HAMPTON BAY Northport 178-047 Owner's Manual

Northport
52

in Ceiling Fan

Owner’s Manual

Northport
Ventilador de Techo de 1,32

m

Manual del Propietario

178 047

Northport by Hampton Bay

®

52” Northport

Ceiling Fan by Hampton Bay

Date Purchased

Store Purchased

UL Model No.

Serial No.

Vendor No.

UPC

Thank you for purchasing our ceiling fan. This product has been
manufactured with the highest standards of safety and quality.

Table of Contents

Safety Rules . . . . . . . . . . . . . . . . . . . . 1

Unpacking Your Fan . . . . . . . . . . . . . . 2

Installing Your Fan . . . . . . . . . . . . . . . 3

Installing the Light Kit . . . . . . . . . . . . 9

Operating Your Fan . . . . . . . . . . . . . 10

Care or Your Fan . . . . . . . . . . . . . . 11

Troubleshooting . . . . . . . . . . . . . . . 11

Specifications . . . . . . . . . . . . . . . . . . 12

Warranty Information . . . . . . . . . . . . 13

718212149263

219054

178-047

Safety Rules - Read and Save These Instructions

1

To reduce the risk of electric shock, insure electricity has been turned off
at the circuit breaker or fuse box before beginning.

All wiring must be in accordance with the National Electrical Code
“ANSI/NFPA 70-1999” and local electrical codes. Electrical installation
should be performed by a qualified licensed electrician.

WARNING: To reduce the risk of electrical shock or fire, do not use this
fan with any solid-state fan speed control device. It will permanently
damage the electronic circuitry.

CAUTION: To reduce the risk of personal injury, use only the screws
provided with the outlet box.

The outlet box and support structure must be securely mounted and
capable of reliably supporting a minimum of 35 pounds. Use only UL
Listed outlet boxes marked “FOR FAN SUPPORT”.

The fan must be mounted with a minimum of 7 feet clearance from the
trailing edge of the blades to the floor.

Avoid placing objects in path of the blades.

To avoid personal injury or damage to the fan and other items, be
cautious when working around or cleaning the fan.

Do not use water or detergents when cleaning the fan or fan blades. A dry
dust cloth or lightly dampened cloth will be suitable for most cleaning.

After making electrical connections, spliced conductors should be turned
upward and pushed carefully up into outlet box. The wires should be
spread apart with the grounded conductor and the equipment-grounding
conductor on one side of the outlet box and ungrounded conductor on the
other side of the outlet box.

All set screws must be checked and retightened where necessary before
installation.

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

WARNING

TO REDUCE THE RISK OF PERSONALL INJURY, DO NOT BEND THE
BLADE HOLDERS (ALSO REFERRED TO AS FLANGES), WHEN
INSTALLING THE HOLDERS, BALANCING THE BLADES OR
CLEANING THE FAN. DO NOT INSERT FOREIGN OBJECTS IN–
BETWEEN ROTATING FAN BLADES.

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PERSONAL
INJURY, MOUNT FAN TO OUTLET BOX MARKED ACCEPTABLE
FOR FAN SUPPORT WITH THE SCREWS PROVIDED WITH THE
OUTLET BOX.

ATTENTION

FAN INCLUDES A 190W LIMITER TO COMPLY WITH THE
DEPARTMENT OF ENERGY 2009 REGULATION. LAMPING THIS
PRODUCT OVER 190W WILL CAUSE THIS FAN TO NOT LIGHT.
PLEASE USE BULBS WITH A TOTAL WATTAGE UNDER THE 190W
REGULATION.

2

Unpacking Your Fan

Unpack your fan and check the contents. You should have the following items:

AB

C

Set of blades (4)

Canopy assembly

Standard Ball/downrod assembly

Minimum-length downrod (for close to
the ceiling installation only)

Coupling cover

1.

2.

3a.

3b.

4.

Fan motor assembly

Light kit mounting plate

Light kit assembly

Glass shade

75 Watt halogen bulb

Pull chains and fobs (2)

5.

6.

7.

8.

9.

10.

Electrical Hardware
(3 Plastic Wire Nuts)

Blade Attachment Hardware
3/16"×12.3mm Screws (13PCs.)
Fiber Washers (13PCs.)

Balancing Kit

A.

B.

C.

WARNING

DO NOT INSTALL OR USE FAN IF ANY

PART IS DAMAGED OR MISSING.

CALL TOLL FREE 1-800-527-0998.

1

2

3a

3b

4

5

6

7

8

9

10