Digital LED LCD Television Instruction Manual P.01
01 Safety Warningss
P.02 Digital LED LCD Television Instruction Manual
WELCOME
Thanks for buying this 19"/22" HD Ready Digital LED LCD TV. This guide will help you set up and begin using your TV.
First, check the contents of your box with the parts checklist below:
19"/22" HD Ready Digital LED LCD TV•
Remote control•
AAA battery •×2
Instruction Manual•
Warranty•
TV stand •
Now you can get started!
IMPORTANT INFORMATION
READ ALL INSTRUCTIONS BEFORE USE AND KEEP FOR FUTURE REFERENCE.
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).NO USER SERVICEABLE PARTS INSIDE.
FOR ANY PROBLEMS, REFER SERVICING TO THE CUSTOMER HELP LINE. THERE IS A LIGHTNING ARROW SYMBOL IN
THE TRIANGLE: THIS SYMBOL INDICATES HIGH VOLTAGE IS PRESENT INSIDE. IT IS DANGEROUS TO MAKE ANY KIND OF
CONTACT WITH ANYINSIDE PART OF THIS PRODUCT.
THERE IS A EXCLAMATION MARK IN THE TRIANGLE: THIS SYMBOL ALERTS YOU THAT IMPORTANT LITERATURE
CONCERNING OPERATION AND MAINTENANCE HAS BEEN INCLUDED WITH THIS PRODUCT.
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK AND FIRE, DO NOT PUT THE TV SET NEAR
SOURCES OF HUMIDITY. DO NOT USE ANY ABRASIVE CLEANERS WHICH MAY SCRATCH OR DAMAGE
THE LCD SCREEN. AVOID CONTACT WITH OBJECTS THAT MAY SCRATCH THE LCD SCREEN.
NOTE: SERVICING THE UNIT YOURSELF IS UNAUTHORISED AND COULD LEAD TO INJURY OR PRODUCT
DAMAGE. REFER ALL SERVICING TO THE CUSTOMER HELPLINE.
Digital LED LCD Television Instruction Manual P.03
01 Saftety Warnings
SAFETY NOTICE
For your protection,please read these instruction completely and keep this manual for future reference. ❏
Please ensure that the set has adequate ventilation. ❏
Do not place the set near a heat source or in direct sunlight. ❏
Do not put the unit near water or oil as it may cause a re. ❏
During thunderstorms, unplug both the antenna and power plug to prevent damage. ❏
Do not use a damaged power plug or put the power supply near a heat source as it may cause electric shock or ❏
re.
To prevent potential re, do not overload an electrical outlet with too many plugs. ❏
Place the set on a level surface to prevent it from tipping and potential damage. ❏
Do not remove the cover of the set or try to service your TV. This may result in electrical shock or re. All service ❏
work must be completed by an authorised technician.
If there are any abnormal sounds or smells from the unit, unplug it immediately and contact an authorised ❏
service provider.
To prevent re, do not use or store any ammable materials near the unit. ❏
To prevent re, do not place the unit near a damp wall. ❏
To prevent electric shock, ensure that any external antenna connected to the set is clear of contact with any ❏
power lines.
Do not plug/unplug the unit while your hands are wet. This may cause an electric shock. ❏
Please ensure a solid connection with the AC wall socket in order to avoid shock and potential re. ❏
To prevent electric shock or re, please prevent rain from entering the set along the wire connected to the outside ❏
antenna.
When cleaning, please unplug the unit. Use a soft cotton cloth. Do not use any abrasive cleansers, and prevent ❏
water from entering the set.
If any plugs or input wires are dirty, unplug the set and clean them. This will prevent the risk of electric shock or ❏
re.
If the set is not going to be used for an extended period, unplug the unit from the main power. ❏
The apparatus should not be exposed to dripping or splashing and no objects lled with liquids, such as vases should
be placed on the apparatus.
The mains plug is used for disconnecting the device, make it easily accessible.
Do not use any accessories that are not recommended by the manufacture.
P.04 Digital LED LCD Television Instruction Manual
WASTE ELECTRICAL PRODUCTS SHOULD NOT BE DISPOSED OF WITH
HOUSEHOLD WASTE. PLEASE RECYCLE WHERE FACILITIES EXIST. CHECK
WITH YOUR LOCAL AUTHORITY FOR RECYCLING ADVICE.
TruSurround XT, SRS and the symbol are trademarks of SRS Labs, Inc. TruSurround XT technology is
incorporated under license from SRS Labs, Inc.
TruSurround XT® creates a truly immersive surround sound experience with rich bass and clear dialog from only
two speakers.
02 About your LED LCD TVs
Digital LED LCD Television Instruction Manual P.05
02 About your LED LCD
6
7
1
2
4
3
5
GET TO KNOW YOUR TV
Front control panel
1
2
3
SOURCE
MENU
VOL+
VOL-
Call the input Source menu/Conrm button
when operating menu.
Press to select the main menu.
