Haier WM7003A User Manual
WM7003A
User's manual
Computerized Full-auto
Washing Machine
Please read this manual carefully before using.
Retain it for future reference.
Please check if the power receptacle has good earthing
condition before using to guarantee your safety.
The manufacturer will not take responsibility for those
risks occurred from not obeying this manual.
Names of the parts.............the 2nd cover
Safety precautions .............................................1
Installation and adjustment .........................3
Install the water inlet hose............5
Preparation before washing ...............7
Put in the laundries .............................8
Put in the detergent ............................9
Use the operation buttons ...................10
Close the top lid .................................14
Finish washing ...................................14
Disposal after washing .........................15
Trouble shooting..............................16
Packing list.....................................17
Specification................the back cover
CONTENTS
Before using
Using process
Contents marked with that symbol are related to the safety of the product and the personal
safety of the users. Please operate in strict conformity to the contents.
Contents marked with that symbol are actions forbidden to perform. Performing of those
action may result in damage of the machine or influence the personal safety of the users.
Accessories
Meaning and description of the symbols
Cabinet
Drain hose
Hanging hole for
the drain hose
Back cover
Fixing leg
(three pieces)
Adjustable leg
Adjustable leg film
Power cord
Handle
Control pannel sheet
Control pannel
Washbox
Pulsator
Lint filter fixing
Water channel
Filter cap
Top lid
Before Using
Before Using
Names of the parts
Water inlet valve
Inner tub
Notice film
1 piece
8 pieces
bottom plate
Fastening screws
ST4X16-B
Water absorption
cushion
Water inlet hose (1 piece)
Water inlet hose joint (1 piece)
the end connecting to the washing machine
jointer connecting the water
inlet hose and the water faucet
the end connecting to the water
inlet hose jointer
Lint filter (1 piece)
The ventilation
holes at the bottom
Before Using
Before Using
Safety precautions
In case the washing machine is installed on ground with
carpet, do not block the ventilation hole with carpet.
Do not use water hotter than 50 C .
Do not bend, stretch, twist, bind the power cord by force, or reformit.
Do not press or clamp it with heavy items. If the power cord and power
plug are bad, or the receptacle is loose, be sure to have it replaced by
the technicians of our special shop or our agent,or the after-sales service
department to avoid any risk.Keep the prong of the power plug clean.If
dust is found on the power plug, please wipe it off with dry cloth.
In normal usage of the washing machine, the power
plug shall be ready to be pulled or plugged with hand.
Be sure to pull the plug off and close the water faucet
when occurring power failure,delivering the machine,
setting the machine idle or cleaning the machine,Do
not plug or pull the power plug with wet hand.
earth
Please plug the plug on special 220-240V AC receptacle.
Be sure to use three phase power receptacle.Ensure
the earthing prong of the power receptacle is earthÂed reliably.Use leakage protector if possible.
Do not put the machine at damp place like
the bathroom. Never wash it with water.
Do not wash water-proof laundry like the raincoat,
bikecovers, down textiles etc. To avoid abnormal
vibrations in spinning and damages to the laundries.
Do not let the machine share one receptacle with other
electric appliances. If the power plug is damaged, or
the plugging into the receptacle is loose, do not use
the plug any more.
Before Using
Before Using
Safety precautions
Do not put hand into the rotating tub.It is dangerous
even if the rotation speed is slow. Take special care of
the children. Keep children away from the washing
machine to avoid them climbing on.
Do not decompose, repair or alter the machine by
yourself.
Do not put any hot or heavy items (such as the
kettle with hot water) on the washing machine.
Do not wash laundry with volatile materials
(such as thinner, petrol etc.).
Keep the machine away from direct sunlight and
heat source like the heater.
The handicapped or children without care shall not
use the machine.
Please keep the lint filter in good condition, and
install it to proper position during washing. If the
lint filter is lost or damaged,please contact the local
after-sales service department of our company.
Benzene
Before Using
Before Using
Safety precautions
To protect your laundries and washing machine,
please take out all of the coins, buttons, sand, hairpin
and other foreign materials before washing.
Please check if the water faucet is open, and if the
connection of the water inlet pipe is proper.
It is suggested to use foamless washing powder.
Dismantle
Install
Install the bottom plate
Install the lint filter
Adjust the Installation position
Screw
Back
Front
bottom plate
Soft object
Please install and adjust the machine according to the requirement of the mannual.
It is very important to your security and correct operating the machine.
Before Using
Before Using
Installation and adjustment
After open the package, please lean the
washing machine gently down to soft
items (towel cloth, blanket, etc.). Install the
bottom plate to the bottom of the machine
with the eight screws by a cross
screwdriver, then lift the machine up gently.
See to the figure.
The washing machine away from wall should be overrun 20mm.The largest allowable slope of the shank base of
the machine is 2 .The slanting or rough ground will result in unstable running or stoppage of the machine.
Please adjust it with following methods:
Confirm it's horizontal:
Hang the lead line to check if it is
horizontal.
Adjust the adjustable foot:
FastenLoosen
High
Low
the adjustable nut
the adjustable foot
1 .To twist the adjustable leg, please first lift up the
side of the foot slightly, loosen the adjustable nut,
and twist the foot.
2 . After adjustment, fasten the nut.
Install the lint filter in the balance ring.
(See to the right figure)
Install
The drainage shall be smooth with the drain hose.
The height of the drain hose shall be less than 10cm,
or the drainage will not be smooth, and cost such long
time that the machine may stop at mid way.
Do not step on or press the drain hose.
If extra drain hose is needed, please make separate
purchase. The inner diameter of the extra hose shall
not less than 30mm, and the length shall not exceed 1.5m.
If the extra hose is too long,
cut it either at A or at B point.
A
B
<10cm
A
> 30mm
<1.5m
How to change the direction of the drain hose
Back
Front
The bottom plate
Soft object
Figure 1
Page 3
If the drain hose is too long, cut it at mid point. To make
smooth drainage, cut the front end of the hose slantingly.
Use this side groove after
change the direction.
Fix the drain hose
onto the groove.
Useage the drain hose
Before Using
Before Using
2.Pull out the drain hose from the right side groove.
3.Extend the drain hose out from the left side
4.Install the bottom plate (method as stated in P3).
Lift up the machine gently.
1.Disassemble the bottom plate.
Lean the machine down gently with the front
surface facing the ground. Loosen the eight
screws by a cross screwdriver.
Loading...