Hantek DMM-365A, DMM-365B, DMM-365C, DMM-365D, DMM-365E User Manual

Bluetooth/USB Data Logger

USER’S MANUAL

DMM-365A/B/C/D/E/F

V 1.0.3

Content

General Safety Summary ..................................................................................................1

Chapter 1 Getting Start ......................................................................................................3

1.1 General Check ........................................................................................................4

1.2 The User interface ..................................................................................................5

1.3 Install Software .......................................................................................................7

1.4 Install Driver ..........................................................................................................10

1.5 Connect to Bluetooth ............................................................................................13

Chapter 2: Operating Data Logger .................................................................................17

2.1 Making Voltage Measurement ..............................................................................18

2.2 Making Current Measurement ..............................................................................20

2.3 Measuring Resistance Values ..............................................................................23

2.4 Making a Diode Measurement..............................................................................24

2.5 Making a Capacitance Measurement ...................................................................26

2.6 Selecting Automatic/Manual Range Adjustment ..................................................27

2.7 Taking a Relative Measurement ...........................................................................27

2.8 Temperature Measurement ..................................................................................28

Chapter 3: Appendix ........................................................................................................30

Appendix A Specifications ..........................................................................................31

Appendix B: Accessories ............................................................................................33

Appendix C: General Maintenance ............................................................................34

Safety Summary

USER’S MANUAL 1

General Safety Summary

Review the following safety precautions carefully before operate the device to avoid any personal
injuries or damages to the device and any products connected to it. To avoid potential hazards
use the device as specified by this user’s guide only.

 To Avoid Fire or Personal Injury.

 Correctly Plug in and Pull out. When the Data Logger probes are connecting to the voltage

source, please do not plug in or pull out.

 Check All Terminal Ratings. To avoid fire or shock hazard, observe all ratings and markings

on the product. Consult the product manual for further ratings information before making
connections to the product.

 Do Not Operate With Suspected Failures. If suspected damage occurs with the device,

have it inspected by qualified service personnel before further operations.

 Provide Proper Ventilation. Refer to the installation instructions for proper ventilation of the

device.

 Do not operate in Wet/Damp Conditions.

 Do not operate in an Explosive Atmosphere.

 Keep Product Surfaces Clean and Dry.

Safety Summary

USER’S MANUAL 2

Safety Information

In order to ensure the correct using and the best efficient service, please carefully read the user’s

manual.

System Symbols

These symbols may appear in this manual or on the Data Logger.

Warning: “Warning” identifies conditions and actions that pose hazards to the

users.

Caution: “Caution” identifies conditions and actions that may damage the product

or other properties.

DANGER： Refer to Protective Chassis grand Earth(grand)
High Voltage the manual Condutor Terminal Terminal

System Terms

The following terms may appear on the Data Logger:
Danger: The term “Danger” is used in the manual to indicate that when you read this mark,

personal injury may be caused to immediately.

Warning: The term “Warning” is used in the manual to indicate that when you read this mark,

personal injury may not be caused to you immediately, but you need to be cautionary.
Notice: The term “Notice” is used in this manual to indicate that damages may be caused on
this product or other properties.

Getting Start

USER’S MANUAL 3

Chapter 1 Getting Start

 General Check

 The User interface

 Install Software

 Install Driver

Getting Start

USER’S MANUAL 4

1.1 General Check

When you have got a new DMM-365 series Data Logger, it is suggested that you should perform
a general inspection on the instrument according to the following steps:

 Check the shipping container for damage:
Keep the damaged shipping container or cushioning material until the contents of the shipment

have been checked for completeness and the instrument has been checked mechanically and
electrically.

 Check the accessories:
Accessories supplied with the instrument are listed in “Accessories” in this manual. If the contents

are incomplete or damaged, please notify our distributor at your local area or the sales
department.

 Check the instrument:
In case there is any mechanical damage or defect, or the instrument does not operate properly or

fails performance tests, please notify our distributor at your local area or the sales department.

Getting Start

USER’S MANUAL 5

1.2 The User interface

Click the software icon on the desk after you finished the software setting and equipment
connecting. Then a user interface will be showed as follows.

Description:

1. Data List

2. Description

DC: DC voltage/DC current measurement
AC: AC voltage/AC current measurement

: Diode measurement

: On-Off test

: Capacitance measurement

3. Manual/Auto: Select manual or auto measurement type.

4. Measured value

5. Trend chart

6. Voltage button

7. Current button

8. Resistance button

Getting Start

USER’S MANUAL 6

9. Diode button

10. On-Off test

11. Capacitance button

12. Temperature measurement

13. DC: click DC to switch to AC.

14. Auto: Click Auto to switch to Manual mode

15. Relative Measurement

16. Stop/Run: Stop or start acquire data

17. Help menu

18. Data Interval: 1s~100s

19. Save data

20. Clear data list

Getting Start

USER’S MANUAL 7

1.3 Install Software

Caution: You must install the software before using the Data Logger.

1. While in Windows, insert the installation CD into the CD-ROM drive.

2. The installation should start up automatically. Otherwise in Windows Explorer, switch to the
CD-ROM drive and run Setup.exe.

3. The software Installation is started. Click 'Next' to continue.

Getting Start

USER’S MANUAL 8

4. Choose a Setup Type directory. Click 'Next' to continue.

Getting Start

USER’S MANUAL 9

5. Check the setup information. Click Next to start copying of Files.

6. Updating System Configuration.

7. The installation is complete.