Volume up/Right orientation to adjust the item
in the OSD.
Volume down/Left orientation to adjust the item
in the OSD.
CH+
4
CHPOWER
5
Power indicator
6
Remote Sensor
7
TV channel down/to select the next channel.
TV channel up/to select the last channel.
P.06 Digital LED LCD Television Instruction Manual
Back panel
DC IN
USB
DIGITALVOUT
(COAXIAL)
HDMI IN
COM PONEN T
IN
AV IN
Y Pb Pr
VIDEO L-AUDIO-R
L-AUDIO-R
PC/DVI AUDIO IN
PC IN
SCA RT
1
23
4
5
6
7
8
9
10
11
DC INinput
1
EARPHONE
2
USB
3
Digital outputinput
4
HDMI IN
5
PC INinput
6
output
input
input
PC/DVI AUDIO IN
7
SCARTinput
8
AUDIO IN
9
AV INinput
>
COMPONENT IN
A
input
input
input
Digital LED LCD Television Instruction Manual P
02 About your LED LCD
GET TO KNOW YOUR REMOTE CONTROL
When using the remote control, aim it towards the remote sensor on the TV.
Stand By
1
DVD Menu / REC
2
DVD open / close
3
Picture Mode
4
Sound Mode
5
Call Screen Display
6
Sleep button
7
DTV Audio / NICAM / DVD Audio
8
Aspect Ratio Control button
9
Channel list button
0
Subtitle button
A
Program Number Channel selection
B
Source Exchange
C
Q.VIEW / Swap Channel
D
V+/V-: Volume selection
E
P+/P-: Channel selection
F
Mute
G
Menu button
H
GUIDE button (only for DTV)
I
Favourite list button (only for DTV)
J
OK button
K
Cursor Mover button
L
Back button (only for USB)
M
Exit Screen Display
N
REPEAT (only for DVD & USB)/CANCEL button
O
Zoom (only for USB)/Teletext index (only for TV) / REC index
P
Play / Pause button (only for DVD & USB) / Timeshift
Q
Stop (only for DVD, USB, REC & Timeshift)
R
Fast Reverse (only for DVD, USB, REC & Timeshift)
S
Fast Forward (only for DVD, USB, REC & Timeshift)
T
Previous (only for DVD ,USB & REC )
U
Next (only for DVD ,USB & REC )
V
DVD Set up / Text
W
DVD Title / Teletext Mix
X
DVD Search / Teletext Subcode
Y
DVD 10+ / Teletext Hold
Z
DVD Program / Teletext Reveal
[
DVD A-B Repeat / Teletext Size
\
DVD Call / Teletext Mode
]
DVD Angle/Teletext Time
Note
RED button, GREEN button, ❏ BLUE button and YELLOW
button are fast text button in analog signal. Function
button in DVBT (just reference the OSD)
Maybe some buttons of the remote control do not work ❏
,for they are only used for the model with DVD .
`
P.08 Digital LED LCD Television Instruction Manual
CONNECTING YOUR
DVD
TV
ANTENNA CONNECTION
Connect your aerial to the back of the TV into the
ANTENNA IN socket.
IMPROVE YOUR SIGNAL
To improve picture quality in a poor signal area, use a
signal amplifier (not supplied).
CONNECT YOUR PC TO THE TV
You can use your TV as a monitor for your personal
computer by connecting it with a VGA cable (not
supplied).
Read your computer user guide and check it has a
A
VGA connector.
Turn the power o on your TV and PC.
B
Turn on the DVD player and insert a DVD.A
Press the button to select .B
Refer to the DVD player user guide for operating C
instructions.
CONNECT A DVD PLAYER OR VCR TO
YOUR TV
This is the way for connectting a DVD player or VCR to
your TV. Make sure that both the TV and DVD player or
VCR are switched o before you connect them.
Connect the AV DVD/VCR outputs to the AV IN
A
socket on your TV.
Press the
BSOURCE button on the TV to set the video
input mode to AV.
Connect a D type 15-pin VGA interface cable to C
the VGA video interface connector on the PC.
Connect the other end of the cable to the PC
interface connector on the TV. Tighten the screws
on the VGA connectors and connect the audio
cable (not supplied) to the audio input socket on
the back of the TV.
Turn on the power of the TV firstly and then the
D
PC.
Press the button on the TV or TV remote control to
E
set the video input mode to VGA.
Once the image shows, if there is noise present,
F
change the VGA mode to another resolution,
change the refresh rate to another rate or adjust
the brightness and contrast on the menu until the
picture is clear.
CONNECT A DVD PLAYER TO YOUR
TV
Connect the DVD video outputs (Y, Pb, Pr) to the
COMPONENT (Y, P
b, Pr) IN socket on your TV.
SCART INPUT
Connect the scart lead from the external device A
(DVD player, Set-top box or games console) to the
TV scart socket.
Press the
BSOURCE button to select SCART mode.
Press the
C PLAY button on the external device.
HDMI input
Connect the cable from the HDMI device to the TV A
HDMI socket.
