Hanwha Techwin SNHE6110BN User Manual

http://www.emc2000.co.kr

FCC TEST REPORT

EMC

compliance Ltd.

65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 443-390, Korea 82-31-336-9919 (Main) 82-505-299-8311 (Fax)

This test report shall not be reproduced, except in full, Without the written approval.

Report No.: EMC-FCC-R0168

User Manual

SAMSUNG SMARTCAM

0678

User Manual

SNH-E6110BN

Samsung SmartCam

User Manual

Trademark

is the registered logo of Samsung Techwin Co., Ltd. The name of this product is the registered trademark of Samsung Techwin Co., Ltd. Other trademarks mentioned in this manual are the registered trademark of their respective company.

Restriction

Samsung Techwin Co., Ltd shall reserve the copyright of this document. Under no circumstances, this document shall be reproduced, distributed or changed, partially or wholly, without formal authorization of Samsung Techwin.

Disclaimer

Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility. Samsung Techwin reserves the right to change the contents of this document without prior notice.

SPECIFY SERVICE INSTRUCTIONS AND WARRANTY TERMS

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE

CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.

Operational Description

The operational description shall fulfil the requirements of Rule Part 2.1033(b)(4). The rule part requires, "A brief description of the circuit functions of the device along with a statement describing how the device operates. This statement should contain a description of the ground system and antenna, if any, used with the device".

The above requirement has been further interpreted by the FCC to mean that the description shall:

a. be an operational or technical description of how the device operates, is modulated and meets requirements;

b. describe the EUT completely. What is it (in plain English as well as technical terms)? Give a clear, concise functional description of device operation.

c. always describe the signal, such as modulation type, pulse repetition rate, signal type and information being sent. Describe all modulation types and all data rates.

Instructions & Warranty

The manufacturer is not responsible for any loss or radio/TV interference caused by unauthorized modification of the product.

Such modification will void the warranty of the product as well as the user’s right of use.

WARNING

• The product must be assembled and installed by an adult.

• Before using, read all instructions on this manual thoroughly and follow operational

instructions, warnings on this manual and printed on the product.

• To avoid entangled power cord, do not place it around the baby bed or other infant furniture. Keep this product and its power cord out of children’s reach.

• Especially, the power cord should be installed carefully while keeping it out of children’s reach.

• Never use the product near bath tub, sink, washing machine and in wet basement to avoid moisture.

• The product is designed for indoor use.

• The product is not designed for medical monitoring, and requires a grown-up’s

protective supervision on its use.

• To avoid overheating of the product, do not expose the product to direct sunlight; do not install or use near a heat source such as heater, radiator, cooking devices (ex: electric stove or oven) and other warming devices (ex: audio amplifier, TV, etc.).

• Make sure to keep ventilated while using the product. Avoid pillar or furniture that may block ventilation, when installing the product.

• Make sure to use the power adaptor provided. If used with unidentified adaptor, it may damage the product. The power adaptor must be used with regular household electric supply.

• Avoid sharp, pointed objects around the adaptor’s cable, not to damage the cable.

• Be warned and never hold the cable’s stripped part when connecting / disconnecting

the adaptor to/from the wall outlet.

• To avoid entangled cable lines, avoid using cable extension for adaptor’s power cord.

• The product’s servicing is allowed only to authorized Samsung Techwin’s service

personnel.

• When using the product for children’s care, be careful to keep the product out of children’s reach.

• The product partially contains component which might cause respiration difficulty. Accessories and small parts of the product should be stored keeping out of children’s reach.

• The product is not designed to replace responsibility of human supervision on children.

• The product is not equipped with device of immediate notification to adult with accidental/sudden children‘s move; it requires periodic checks and human supervision.

• This appliance and its antenna must not be collocated or operation in conjunction with any other antenna or transmitter. A minimum separation distance of 20 cm must be maintained between the antenna and the person for this appliance to satisfy the RF exposure requirements.

Contents

GETTING STARTED

Features ……………………………………………………… 4

What’s Included ……………………………………………… 5

Part names and functions …………………………………… 6

INSTALLATION & NETWORK CONNECTION

Installation …………………………………………………… 8

Network Connection and Settings …………………………… 9

MONITORING

Registration …………………………………………………… 10

Live Video …………………………………………………… 13

Setup ………………………………………………………… 15

Event Alarm ………………………………………………… 21

Information …………………………………………………… 22

APPENDIX

Specifications ………………………………………………… 24

Troubleshooting ……………………………………………… 27

GettinG Started

Features 4

What’s Included 5

Part names and functions 6

Power Supply 7 Network connection 7

Features

• Easy to install

- Simply visit the home page (www.samsungsmartcam.com) and download and install the program without a separate installer program.

