Haier XPB55-13S User Manual

Specification
User's manual
Type
Model
Power source
Water level Water quantity about
Rated washing capacity kg
Rated spinning capacity kg
Rated input power W
Dimension(mm)
Wash pattern
Weight kg
Injection pressure
Twin-tub washing machine
XPB55-13BS
Rated voltage 220V~ Rated frequency 50Hz
High/43L Medium/36L Low/30L
5.5
4.5
wash 320 spin210
L740 W428 H916
New current
23.5
0.02MPa~0.2MPa
XPB55-13BS
Twin-tub Washing Machine
Contents
Before using
Names of the parts.............the 2nd cover
Safety precautions ...............................1
Installation and adjustment ..................3
Introduction of the major functions .......5
Using process
Preparation before washing ................6
Usage of the detergent .......................8
Washing sequence ..............................9
Disposal after washing .......................13
Trouble-shooting*
Answers to question.....................15
Packing list ......................................17
Please read this manual carefully before using. Please retain it for future reference.
Specification..............the back cover
Names of the parts
Packing list
Buzzer
Water-filling entrance Water inlet selector handle
Wash selector
Wash timer
Control panel
Overflow filter
Water level adjusting lever
Drain hose hanging hole
Hose support Lint filter
Pulsator
Wash tub Drain hose Base frame
Outer cover of the spin tub
Inner cover of the spin tub
Spin timer
Spin tub frame
Spin tub
Power cord
User's manual
Water inlet hose
Water-filling jointer
Lint filter
Gland
Twin-tub washing machine
One
One
One
One
One
One
Accessories
Water-filling jointer
(one piece)
Lint filter
(one piece)
Water inlet hose
(one piece)
Gland
(one piece)
Meaning and description of the symbols
Contents marked with that symbol
Warning sign
Forbidding sign
are related to the safety of the product and the personal safety of the users. Please operate in strict conformity to the contents, otherwise it may cause damage of the machine or injure the personal safety of the user.
Contents marked with that symbol are actions forbidden to perform. Performing of those actions may result in damage of the machine or injure the personal safety of the user.
Trouble-shooting Answer to question
Safety precautions
(If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself.
Phenomena The reason
Is there power failure?
The machine does not act.
The draining does not work
There's abnormal sound during washing
There's abnormal sound and violent vibration during spinning
Is the power plug loose? Is the pulsator twisted by foreign materials?
Is the drain hose put down? Is the drain hose frozen? Is the drain hose blocked by foreign material? Are there laundries falling to the outer side of the spin tub?
Are there hair pin, coins or metal items brought inside the tub?
Is the machine slanting? Is the gland pressed evenly? Are there laundries falling to the outer side of the spin tub? Are the laundries in spin tub too much?
Be sure to use three-phase receptacle. Earth the earthing terminal of the receptacle reliably.
Earth
If the power cord is bad, to avoid risk it is required to replace it by the technicians of our special shop or the after-sale service department. Keep the pin of the power plug clean.
In case the washing machine is installed on ground with carpet, do not block the ventilation hole with carpet.
Ventilation hole at the bottom of the washing machine
When the machine is normally using, please put the power plug at the location easily to be insetred and extracted by hand. Be sure to pull the plug off when there'spower failure, or the machine is being moved, cleaned or when it is idle.
Do not use water hotter than 50 C .
There may be some water flowing out of the drain hose in the first use of the machine.
It is the water remained in the factory inspection of performance.
Do not put the machine at damp place like the bathroom. Never wash it with water. Do not place wet laundries on the control panel.
Do not share one receptacle with other electric appliances. Do not use it in case that the power plug is damaged or the inserting into the receptacle is loose.
Do not wash water-proof laundries such as the raincoat, bicycle shelter etc. To avoid abnormal vibration during spinning.
1
Loading...
+ 7 hidden pages