Press the
B SOURCE button to select HDMI mode.
Refer to the HDMI device user guide for how to
C
operate.
Digital LED LCD Television Instruction Manual P.09
03 Getting Started
Prepartion of your
remote control
03
GettingStarted
Battery installation
Place the remote control face down, then open the A
cover of the battery compartment.
Install two AAA batteries. (The + and - symbol of B
the battery must match with the marks on the
remote).
Close the cover of the battery compartment.C
Setting up
Location
You will need to place your TV near your plug socket (so the
power cable can comfortably reach) and within reach of your
aerial socket or extension lead.
Connection
Insert your TV aerial lead into the Antenna input at the A
side of the TV.
Insert the batteries into the remote control. Make sure
B
they are inserted the right way around, matching the
polarity as indicated inside the battery compartment.
Switching your TV on
Press the APOWER button on the right side of the TV
once. A red ashing light will appear in the corner of the
screen.
Press
BPOWER on the remote control. The TV will turn
on and the red light will turn blue. This may take a few
moments.
Battery caution
Confirm there is no object between the remote control
and the remote sensor of the TV set.
Sunshine or other strong light will interfere with the
signal sent by the remote control. In this situation turn
the TV set to avoid the direct light source.
Do not put the remote control in direct heat or in a
damp place as you may damage the remote.
Please use two AAA 1.5V batteries. Do not mix battery
types. Install the batteries at the correct polarities.
Do not use rechargeable batteries. If your TV is to be
stored for a period of time, remove the batteries from
the remote control.
Select your chosen language when prompted from the
C
list that will appear on screen. Use the34 button to
scroll to the language you want and press OK button to
confirm.
TUNING YOUR TV
Switching to an external source other
that TV
If you have attached a DVD player or similar external device
to the TV, you will need to tell the TV to display the content
from it. Simply press SOURCE which will bring up the source
P.10 Digital LED LCD Television Instruction Manual
menu in the right corner of the screen, use the 5 and
Source
TV
DTV
AV
SCART
Component
PC
HDMI
USB
Menu
Tuning
Select
Exit
MENU
Current CH 9
Country United Kingdom
Coulor System PAL
Sound System DK
Auto Search
Manual Search
Skip Off
Menu
Tuning
Select
Exit
MENU
Current CH 9
Country United Kingdom
Coulor System PAL
Sound System DK
Auto Search
Manual Search
Skip Off
button to highlight the required source and press OK
select.
For details of how to plug in other equipment see Get to
konw your TV on page 5.
B5 button to select Tuning menu, press 4
Press
button to enter.
Press
C5 button to select Manual Search,then
press 4 button to start searching.
Press
DMENU button to stop Manual Search during
searching.
Auto search
Current CH ❖
Press 34 button to select the channel number to
Press AMENU button.
edit.
Colour System ❖
Press 5button to select “Colour System”, then
press 34 button to select the correct colour system.
Sound System ❖
Press 5button to select “Sound System”, then
press 34 button to select the correct sound system.
Skip ❖
To skip the channel when press P+/P- button by
setting the Skip button On.
B5 button to select Tuning menu, press 4
Press
button to enter.
Press
C5 button to select Country item.
Press 34 button to select you needed.
Press
D5 button to select Auto Search item, press
4button to start searching.
Press
EMENU button to stop auto search during
searching.
Note
Fine tune ❖
If the picture and/or sound are poor, try using the
FINE TUNE feature. Do not use this feature unless
reception is poor.
Repeat above steps 1-3 ,then press
A5button to
select the Fine Tune item.
Press
B34 button repeatedly to carry out fine tune,
till the best picture and sound are obtained, then
loosen the button.
It may take a few moments to complete the Auto ❏
Search.
COMMON INTERFACE
Manual search
Press AMENU button.
The common interface (CI) slot is designed to accept the
Conditional Access (CA) Module and Smart card in order
to view the pay TV programmes and additional services.
Contact your Common Interface service provider to get
more information about the modules and subscription.
Please noted that CA modules and smart cards are
neither supplied nor optional accessories from us.
Digital LED LCD Television Instruction Manual P.11
03 Getting Started
Warning
CI Slot
CAM
Smart Card
CI Module Inserted
Message
CI Module is OK
Message
Menu
Tuning
Select
Exit
MENU
Channel Management
Country United Kingdom
Auto Search
Manual Search
Time
Option
Version 1.6.0826
Menu
Option
Select
Exit
MENU
Audio Language
Subtitle Language Off
CI Information
Parental Lock
Parental Rating
Software Upgrade Off
Guide
English
CI Module Removed
Message
Menu
Tuning
Select
Exit
MENU
Channel Management
Country United Kingdom
Auto Search
Manual Search
Time
Option
Version 1.6.0826
Menu
Option
Select
Exit
MENU
Audio Language
Subtitle Language Off
CI Information
Parental Lock
Parental Rating
Software Upgrade Off
Guide
English
Switch o your TV before any module is inserted in •
the Common Interface slot.
