HAMEG 8030-6 User Guide

10 MHz Function Generator
HM8030-6

Frequency range 50 mHz to 10 MHz

High signal purity and amplitude stability

Distortion factor ‹ 0.5 % up to 1 MHz

Output voltage 20 Vpp(10 Vppinto 50 Ω)

Surge- and short-circuit-proof output

Rise and fall time typ. 15 ns

Internal and external sweep

Pulse width adjustment

Highly accurate digital frequency display

Mainframe HM8001-2 required for operation

HZ20 Connector
BNC to 4 mm socket

Option HO801

HZ33, HZ34
Test cable BNC/BNC

10 MHz Function Generator HM8030-6

Valid at 23 °C after a 30 minute warm-up period

Operating modes

Sine, square, triangle, pulse; free running, internal sweep or external fre­quency modulation, with or without DC offset

Frequency ranges

0.05 Hz to 10 MHz in 8 ranges, variable: x 0.09 to x 1.1 (12:1)
Frequency drift: ‹ 0.5 % /hr or 0.8 %/24 hrs. at constant

ambient temperature

Waveform characteristics

Sine wave distortion

0.05 Hz to 1 MHz: max. 0.5 %
1 MHz to 10 MHz: max. 5%

Square wave rise time: typ. 15 ns
Overshoot: ‹ 5 % (for termination into 50 Ω)
Triangle non-linearity: ‹ 1 % (to 100 kHz)

Displays

Frequency: 5-digit, 7-segment LED, each 8 x 5 mm
Accuracy:

up to 5 Hz: ± (1 % + 3 digits)
5 Hz to 10 MHz: ± (5 x 10-5+ 1 digit)

LED indicators for mHz, Hz, kHz and sec

Outputs

Signal output: short-circuit proof,
protected against ext. voltage up to ± 45 VDCmax. (30 sec.)

Impedance: 50 Ω
Output voltage: 10Vppinto 50 Ω load; 20 V

pp

(open circuit)

Attenuation: max. 60 dB
2 attenuators: each 20dB ± 0.2 dB
Variable: 0 to 20 dB
Amplitude error: (sine wave/triangle)

0.05 Hz to 0.5 MHz: max. 0.2 dB
5 Hz to 10 MHz: max. 0.5 dB

DC offset: variable (on/off, except pulse function)

into 50 Ω load: max. ±2.5 V
in open circuit: max. ±5 V

Trigger output: square wave synchronous to

signal output, approx. +5V/TTL

FM input

(VCF, BNC connector on rear panel of HM8001-2 and option HO801)

Frequency deviation: approx. 1:100
Input impedance: 6 kΩ II 25 pF
Input voltage: max. ± 30 V

Internal sweep

Sweep speed: 20 ms to 15s
Sweep range: approx. 1:100

Miscellaneous

Power supply +5V/200mA
(from mainframe): +16V/300mA

-16V/250mA
(∑=9.8W).

Operating temperature: +10° C to + 40° C
Max. relative humidity: 80 % (without condensation)
Dimensions (W x H x D) (without 22-pole flat plug):

135 x 68 x 228 mm

Weight: approx. 0.80kg

HM8030-6E/180107/ce · Subject to alterations · © HAMEG Instruments GmbH · ® Registered Trademark · DQS-certified in accordance with DIN EN ISO 9001:2000, Reg.-No.: DE-071040 QM

HAMEG Instruments GmbH · Industriestr. 6 · D-63533 Mainhausen · Tel [phone] · Fax [phone] · www.hameg.com · [e-mail]

A Rohde & Schwarz Company

www.hameg.com

Accessories supplied: Operator’s Manual
Optional accessories:

HZ33/HZ34 Test Cable 50 Ω (BNC-BNC),
HZ22 50 Ω feed-through terminal,
HZ10S/R Silicone test lead