• Remote monitoring

- Whenever and wherever if you are in the Internet enabled environment, remote monitoring is ready for you.

- PC, laptop or smart phone can be used for monitoring.

• Real-time alarm

- When a motion and sound are detected, your smartphone will generate real time alarms.

• Cloud Storage

- Users can automatically upload event photos to their Picasa accounts.

- Anytime anywhere you can enjoy the video and images stored in the cloud storage.

• Two-way Audio

- With the built-in speakers and microphone, you can make Two-way communications. However, it is available only with the smart phone. (Not applicable to the PC or laptop computer.)

• SNS (Social Networking Service) Alarm supported

- Provide event alerts through Picasa.

- Share your photos with your friends.

• IR LED

- At low illumination levels, you can use an IR LED for monitoring purposes.

· English

Getting Started

What’s Included

Check for components when opening the product package.

Camera Power Adaptor Quick Start Guide Warranty Card

GPL Lisence

` Please save the packaging. You will need the serial number later to register the camera.

Part names and functions

· English

Camera lens Speakers

Built-in Mic

Power / Wi-Fi status LED

Generate audio output from your smart phone.

Wi-Fi Direct button

Create a Wi-Fi connection for your camera and smart phone.

Reset button

Resets the camera settings to the default. Press and hold for about 10 seconds to reboot the system.

DC 5V Power Input

Connect to the power adoptor.

Getting Started

Power Supply

Network connection

Plug-in the camera power adapter to the wall outlet and connect the camera as shown.

` Make sure to use the provided power adaptor. If you use an adaptor other than the

power supply adaptor provided in our package, the product may not operate properly.

` It will take about 1min for the camera to boot-up completely. ` When the boot-up is complete, the power LED color will change from red to blue.

Connect the provided network cable to the camera’s network terminal.

For further details on network configuration, refer to “Network Connection and

Settings”. (Page 9)

LED status

LED indicator shows operational status with colors.

Refer to table below for detailed meaning of the LED indicator.

Color Status

Red Booting up

Red Blinking Booting completed / Establishing network connection

Blue Blinking Connecting to the network.

Blue Local connection established

Green Connection to server completed / Normal operation

Magenta Updating firmware

inStallation & network ConneCtion

Installation

Precautions

1. Install the camera in a place where the Wi-Fi signal can be reached and

without interference.

2. Keep it away from humidity such as around the humidifier.

3. Keep it away from direct sunlight, strong light or dust; install it in a place with

clear view.

4. Do not install it in a place where there are a lot of obstacles.

5. Keep the lens clean at all times.

Wipe off the dust with a soft cloth.

· English

Installation 8

Precautions 8 Adjusting the Angle 8

Network Connection and Settings 9

Precautions 9 Conneting using Wi-Fi WPS feature 9

Adjusting the Angle

1. Adjust the camera’s shooting angle as

appropriate.

Installation & Network Connection

Network Connection and Settings

Precautions

• The wireless network access may fail, depending on the communications environment.

• For details about the network settings and password, contact your network administrator or service provider.

• For a specific Internet service requiring user authentication, you may not access the service. If this is the case, contact the service provider.

• Do not access the unauthorized network.

• The farther the distance from the Wireless Access Point, the longer time the

network connection may take.

• If you fail to access the selected wireless network, try a different Wireless Access Point to make access.

• For more information about the router or the wireless connection, refer to the documentation of the router or contact the router manufacturer.

• If the camera is connected to a multiple-Wireless Access Point network environment, some video packets may be lost, depending on the network traffic load.

• According to the network policy (blocking UDP) of the service provider, the video transmission can be limited to 7 minutes. For more details, refer to the descriptions on page 15, <Relay Mode>.

• In addition to the above two situations, you may encounter a network delay or interruption due to the network conditions.

• Some hubs can have compatibility issues.

Conneting using Wi-Fi WPS feature

What is WPS?

WPS enables to make connection between the camera and the Wireless Access Point with a simple click of the button.

1. When you apply the power, the power status LED is lit red, and it will change

to red blinking when the booting is completed.

2. Press the WPS button on the camera for 5sec.

Wi-Fi Direct button

3. Register and select the camera according to guide of mobile guide.

4. Set your wireless network environment using the guideline <Network> on

page 17.

` Registration is available only on the mobile camera.

mobile

` Using the camera's Wi-Fi Direct function, you can easily make a Wi-Fi connection from

your mobile phone.

` If you fail to connect to the Internet service, contact the service provider for details.

+ 21 hidden pages