Insert the CAM correctly, then Smart Card to the CI
A
slot that is located at the side of the TV.
Turn on the TV and it will display the below message B
if the CA module is detected. Wait for few moments
until the card is activated.
When module is removed, the following message H
will appear on the screen.
Software Update function
When you get the updating news from the TV shop’s •
web, you can update the operating software using
the Download menu. The data for various units are
transferred consecutively on a special receiving
channel.
You need to search the channel with updating code •
stream.
Note
You can get information from the TV shop or ❏
internet.
Operation
Press the
CMENU button then press 5 button to
select TUNING menu, press 4 button to enter
Press
D5 button to select Option item, press 4
Press AMENU button.
button to enter.
Press
E5 button to select CI Information option.
Detailed information on the CI card in use is
F
displayed.
Press
GOK button to access the card menu. Refer to
the module instruction manual for setting details.
B5 button to select TUNING menu, press 4
Press
button to enter.
Press
C5 button to select Option item, press 4
P.12 Digital LED LCD Television Instruction Manual
button to enter.
Menu
Picture
Contrast
Brightness
Colour
Sharpness
Tint
Picture Mode Standard
Colour Te mp Standard
50
50
50
50
50
Select
Exit
MENU
Start system upgrade
Do you want to upgrade your TV?
Don t turn off your TV or touch any button!
YES NO
,
Updating
Download-Don t turn off the TV!
It will take several minutes.
Please wait...
50%
Upgrade finished
Please turn off theTV!
Upgrade finished
Press
D5 button to select Software Upgrade
option.
Press
E34 button to set it as On. (The default is
O)
If the upgrade information is received, the TV will
F
begin to upgrade.
Load the receiver identification. This process may
G
also take several minutes. You can press EXIT
button to cancel the download .
After the download has finished, please restart
H
the TV.
Press V+/V- button on the remote control or the side of
the TV to adjust the volume level.
ADJUSTING PICTURE
SETTINGS
Changing the Picture Setting
Press AMENU button.
Press
B5 button to select Picture menu, press 4
button to enter.
Press
C5 button to select the item requires
adjusting.
Press
D34 button to adjust the selection item.
USING YOUR TV
How to select the TV program
Using Program number button Enter the channel A
number with the number keypad on the remote
control.
Using
BP+/P- button.
Press the P+/P- button to select a channel
number.
How to adjust volume
When you are satisfied with your choice, press the
E
EXIT button to return to normal viewing or press
MENU button to return to the previous menu.
Contrast ❖
This will adjust the intensity of bright parts in the
picture but keep the dark parts unchanged.
Brightness ❖
This will adjust the light output of the complete
picture, which will mainly aect the darker areas of
the picture.
Colour ❖
This will adjust the saturation level of the colours to
suit your personal preference.
Sharpness ❖
This will adjust the sharpness of fine details in the
picture.
Tint ❖
Allows you to select the colour mix (Tint) of the
picture.
Digital LED LCD Television Instruction Manual P.13
03 Getting Started
Note
Menu
Sound
0
Select
Exit
MENU
Balance
Sound Mode Standard
AV L Off
SRS TS XT Off
Equalizer
Menu
FUCTION
Select
Exit
MENU
Language English
Text L West
Display Mode Wide
Blue Screen On
Osd Time Out 15 Secs
Sleep
anguage
Reset
Off
The Tint function is only available in NTSC mode. ❏
Picture Mode ❖
This will select the picture mode. Select Standard/
Mild/User/Vivid according to the program. You can
quickly select the desired mode by P.MODE button on
the remote control.
Colour temp ❖
This will increase or decrease Warm (red) and Cool
(blue) colours to suit personal preferences.
Select Cool to give the white colour a blue tint,
Standard to give the white colour a neutral tint,
Warm to give the white colour a red tint.
the desired mode by S.MODE button on the remote
control.
AVL ❖(Automatic volume control)
This will reduces the dierences in volume level
among broadcasters.
SRS TS XT ❖
This will control the Woofer output.
Press 5 button to select SRS TS XT.
Press 34 button to set SRS TS XT as OFF, ON.
Equalizer ❖
This sound setting can be adjusted to suit your
personal preference.
ADJUSTING SOUND
SETTINGS
Changing the Sound Setting
Press AMENU button.
Press
B5 button to select Sound menu, press 4
button to enter.
Press
C5 button to select the item requires
adjusting.
Press
D34 button to adjust the selection item.
When you are satisfied with your choice, press the
E
EXIT button to return to normal viewing or press
MENU button to return to the previous menu.
FUNCTION SETTINGS
Press AMENU button.
Press
B
E
5
button to select Function menu, press 4
button to enter.
Press C5 button to select the item requires adjusting.
PressD34 button to adjust the selection item.
When you are satisfied with your choice, press the
EXIT button to return to normal viewing or press
MENU button to return to the previous menu.
