HAMPTON BAY Parker Ridge Owner's Manual

Parker Ridge
44

in Ceiling Fan

Owner’s Manual

Parker Ridge
Ventilador de Techo de 1,12

m

Manual del Propietario

288 272

Parker Ridge by Hampton Bay

®

44” Parker Ridge

Ceiling Fan by Hampton Bay

Date Purchased

Store Purchased

UL Model No.

Serial No.

Vendor No.

UPC

Thank you for purchasing our ceiling fan. This product has been
manufactured with the highest standards of safety and quality.

Table of Contents

Safety Rules . . . . . . . . . . . . . . . . . . . . 1

Unpacking Your Fan . . . . . . . . . . . . . . 2

Installing Your Fan . . . . . . . . . . . . . . . 3

Installing the Light Kit . . . . . . . . . . . 8

Operating Your Transmitter . . . . . . . . . . 9

Care of Your Fan . . . . . . . . . . . . . . . . 11

Troubleshooting . . . . . . . . . . . . . . . . . 11

Specifications . . . . . . . . . . . . . . . . . . 12

Warranty Information . . . . . . . . . . . . 13

288-272

718212240250

219054

Safety Rules - Read and Save These Instructions

1

To reduce the risk of electric shock, insure electricity has been turned off
at the circuit breaker or fuse box before beginning.

All wiring must be in accordance with the National Electrical Code
“ANSI/NFPA 70-1999” and local electrical codes. Electrical installation
should be performed by a qualified licensed electrician.

WARNING: To reduce the risk of electrical shock or fire, do not use this
fan with any solid-state fan speed control device. It will permanently
damage the electronic circuitry.

CAUTION: To reduce the risk of personal injury, use only the screws
provided with the outlet box.

The outlet box and support structure must be securely mounted and
capable of reliably supporting a minimum of 35 pounds. Use only UL
Listed outlet boxes marked “FOR FAN SUPPORT”.

The fan must be mounted with a minimum of 7 feet clearance from the
trailing edge of the blades to the floor.

Avoid placing objects in path of the blades.

To avoid personal injury or damage to the fan and other items, be
cautious when working around or cleaning the fan.

Do not use water or detergents when cleaning the fan or fan blades. A dry
dust cloth or lightly dampened cloth will be suitable for most cleaning.

After making electrical connections, spliced conductors should be turned
upward and pushed carefully up into outlet box. The wires should be
spread apart with the grounded conductor and the equipment-grounding
conductor on one side of the outlet box and ungrounded conductor on the
other side of the outlet box.

All set screws must be checked and retightened where necessary before
installation.

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

WARNING

TO REDUCE THE RISK OF PERSONALL INJURY, DO NOT BEND THE
BLADE ARMS (ALSO REFERRED TO AS FLANGES), WHEN
INSTALLING THE BRACKETS, BALANCING THE BLADES OR
CLEANING THE FAN. DO NOT INSERT FOREIGN OBJECTS IN –
BETWEEN ROTATING FAN BLADES.

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PERSONAL
INJURY, MOUNT FAN TO OUTLET BOX MARKED ACCEPTABLE FOR
FAN SUPPORT WITH THE SCREWS PROVIDED WITH THE OUTLET
BOX.

WARNING

2

Unpacking Your Fan

Unpack your fan and check the contents. You should have the following items:

Set of blades (4)
Mounting bracket
Fan motor assembly
Motor housing
Blade holder plate
Blade medallions (8)

1.

2.

3.

4.

5.

6.

Mounting plate
Light plate
Glass shade
Transmitter+holder+2 mounting screws
100W Halogen bulb

6.

7.

8.

9.

10.

Blade Attachment Hardware
3/16"×9mm Allen Screws (17PCs.)
Rubber Washers (17PCs.)

Electrical Hardware
Plastic Wire Nuts (3PCs.)

Blade Holder Plate Hardware
1/4"×1/2" Screws (11PCs.)

Allen wrench

Balancing Kit

A.

B.

C.

D.

E.

WARNING

DO NOT INSTALL OR USE FAN IF ANY

PART IS DAMAGED OR MISSING.

CALL TOLL FREE 1-800-527-0998.

1

2

3

5

10

11

9

6

7

8

4

AB

C

E

D