LED
Infrared LED
L8506
LED emitting collimated light
When an LED is used for optical encoders, it must emit a uniform, small spot light. L8506 is an infrared LED that emits such a light beam
collimated by the combination of an aspheric lens. L8506 uses a non-confined structure chip that does not show an abrupt deterioration often
encountered with some types of confined chips. The structure of L8506 is also designed to have high resistance to cyclic temperature changes so
it copes with tough environmental conditions required for optical encoders used in factories.
Features
l
Collimated light beam
l
Uniform spot light
l
Narrow directivity: ±5˚
l
High-speed response: 40 MHz Typ.
l
High reliability
Applications
l
Optical encoder
l
Optical switch
■ Absolute maximum ratings (Ta=25 °C, unless otherwise noted)
Parameter Symbol Condition Value Unit
Reverse voltage V
Forward current I
Forward current reduction rate - 0.67 mA/°C
Pulse forward current I
Pulse forward current reduction rate
Power dissipation P 150 mW
Operating temperature Topr -30 to +85
Storage temperature Tstg -40 to +100
R
F
Pulse width=10 µs
FP
Duty ratio=1 %
-7mA/°C
5V
80 mA
0.5 A
C
°
C
°
■ Electrical and optical characteristics (Ta=25 °C)
Parameter Symbol Condition Min. Typ. Max. Unit
Peak emission wavelength
Spectral half width
Radiant flux
Forward voltage V
Reverse current I
Spot light size *
Cut-off frequency *
*1: Full width at half maximum, measurement distance (from the sensor to the bottom surface of L8506’s base)=10 mm
*2: Frequency at which the light output drops by -3 dB from that at 100 kHz.
1
2
IF=50 mA 840 870 900 nm
p
λ
IF=50 mA - 45 - nm
∆λ
IF=50 mA 3.4 5.8 - mW
e
φ
FIF
=50 mA - 1.6 1.75 V
R
VR=5 V - - 5 µA
IF=30 mA - 4.3 - mm
fc IF=30 mA ± 4 mAp-p 25 40 - MHz
1
Infrared LED L8506
0 0.5 1.0 1.5 2.0
40
20
60
80
100
FORWARD VOLTAGE (V)
FORWARD CURRENT (mA)
(Typ. Ta=25 ˚C)
4.65 ± 0.15
3.7 ± 0.2
5.3 ± 0.313.5 ± 1.0
5.4 ± 0.2
(0.4)0.6 MAX.
2.54 ± 0.2
0.45
LEAD
■ Directivity ■ Forward current vs. forward voltage
20˚ 10˚ 0˚ 10˚ 20˚
30˚
(Typ. Ta=25 ˚C)
100 %
30˚
80 %
40˚
50˚
60˚
70˚
80˚
90˚
RELATIVE RADIANT OUTPUT (%)
60 %
40 %
20 %
40˚
50˚
60˚
70˚
80˚
90˚
KLEDB0226EA
■ Radiant output vs. ambient temperature
+2
+1
0
-1
-2
RELATIVE RADIANT OUTPUT (dB)
-3
0 20 40 60 80 100
AMBIENT TEMPERATURE (˚C)
100
80
(Typ. IF=50 mA)
KLEDB0228EA
L=5 mm
L=10 mm
KLEDB0227EA
■ Allowable forward current vs. ambient temperature
(Typ.)
100
80
60
40
20
RELATIVE ALLOWABLE FORWARD CURRENT (%)
0
-40 -20 0 20
AMBIENT TEMPERATURE (˚C)
40 60 80 100
KLEDB0229EB
■ Dimensional outline (unit: mm)■ Relative light intensity distribution
IMAGE
SENSOR
L=20 mm
4
KLEDB0230EA
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions.
Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2002 Hamamatsu Photonics K.K.
60
40
20
RELATIVE RADIANT OUTPUT (%)
0
-4 -3 -2 -1 0 2 31
POSITION ON IMAGE SENSOR (mm)
HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho, Hamamatsu City, 435-8558 Japan, Telephone: (81) 053-434-3311, Fax: (81) 053-434-5184, http://www.hamamatsu.com
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 08152-3750, Fax: (49) 08152-2658
France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777
North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01
Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741
2
LED
L
KLEDA0072EC
Cat. No. KLED1035E02
Feb. 2002 DN