Product appearance, color or patterns shall refer to the actual machine.
This manual uses recycling paper.
1
1
8-13
13-14
Use methed
Phenomenon
Please check
How to solve
No water output
Unstable quantity and
temperature with water output
Indication E1
Water exiting is cold
No temperature rising
Is water supply failed or water pressure too low?
Is water exit blocked?Is hot water valve opened?
Indication E3
Large amount of water
flows out of safety valve
Indication E4
Indication E5
Is water temperature adjusted?
Is temperature controller loss of control?
Sunshine unsufficient
Is Heating element idamaged?
Is the tap water pressure stable?
Unable to turn on
Whether components and parts are damaged
Circuit malfunction
Is the sensor of collector damaged?
Is it connected well with power supply board?
Is the sensor of storing tank damaged?
Is it connected well with power supply board?
Whether the circuit is frozen to jam or whether it leaks
Whether tap water pressure is too large ( over 0.7MPa
Check
Check and clean
Readjust
Contact repair section
Heat continually
Contact repair section
Check
Contact repair section
Contact repair section
Contact repair section
Contact repair section
Contact repair section
Contact repair section
Notes for usage
FAQ
15
Content
FeaturesFeatures
Electric circuit diagram Electric circuit diagram
Technical dataTechnical data
System structure
Technical parameterTechnical parameter
Before usage
Packing list
Particular warning
Attentions in installment
Installation
Introduction of indication board
Notes for usage
FAQ
Note
Installation guideInstallation guide
Use guideUse guide