Language ❖
To set the OSD language, press34 button to
select English/Italiano/Espanol/Francais/ Deutsch/
Nederlands.
Balance ❖
This will adjust the output of the right and left
speakers to obtain the best stereo reproduction for
your listening position.
Sound Mode ❖
This will select the sound mode.
Press 34 button to select Standard/Music/Theater/
User according to the program. You can quickly select
Text Language ❖
To set the Text language, press34 button to select
West/East/Russian/Arabic/ Farsi .
Display Mode ❖
To set the picture proportion, press34 button to
select 4:3/16:9/Auto/Wide/Zoom1/Zoom2. You can
quickly select the desired mode by SCREEN button on
P.14 Digital LED LCD Television Instruction Manual
Choose 4:3 when you want to view a picture
with an original 4:3 aspect ratio, with gray bars
appearing at both the left and right sides.
16:9 mode •
Choose 16:9 when you want to adjust the picture
horizontally, in a linear proportion to fill the entire
screen.
Wide •
Choose Wide when you want to adjust the picture
in a non-linear proportion, that is, more enlarged
at top sides and no alteration at bottom side.
Zoom1 •
Choose Zoom1 when you want to view the picture
without any alteration. However, the top and
bottom portions of the picture will be cropped.
Zoom2 •
Choose Zoom2 when you want the picture to be
altered, both vertically extended and cropped.
The picture taking a halfway trade o between
alteration and screen coverage.
Note
The HDMI Overscan function is only available ❏
for HDMI mode.
Channel management
Press AMENU button.
B5 button to select Tuning menu, press
Press
4 button to enter.
Press
C5 button to select the Channel
management item , and press 4 to enter.
Blue Screen ❖
This will select the character background colour.
Note
The Blue Screen function is only available for ❏
ATV mode.
OSD Time Out ❖
To set how long you want the menus to appear
on-screen. Each press of 34 button repeatedly to
select the number of preset minutes, the Time will
be set in sequence: 5secs, 10secs, 15secs, 20secs,
25secs,30secs.
Sleep ❖
To set how long you want to turn o the TV after a
preset time (from 5 to 240 minutes).
Lock ❖
To control the turner , program,source volume and so
on , please refer to the page 15 for detail.
Reset ❖
To recover to the default value.
HDMI Scan Info ❖
To set the HDMI Scan Info as oversacn or underscan.
When you are satisfied with your choice, press the
D
EXIT button to return to normal viewing or press
MENU button to return to the previous menu.
Channel Edit ❖
Press 4 button to enter the Channel Edit item,then
press 5 button to choose the channel you want to
edit.You can press red,green,yellow or blue button to
set the option you need.
Digital LED LCD Television Instruction Manual P.15
03 Getting Started
Channel Sorting ❖
Menu
Tuning
Select
Exit
MENU
Channel Management
Country United Kingdom
Auto Search
Manual Search
Time
Option
Version 1.6.0826
Time
Auto
Manual
Timer Mode Manual
Date 09/06/2008
Clock 15:47
Time Zone Auto
Summer Time OFF
Press 4 button to enter the Channel Sorting item,then
press 5 button to choose the way to order the
channels .
Channel Grouping ❖
Press 4 button to enter the Channel Grouping
item,then press 5 button to choose the channel
you want to grouping.You can press digit button to
grouping the channels.
Press
DMENU button to save and exit.
Note
The Time function is only available for DTV ❏
mode.
LOCK MENU
SETTINGS
Using this function can control the tuner, program,
source volume and so on.
Press
AMENU button.
Press
B
5
button to select Function menu, press
4 button to enter.
Delete All Channel ❖
Press 5 button to choose the item to delete all
channels.
Note
The Channel Managment function is only ❏
available for DTV mode.
TIME SETTINGS
Press AMENU button.
B5 button to select Tuning menu, press
Press
4 button to enter.
Press
C5 button to select the Time item you
want to set, and press 34 or digit button to set
the time mode you need.
Press C5 button to select the
Lock menu
.
PressD4 button to enter and you will be required
to enter the password. The initial password of the
television is 0000. If you forget your password,
you can always input 9443 to regain control.
Change Password ❖
Press A5 button to select Change Password
item. Press 4 button to enter the submenu.
When you have inputted the four digits you will
B
be prompted to enter it again.
Your new password will then be automatically
P.16 Digital LED LCD Television Instruction Manual
saved.
Menu
Function
Select
Exit
MENU
Max Volume 100
Initial Volume Off
Clear Lock
Menu
Tuning
Select
Exit
MENU
Channel Management
Country United Kingdom
Auto Search
Manual Search
Time
Option
Version 1.6.0826
Menu
Option
Select
Exit
MENU
Audio Language
Subtitle Language Off
CI Information
Parental Lock
Parental Rating
Software Upgrade Off
Guide
English
System Setup
OFF
4
5
6
7
8
9
Parental Rating OFF
Move
Select
Enter Old Password
Enter New Password
Confirm New Password
Parental Lock
Child Lock ❖
Press 5 button to select Child Lock.
