Hanwha Techwin SEP102CRW, SEM3049W User Manual

BabyView eco PT

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings, install in accordance with the manufacturer’s

instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/ accessories specified by the manufacturer.

12. Unplug this apparatus during lighting storms or when unused for long periods of

time.

13. Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

User Manual

Hanwha Techwin

Trademark

Each of trademarks herein is registered. The name of this product and other trademarks mentioned in this manual are the registered trademark of their respective company.

Restriction

Copyright of this document is reserved. Under no circumstances, this document shall be reproduced, distributed or changed, partially or wholly, without formal authorization.

Disclaimer

Hanwha Techwin

document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility. change the contents of this document without prior notice.

English ·

Co., Ltd. All rights rese rved.

makes the best to verify the integrity and correctness of the contents in this

Hanwha Techwin

reserves the right to

SPECIFY SERVICE INSTRUCTIONS AND WARRANTY TERMS

FCC Compliance Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Industry Canada Statement

This device complies with RSS-247 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Ce dispositif est conforme à la norme RSS-247 d’Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable.

WARNING

• STRANGULATION HAZARD - Keep cord out of child's reach. NEVER place camera or cords

within 3 feet of crib or playpen. Never use extension cords with AC Adapters. Only use the AC Adapters provided.

• Some adult assembly or installation required.

• This product contains small parts that may cause choking. Keep small parts away from

children.

• This product is NOT intended to replace proper supervision of children. You MUST check

your child’s activity regularly, as this product will not alert parents to silent activities of a child.

• Before using this product, read and follow all instructions contained in this booklet, and read and follow all instructions and warnings on the product.

• NEVER use the transmitter or monitor near water, including near a bathtub, sink, laundry tub, wet basement, etc.

• This product is intended for indoor use only.

• This product is not intended for use as a medical monitor and its use should not replace adult supervision.

• The transmitter detects normal sound levels within a range of 2 to 3 meters (6 to 10 feet) from a child. If the child moves outside of this range, it may not be able to detect sounds from him or her.

• It is essential that you check the operating range and condition of the transmitter monitor on initial installation, and on a regular basis after that.

• Check reception regularly. Test monitor before use and after changing camera location.

• Do not take apart the product by yourself.

• To prevent overheating, keep the product and AC power adapters away from any direct sunlight and heat sources such as radiators, heat registers, cooking devices (e.g., stoves and ovens) and other appliances that produce heat (e.g., amplifiers, televisions and stereos).

• Ensure that the product is well ventilated during use. Avoid contact with pillows and furniture that may block ventilation.

• Use only the AC adapters provided with the product, as other adapters may damage the product. Plug the adapters only into standard household current (100~240 volts AC). Place the AC adapters avoiding pinch points otherwise you can damage the adapters.

• When an AC adapter is plugged into a power source, DO NOT touch the exposed end of the AC adapter’s cord.

• Do not use extension cords with the AC power adapters to avoid entanglement.

• This product should only be serviced by qualified and authorized Hanwha Techwin service centers.

• Images and sounds are transmitted by the product over public airwaves and transmissions may be picked up by other units. (Although the transmission distance is 328ft or longer, it may vary depending on whether there are obstacles between the camera and the monitor.)

• Caution: If you use the system to watch a young child, do not place the camera where the child can reach.

• When using the system with only battery power and the charge is low, then the picture and or sound may affected.

• If this occurs then please connect the AC power adapter.

CAUTION

• Risk of explosion if battery is replaced by an incorrect type.

• Immediately discontinue use of the product if the battery or battery door is swollen or bulging which may be a precursor to overheating batteries.

• It is good practice to periodically remove the battery door at the back of the monitor to check if the battery has any signs of deformations.

• Do not let a loose battery come in contact with metal objects such as coins, keys or jewellery.

• Dispose of used batteries according to the instructions.

The transmission range of the wireless signal may weaken if heavy obstructions such as a concrete, brick, or metal walls are between the camera and monitor, or if there are several Wi-Fi routers and devices in your environment.

To avoid interference with RF signal, keep your cell phone at least 3ft away from the Camera and Monitor.

English ·

What’s Included (Package Contents)

Wireless Camera Wireless Monitor

` Check the package to confirm that you have received all the components for the system as shown above.

` You must have more than one camera configured to the system when using functions that require more than one camera.

Product Overview

3 4

5 6

7 8

10 11

Camera / Monitor Adapters

Mounting Screw Kit

User Manual / Warranty Card

22 23 24

1. Antenna

2. Power On/Off

3. Sound Indicator LED

4. Lullaby Button

5. DC 5V Power Input

English ·

6. Talk Button

7. Status LED

8. ECO LED

9. Mode Button

10. Microphone (Monitor)

11. Color TFT 4.3" LCD

12. Directional / OK Button

13. Speaker

14. Kick Stand

15. Battery

16. IR LEDs

17. Low Light Sensor

18. Lens

19. Microphone (Camera)

20. Speaker

21. Power Slide Switch

22. Antenna

23. DC 5V Power Input

24. Temperature Sensor

25. Pair Button

26. Reset Button

27. Tripod Hole

28. Wall Mount Hole

+ 9 hidden pages