Hamilton Beach 75288 User Manual
f_
I
i i _-_
English .................................................. 2
USA: 1-800-851-8900
Frangais ................................................ 7
Canada : 1-800-267-2826
EspaSol .............................................. 12
En M6xico: 01-800-71-16-100
Le invitamos a leer cuidadosamente este
instructivo antes de usar su aparato.
840122100
Whenusingelectricalappliances,basicsafetyprecautionsshould
alwaysbefollowed,includingthefollowing:
1.Readallinstructions.
2.Toprotectagainstriskofelectricalshock,donotputcanopener
body,cord,orpluginwaterorotherliquid.
3.Closesupervisionisnecessarywhenanyapplianceisusedby
ornearchildren.
4.Unplugfromoutletwhennotinuse,beforeputtingonortaking
offparts,andbeforecleaning.
5.Avoidcontactingmovingparts.
6.Donotoperateanyappliancewithadamagedcordorplug,
oraftertheappliancemalfunctionsorisdroppedordamaged
inanymanner.Callourtoll-freecustomerservicenumberfor
informationonexamination,electricalrepair,mechanicalrepair,
oradjustment.
7.TheuseofattachmentsnotrecommendedorsoldbyHamilton
Beach/Proctor-Silex,Inc.maycausefire,electricshock,orinjury.
8.Donotuseoutdoors.
9.Donotletcordhangoveredgeoftableorcounter,ortouchhot
surfaces.
10.Donotopenpressurized(aerosol-type)cans.
11.Donotopencansofflammableliquidssuchaslighterfluid.
OTHER CONSUMER SAFETY INFORMATION
This appliance is intended for household use only.
This appliance is equipped with a polarized plug. This type of plug
has one blade wider than the other. The plug will fit into an electrical
outlet only one way. This is a safety feature intended to help reduce
the risk of electrical shock. If you are unable to insert the plug into
the outlet, try reversing the plug. If the plug should still fail to fit,
contact a qualified electrician to replace the obsolete outlet. Do
not attempt to defeat the safety purpose of the polarized plug by
modifying the plug in any way.
2
Parts and Features
Can Guide Cutting Blade
Use the flip-up magnet
for ease in checking
correct can position.
Piercing
Lever
Using Your Can Opener
1. Place can opener on level surface.
2. Plug cord into electrical outlet.
3. Raise piercing lever up.
4. Place rim of can firmly under can guide and against geared
wheel.
5. Tilt top of can in, to position cutting blade inside rim of can.
6. Press piercing lever all the way down.
7. The motor will begin turning can and cutting lid. (It is
not necessary to hold the piercing lever down or to hold the
can during the cutting action.)
8. The motor will automatically stop when the can is open.
3
Hints for Best Use
• The can opener will easily open all standard size cans.
On some models it will be necessary to position can
opener at edge of counter, allowing for clearance to
open cans taller than the can opener.
If there is a bump, dent, or heavy seam in rim of can, open
other end of can or start cutter just beyond it.
Cans made with aluminum lids will not adhere to magnet.
The motor of your can opener is permanently lubricated
and will require no oiling.
To use cord storage on back of opener, push in or pull out
cord as needed.
Cleaning Your Can Opener
1. Unplug cord from electrical outlet.
2. Remove complete cutting assembly as
shown. Push piercing lever up and to
the left. It will pop out of a locked
position.
3. Wash cutting assembly in hot, soapy
water. Rinse and dry thoroughly.
4. Wipe body of can opener with damp
cloth. NEVER immerse the can opener
in water.
5. To reassemble, place knob on back of
cutting assembly into large end of
keyhole as shown. Push to the right
until it snaps into place.
Sharpening Knives
This feature on selected models.
1. Place cutting edge of knife in knife
slot located on back of can opener.
2. Draw knife blade through slot several
times.
NOTE: Serrated blades should never
be inserted into this unit.
4 5
The following warranty applies only to product purchased
in the United States and Canada.
LIMITED WARRANTY
This product is warranted to be free from defects in material and workmanship for a
period of two (2)years for Hamilton Beach Portfolio products, one (1) year for Hamilton
Beach products or one hundred eighty (180) days for Proctor-Silex and Traditions
products from the date of original purchase, except as noted below. During this
period, we will repair or replace this product, at our option, at no cost. THE
FOREGOING WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, WHETHER
EXPRESS OR IMPLIED, WRI]q-EN OR ORAL INCLUDING ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. ANY LIABILITY IS
EXPRESSLY LIMITED TO AN AMOUNT EQUAL TO THE PURCHASE PRICE PAID,
AND ALL CLAIMS FOR SPECIAL, INCIDENTAL AND CONSEQUENTIAL DAMAGES
ARE HEREBY EXCLUDED. There is no warranty with respect to the following, which
may be supplied with this product: glass parts, glass containers, cutter/strainer,
blades, and/or agitators. This warranty extends only to the original consumer
purchaser and does not cover a defect resulting from abuse, misuse, neglect, use for
commercial purposes, or any use not in conformity with the printed directions. This
warranty gives you specific legal rights, and you may also have other legal rights
which vary from state to state, or province to province. Some states or provinces do
not allow limitations on implied warranties or special, incidental or consequential
damages, so the foregoing limitations may not apply to you.
If you have a claim under this warranty, DO NOT RETURN THE APPLIANCE TO THE
STORE! Please call our CUSTOMER SERVICE NUMBER. (For faster service please
have model, series, and type numbers ready for operator to assist you.)
CUSTOMER SERVICE NUMBERS
In the U.S. 1-800-851-8900
In Canada 1-800-267-2826
hamiltonbeach.com or proctorsilex.com
KEEP THESE NUMBERS FOR FUTURE REFERENCE!
Loading...