Press 34 button to set On or O mode. If lock on
mode is set, Child Lock is in activated automatically.
In such case, if Child Lock button (button on the
television) is pressed, the screen will display Child Lock. The Child Lock mode can be resumed by
entering Lock Set menu, set Child Lock On or O.
Tuning Lock ❖
Press 5 to select Tuner Lock and 34 to set On/
O. (To set On, some operation such as search will
be not available. When enter the Tuning menu, Tuner
Lock will be on the screen. If you want to operate
Tuning menu, you need to enter the Lock menu to set
Tuner Lock O or operate unlock.)
Source set ❖
Source set is opted for setting up start source.
Press 34 button to select O, TV, DTV,AV, SCART,
Component , PC, HDMI , USB in turn.
Channel NO. ❖
Channel NO. is opted for setting up preset channel.
Press 5 button to select preset Channel. Press 34
button to select channel number.
Initial Volume ❖
The TV will remember it after your setting, that will be
the volume when turn on the TV next time.
Clear Lock ❖
Press 5 button to select clear lock mode. Press
4 button to clear lock all set modes, setting all lock
options to o, and the maximum volume returns to
100.
Parental Lock ❖
Press AMENU button on the remote control.,then
press 5 button to select Tuning menu, press 4
button to enter the sub-menu.
Press
B5 button to select Option menu,then
press 4 button to enter.
Source Lock ❖
Source Lock will control the On or O of hinder
external input modes.
Press 34 button to set as on or o.
When the source lock is set as on, TV source will
display, at this time, when press SOURCE button,
the TV can switch to corresponding source and will
display the Source is locked.
Max Volume ❖
Press 5 button to select Max Volume. Press 34
button for adjustment between 0-100. If a certain
Value is set, when volume is being adjusted, the
sound value can not exceed maximum volume value.
If current volume is over Max Volume, when lock set
menu is set, current volume will become set maximum
volume, if current volume is below maximum volume,
customer set volume will stay unchanged.
CPress 5 button to select Parental Rating item,
you will be required to enter the password. The
initial password of the television is 0000.
D
If you want to change the password of Parental
Rating, Press 5 button to select Parental Lock
to set it
Digital LED LCD Television Instruction Manual P.17
03 Getting Started
SHORTCUT MENU
ON
English
Move
Subtitle language
Subtitle language
Channel list
Channel Frequency System Name Skip
1 49.75 DK CH-02 Off
2 62.25 BG CH-04
3 83.25
Off
BG CC-77 Off
4 144.25 DK CC-06 Off
5 152.25 DK CC-07 Off
6 184.25 DK CH-06 Off
7 220.25 I CH-11 Off
8 471.25 BG CH-21 Off
9 487.25 DK CH-23 Off
Swap InsertC opyDelete
Move
Enter/Edit
Channel List
Channel 5
Name CC-07
Sound System DK
Frequeny 152.25
Fine T une
Skip On
Channel list
Group None
0005 five
0015 Ch15
0016 QVC
0017 UK Gold
0023 bid-up.tv
Move
Daily Mode
Daily Weekly Info Remider/Recorder
S.No Channel name
0005 five
0015 Ch15
0016 QVC
0017 UK Gold
0023 bid-up.tv
0025 TCM
03/10/2004 15:07:09
03/10/2004 Wednesday
14:35-15:38 The Streets of San Francisco
14:35-15:38 The Streets of San Francisco
15:38-15:40 Five News Update
S.NO Channel
0005 five
0015 Ch15
0016 QVC
0017 UK Gold
0023 bid-up.tv
Move
Favourite LIST
DISPLAY
Subtitle Function ❖
Press ASUBTITLE button on the remote control,
the Subtitle languages menu will be displayed.
Press
B34 button to set the item ON or OFF, and
press OK button to enter. You can press the EXIT
button to cancel the changes at anytime.
Note
Press ❏SUBTITLE button on the remote, it will
display subtitle languages menu only in the
DTV mode.
CH.LIST Function ❖
Press CH.LIST button on the remote control the TV will
display Channel List menu.
In TV mode, press5 button to select the channel, and
then press OK button to enter,then you can edit the
characters of the channel .
GUIDE Function ❖
Press GUIDE button on the remote control, will
display Program Guide menu, press 534button
to select the program.
You can press the EXIT button to cancel the changes
at anytime.
Note
Av ❏ailable only in the DTV mode.
FAV Function ❖
Press FAV button on the remote control, will display
Favourite List menu.
Press 5 button to select program and press OK
button to enter. You can press the EXIT button to
cancel the changes at anytime.
In DTV mode, press5 button to select the channel,
and then press OK button to enter .
INFO ❖
Press INFO button on the remote control, it will
display the current channel information.
You can press the EXIT button to cancel the changes
at anytime.
P.18 Digital LED LCD Television Instruction Manual
0005 five 03/10 15 05
14 35-1538 The Streets of San Francis
15 38-1540 Five News Update
Singal 50%
Quality 81%
Sleep ❖
Stereo
English
English V. I.
