Haier SIG100-97 User Manual

Automatic Washing Machine

SIG100-97

Please check if the power receptacle is earthed

reliably before usage to guarantee your safety.

Please read this manual carefully before use.

The manufacturer is not responsible for any
risks occurred owing to disobey these
stipulations.

Please retain it attentively for future reference.

Contents

Names of parts 1
Safety precautions 2
Installation and adjustment 4
Preparation before washing 6
Put in the laundries 7
Usage of the detergent 7
Usage of the operation buttons 8
Close the top lid 14
Finish washing 14
After the washing 15
Trouble shooting answer to question 16
Packing list 17
Specification the back cover

Top lid

Control panel

Names of the parts

Softener injection inlet

Door switch

Bleach injection inlet

Inner tub

Agitator

Cabinet

Control panel seat

Accessories

Water inlet hose
(2)

Outer drain hose component

(1)

Drain hose hook
(1)

Drain hose clamp

(1)

Cold water inlet valve

Hot water inlet valve

Water absorption cushion

Power line

Drain hose joint

Adjustable feet
(4)

Meaning and description of the symbols

Contents marked with that symbol

Warning sign

Forbidding sign

are related to the safety of the
product and the personal safety
of the users. Please operate in
strict conformity to the contents,
otherwise it may cause damage
of the machine or injure the
personal safety of the user.

Contents marked with that symbol
are actions forbidden to perform.
Performing of those actions may
result in damage of the machine
or injure the personal safety of
the user.

Please understand the shapes of the washing machine and accessories may be different
from the sketch figures in this manual due to product improvement.

1

Safety precautions

Please insert the power cord into special three

-phase receptacle.The earthing terminal of the
receptacle must be earthed reliably.If possible ,
please adopt electric leakage protector.

Earth

Do not bend ,extend,twist,bind by force.Do not press or nip it with weight.
Keep the pin of the power plug clean,if the power plug is polluted with dust,please wipe
with dry cloth carefully.
If the power cord or the power plug is bad, to avoid risk it is required to have it replaced
by the technicians of our special shop or the after-sale service department.

The power cord plug should be convenient
to be pluged in or pluged out with hand
while the washing machine runs normally.
Be sure to pull the plug out and close the
water tap when the machine is idle,when
moving the machine,or when cleaning
the machine.Do not use wet hand to ins­ert or pull out the power plug.

Do not put the machine at damp place like the bath
room. Never wash it with water.Not put wet laundries
on the control panel.

In case the washing machine is installed on ground
with carpet, be careful not to block the ventilation hole
with carpet.

Do not let the machine share one receptacle
with other electric appliances. If the power
plug is damaged, or the plugging into the
receptacle is loose, do not use the plug any
more.

Do not use water hotter than 60

Do not wash water-proof laundries like
the raincoat, bike covers etc. to avoid
abnormal vibrations in spinning.

2

Safety precautions

Do not stretch hands into the working
machine. It is dangerous even if the
rotation is slow. Take special care of
the children.

Do not put any hot or heavy items (such
as the kettle with hot water ) on the
washing machine.

The handicapped or children without
care shall not use the machine.

Do not decompose, repair or alter the
machine by yourself.

Do not wash laundries with volatile
materials (such as thinner, petrol etc.)

Petrol

nner

Thi

Keep the machine away from direct
sunlight and heat source like the heater.

To prevent your laundries and washing
machine from damage,be sure to take
out all of the foreign materials from your
pocket,such as coins,buttons,sand or
hair pins etc.

Before washing,please check if the water
tap is open ,and if the water inlet pipe is
connected properly.

It is suggested to use low-foaming was­hing powder

3

Installation and adjustment

Adjust the installation position

The largest allowed slope of the base of the machine is 2 . The slanting or rough
ground will result in unstable running or stoppage of the machine. Please adjust
it with following methods:

Confirm it's horizontal:

Hang the lead line to confirm
if it is horizontal.

Adjust the adjustable foot:

To twist the adjustable foot, please first lift up
the side of the foot slightly, and twist the foot.
.

Adjustable foot

Install the drain hose

Put the drain hose clamp on the outer
drain hose, insert the outer drain hose
into the joint, and then clutch tightly
with drain hose clamp.

Usage of the drain hose

The drainage shall be smooth with the drain hose.

1.put the drain hose up to suitable position.

2.Do not step on or press the drain hose.

High

Low

Drain hose

Drain hose clamp

Drain hose joint

1.0m-1.5m

4