you must bear the cost of returning the product.

This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • [phone]