Move
Audio Language
Audio Language
The sleep timer automatically shuts o the TV after a
preset time (from 5 to 240 minutes).
Press the
A Sleep button and then the "Sleep Left
Time" will be diaplayed on the screen.
Press the
BSleep button again,you can set the
Sleep time.
When you are satisfied with your choice, press
C
MENU button to return to the previous menu or
press the EXIT button to return to TV viewing.
And the time begins to count down from the
number of minutes selected.
AUDIO/I/II ❖
Press AUDIO button on the remote control, will
display Audio Languages menu.
Press 5 button to select the desired settings and
press OK button to enter.
You can press the EXIT button to cancel the changes
at anytime.
button again .
Quick program view ❖
This function enables quick swap to the last watched
program. Press Q.view button, and the TV will be back
to the TV source, expect in the USB and DVD source.
Suppose the channel number you used just now
A
is 8 and the channel number you are using is 18
(as shown in the figure).
If you want to return to the last watched program B
channel 8, you can simply press the Q.View button.
If you want to return to channel 18, press the C
button again. Use this function, you can easily
change between the channel you are using and
the channel you used last Time.
Note
Press ❏AUDIO button on the remote, it will
display Audio Languages menu only in the DTV
mode.
04 Using the
features
Eliminate Sound ❖
When you need to pay attention to surrounded
sounds, or there is a telephone calling you
or there are some guests visiting you, the sound
elimination (mute) function is very convenient.
A MUTE button on the remote control and
Press the
“Mute” type face will display on the lower part of
the screen. At this Time, the sound of the TV set is
turned o.
If you want to recover the sound, press the
B MUTE
Teletext functions
Teletext is an information system, broadcast by certain
channels, which can be read like a newspaper. It also
provides subtitles for people with hearing difficulties or
those who are unfamiliar with the language in which a
particular program is being broadcast (cable networks,
satellite channels, etc.).
Note
The ❏teletext buttons could be working even if
there is no teletext signal, but there is no teletext
display.
Digital LED LCD Television Instruction Manual P.19
04 Using the features
Teletext
Teletext functions ❖
To select “teletext” press the button on the
handset. To switch o teletext, press the button again.
“Note all menu functions are not available in teletext
mode”. Only a few direct button control functions are
available in teletext mode, they are:
Volume adjustment •
Mute function •
characters between Eastern and Western.
Hold ❖
Pressing the button will stop the teletext page
automa tically updating. This feature is very useful
where there are several teletext pages or data on
the same page number.
Page up/down ❖
Use the P+/P- buttons to browse next or previous
page.
Page number entering ❖
To select a Teletext page, enter the page number
using the numeric key pad on the remote control,
or use the P+ or P- buttons, or the coloured Fast text
buttons.
Mix mode ❖
To view the TV picture while in Text mode press the
button, this will superimpose the Teletext data on top
of the TV picture. Press this button again to return to
Full text.
INDEX ❖
Press the INDEX button to go to the index page of
teletext.
Size ❖
Pressing the button changes between full screen
top half bottom half full screen. This feature is
very useful as it magnifies the image making the
characters easier to read.
Reveal ❖
Pressing the button will reveal hidden text. This
feature is used to reveal information such as answers
to Teletext on-line interactive puzzles.
Time ❖
While in normal TV mode only, pressing the button
will display the teletext time in the top right hand
corner for a few seconds.
Fast text coloured❖buttons
Fast text automatically displays the four most
commonly used pages that the broadcaster thinks
that you may want to choose next. Press the same
coloured button on the remote control as the
coloured link at the bottom of the teletext page to
go directly to that page.
Language change ❖
Pressing the button will change the Teletext
Subcode ❖
Pressing the button by entering its 4-digit
number to enter a secondary page.
P.20 Digital LED LCD Television Instruction Manual
may be unsmooth.
Music
Move
Select
Move Music Photo
0001 C:
Photo
Move
Select
Move Music Photo
Recorder
Do you want to select background
music?
YES NO
Playing Pictures
USB MODE
Note
The diagrams in the following section are ❏
schematic and only for your reference. Please
see the actual product if necessary.
USB Devices
Connect the USB device to the USB IN jack on the side
of TV (or on the back of TV).
After entering USB main interface, press yellow A
button to select “PHOTO” item.
Press ”
BOK“ to confirm the selection and enter the
picture file list,and the TV will prompt us to set the
background music. You can set the background
music as you need.
Press
C“5/“ and “4 / 3“ to select the picture you
want to play, press ”OK“ to play the pictures.
If you want to pause the picture which is being
D
palyed, press the PALY/PAUSE button again.
Press ”ZOOM“ to magnify the picture. Press “PREV/NEXT“ to select the last or next picture.
Press “3/4“
To exit playing, just press “
EBACK” repeatedly.
and “5/“ to rotate the picture.
