PRELIMINARY DATA
10
-7
10
-8
0
50
100
150
10
-6
10
-5
OUTPUT CURRENT (A)
RELATIVE GAIN (%)
10
-4
CONVENTIONAL
MCP (2 stage)
Wide Dynamic Range
MCP (2 stage)
Wide Dynamic Range
MCP (1 stage)
MAY 1998
Compact MCP assembly optimized for helium leak detector and
mass spectrometer using a wide dynamic range MCP
The F4655-01 is a very compact MCP assembly developed for
helium leak detector as well as mass spectrometer. It uses a
wide dynamic range MCP for extr acting a high output current of
10µA* with high stability.
* : At an MCP resistance of 20MΩ
WIDE DYNAMIC RANGE
MCP ASSEMBLY
FOR HELIUM LEAK DETECTO R
F4655-01
FEATURES
Wide dynamic range
Compact and lightweight
Good cost performance
SPECIFICATIONS
GENERAL
Assembly Outer Diameter 30.0 mm
Effective Diameter 14.5 mm
Maximum Height 8.5 mm
MCP Channel Diameter 12
Number of MCP Stages 1 -
A
Two-stage MCP type is also available on request
MAXIMUM RATINGS (Absolute Values)
MCP Supply Voltage (In-Out) 1 kV
MCP-Out to Anode Voltage 0.5 kV
Electric Potential at Each
Terminal
Operating V acuum Condition
Baking T emperature Baking Time - h
Baking Vacuum Condition - Pa (Torr)
B
Baking cannot be performed.
CHARACTERISTICS (at 1.3×10
Gain
Plate Resistance 5 to 50
Dark Current 0.5 pA/cm
Param e ter Value Unit
A
.
MCP-In: -1.5
MCP-Out: -0.5
Anode: GND
-4
-4
Pa (1×10-6 Torr), Ta=+25°C)
6.7×10
1×10
(5×10-6)
B
B
B
4
Pa (Torr)
µ
M
kV
°
TMCPF0089
APPLICATIONS
Helium leak detector
Mass spectrometer
Figure 1: MCP Output Linearity Characteristiscs
m
C
-
Ω
2
TMCPB0080EA
Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office.
Information furnished by HAMAMATSU is believed to be reliable. Ho w e ver, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject
to change without notice. No patent rights are granted to any of the circuits described herein. ©1998 Hamamatsu Photonics K.K.
WIDE DYNAMIC RANGE MCP ASSEMBLY FOR HELIUM LEAK DETECTOR F4655-01
Figure 2: Dimensional Outlines (Unit: mm)
ANODE LEAD
3 - M1.6
P.C.D. 21.5
60°
120°
MCP-IN LEAD
3 - 2.2
P.C.D. 26
18
14.5
EFFECTIVE AREA
3.5
3
MCP-OUT LEAD
SINGLE MCP
12.5
PROTECTION ELECTRODE
FOR CHARGING-UP
15
(SAME POTENTIAL
AS SUBSTRATE)
INSULATOR
0.5
8.5
7.5
4.5
SUBSTRATE
ANODE
INSULATOR
TMCPA0043EA
HAMAMATSU PHOTONICS K.K., Electron Tube Center
314-5, Shimokanzo, Toyooka-village, Iwata-gun, Shizuoka-ken, 438-0193 Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205
U.S.A.
: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone:(1)908-231-0960, Fax:(1)908-231-1218
Germany
: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone:(49)8152-375-0, Fax:(49)8152-2658
France
: Hamamatsu Photonics France: S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone:(33)1 69 53 71 00, Fax:(33)1 69 53 71 10
United Kingdom
North Europe
Italy
: Hamamatsu Photonics UK Limited: Lough Point, 2 Gladbeck Way, Windmill Hill, Enfield, Middlesex EN2 7JA, United Kingdom, Telephone:(44)181-367-3560, Fax:(44)181-367-6384
: Hamamatsu Photonics Norden AB: FŠršgatan 7, S-164 40 Kista, Sweden, Telephone:(46)8-703-29-50, Fax:(46)8-750-58-95
: Hamamatsu Photonics Italia S.R.L.: Via della Moia, 1/E 20020 Arese, (Milano), Italy ,Telephone: (39)2 935 81 733 Fax: (39)2 935 81 741
TMCP1020E01
MAY 1998 SI
Printed in Japan (500)