Haier XPB60-CS-BD1 User Manual

Twin-tub Washing Machine

User's manual

This manual is for

Twin-tub Washing Machine

Please read this manual carefully before using. Retain it for future reference.

Contents

Names of the parts

Safety precautions

Installation and adjustment

Preparation before washing

The musts in washing

Usage of the detergent

Washing sequence

Disposal after washing Trouble-Shooting Answer to question

Packing list

Specification

Names of the parts

Buzzer Water-filling entrance

Water inlet selector handle Wash selector Wash timer Control panel Overflow filter Quick water-filling entrance Water level adjusting lever

Drain hose hook

Lint filter(Installed by user)

Valve cover Pulsator Wash tub

Wash tub cover

Drain hose

Base frame

Outer cover of the spin tub

Inner cover of the spin tub

Spin timer

Spin tub frame

Spin tub

Cabinet Part plastic types,the cabinet and wash tub are integrative

Power cord

Notes 1.Part of types do not have water inlet selector handle.valve cover.quick water-filling entrance.buzzer,according to your purchased model concretely. 2.Discrepancy structure of the water inlet in different machine type,according

to your purchased model concretely.

3.All graphics in this manual are sketch maps,simultaneity,due to the incessant progress,the products and fittings which you had bought may be different from the drawing in this manual,thanks for your kindly understanding

Introduction of the major function

The product utilized integrative save energy technology which can implement wide voltage design,it can be easily started and keep working even in the situation of low voltage,you won't be bothered by the fluctuant voltage.

Meaning and description of the symbols

	Warning sign	Contents marked with that symbol are			related to the safety of
		the product and	the personal safety of the users. Please
		operate in strict conformity to the		contents, otherwise it may
		cause damage of	the machine	or injure the personal safety
		of the user.
	Forbidding sign	Contents marked with that symbol are			actions forbidden to
		perform. Performing of those actions			may result in damage of
		the machine or	injure the personal		safety of he user.

Please check if the power receptacle has good earthing condition before using to guarantee your safety.

Safety precautions

Please insert the power cord into special receptacle with rated voltage.Be sure to use single-phase receptacle.The earthing terminal must be earthed reliably.If possible, please adopt electric leakage protector.

When the machine is normally using, please put the power plug at the location easily to be inserted and extracted by hand. Be sure to pull the plug off when there's power failure, or the machine is being moved, cleaned or when it is idle.

If the power cord is bad, to avoid risk it is required to replace it by the technicians ofour special shop or the after-sale service department. Keep the pin of the power plug clean.

Do not put the machine at damp				Do not use water hotter than 50 C .
place like		the bathroom . Never
wash it		with water. Do not place
wet laundries on the control panel.

In case the washing			machine is installed	Do not wash water-proof laundries like
on ground	with	carpet , do not block the		the raincoat, bike covers etc. to avoid
ventilation	hole	with	carpet.	abnormal vibrations in spinning.

Ventilation hole at the bottom of the washing machine

Do not let the machine share one receptacle with other electric appliances. If the power plug is damaged, or the plugging into the receptacle is loose, do not use the plug any more.

Safety precautions

Do not stretch hands into the working

Do not decompose, repair or alter the

machine. It is dangerous even if the

machine by yourself.

rotation is slow. Take special care of

the children.

Do not	put	any hot or heavy items	Do not	wash	laundries with volatile
( such	as the	kettle with hot water )	materials	(such	as thinner, petrol etc.).
on the washing machine.

Petrol

Thinner

	Handicapped or children without care	Keep the machine away from direct
		sunlight and heat source like the
	shall not use the machine.
		heater.

To protect your laundries and washing machine, please take out all of the coins, buttons, sand, hairpin and other foreign materials before washing.

Please check if the water faucet is open, and if the connection of the water inlet pipe is proper.

It is suggested to use foamless washing powder.

Installation and adjustment

Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine.

Install the lint filter

After opening the package,please take out the lint filter from the document bag,install it to the overflow filter of the wash tub.See to the figure.

Overflow filter

Lint filter

Usage of the drain hose

The drainage shall be smooth with the drain hose.

1.The	height of the drain	hose shall be
less	than 10cm , or the	drainage will
not be smooth enough and cause							<10cm
incomplete drainage.

2.Do not tramp or press the drain hose.

3.If the drain hose is too long, cut it at mid point.
To make smooth drainage, cut the front end of
the hose slantingly.
4.If extra drain hose is needed , please make
separate purchase. The inner diameter of		the
extra hose shall not less than 30mm, and		the
length shall not exceed 1.5m.		> 30mm
		<1.5m
If	the extra hose is too long, cut it either
at	point A or B.

A B