Note
Note
Due to the particularity of file cording, some ❏
The menu display varies with the photo name and ❏
pixel in your equipment.
files may be unable to read.
Supported equipment:
B
Support the equipment that supports Mass
Storage Protocol , such as some USB disks,
mobile harddisks. If USB equipment could not be
identified due to unsupported file system, please
format the equipment to the FAT32.
To achieve smooth playing, ensure the following:
C
Playing Music
After entering USB main interface, press green A
button to select “MUSIC”.
Press ”
BOK“ to confirm the selection and enter the
music file list.
The file code rate should be lower than •
300KB/S;
Due to the limitation of USB signal transmission •
distance, it is recommended not to use USB
patch cord, in case of using the cord, make sure
that its length is not over 1m;
Use high-speed USB equipment in conformity •
with USB2.0 full speed Interface Standard; If
USB equipment in conformity with USB1.1 full
speed Interface Standard is used, the playing
Press C“5/“ button to select the music you want to
play, then press “PLAY/PAUSE“ button to play the
Digital LED LCD Television Instruction Manual P.21
04 Using the features
music.
Movie
Move
Select
Move Music Photo
0001 C:
Timeshifting
Message
Do you want to stop TIMESHIFT?
YESOK
Timeshifting
Pause II
Recording
Recording
Message
Do you want to stop RECORDING?
YESOK
Press “
/“ to achieve the REV (fast back) and FWD
(fast forward) of the music being played.
Press “PREV/NEXT “ to select the last or next music.
To return to the main menu, just press “
DBACK”
repeatedly.
Note
You can enjoy the music and the picture at the ❏
same time.
Playing a Movie
Atter entering USB main interface, press A“3/4“ to
select “Movie”.
Press “
BOK” to confirm the selection and enter the
movie file list.
The device reports the unfaithful size. •
Time shift
Time Shift function is only available in DTV mode.
Press PLAY/PAUSE to prepare and then the TV begin
timeshifting. If you want to stop time shift function,
press the STOP button.
/“ to achieve the REV (fast back) and FWD
Press ❖“
(fast forward) of the time shift program.
Press “PLAY/PAUSE “ to pause timeshifting. ❖
Press C“5/“ button to select the movie you want to
play, and then press “PLAY/PAUSE” button to play
the movie.
You can stop the time shift program being played by ❖
pressing the STOP button.
Press “PREV/NEXT “ to select the last or next movie.
To exit playing, just press “
DBACK” repeatedly.
Recording
Press AD.MENU button to record the program being
Using External USB
played.
Disk For Recording
Insert the USB device with FAT32 format into the A
USB connector.
Waiting for the system checking. And you can see
B
the speed data after the success checking.
Note
The system can not work normally if the USB ❏
device have the listing problem below:
The device has bug. •
The device has error block. •
Press
BSTOP button to stop the program recording
being played.
P.22 Digital LED LCD Television Instruction Manual
Changing the channel will not inuence the ❏
recording in the same frequency, but will inuence
the time shift. When the recorded program is being
played, you can not delete it.
F
05 Reference
sections
Press 5 button to select the content you recorded.
Press the 4 button to display the program
information.
Press red button to cancel.
Press OK or PLAY/PAUSE button to play the
program recorded and press STOP button to stop it.
Press D5 button to select the Select Disk.
Press the 4 button to enter,then
press 5 button
to select the device .
Troubleshooting
To assist in location of possible faults use the
help guide below:
Verify if the television is
No picture, no
sound
Blank screen
No sound
Poor sound
properly plugged in.
Verify if the television has a
proper supplied power source.
Verify if electricity is available.
Verify if correct signals are
input.
Operate the remote to change
signal input to correct input.
Restart the television if power
supply is interrupted.
Press MUTE button and verify if
Mute mode is set.
Switch to other channel and
verify if the same problem
happens.
Press VOL+ button to see if the
problem can be solved.
Verify if sound system is correct.
Refer to user‘s manual for
adjustment.
Press
E5 button to select the Reminder.
Press the 4 button to enter , then set the
appointment of recording.
Note
No picture in
some channel
No color for
some channel
program
(black and
white)
Verify if correct channel is
selected.
Adjust the antenna.
Verify if the same problem exists
in other channels.
Check out of picture and sound
systems.
Refer to relative instructions
in the Manual for color
adjustment.
Digital LED LCD Television Instruction Manual P.23
05 Reference Sections
Verify if the antenna is correctly
Spots with
some or all
pictures
Television out
of control
Note
If the fault can not be repaired using the above ❏
guide consult with your local authorized service
centre.
The TV set must only be repaired by a qualified ❏
registered service person. Never attempt to
remove the back cover as the TV set has dangerous
voltages in side that may cause a fatally or fire.
connected.
Verify if the antenna is in good
condition.
Make fine adjustment of
channel.
Disconnect the television from
power supply and 10 seconds
later, connect the television
to the power supply. If the
problem still exists, contact
authorized after-sales service
for technical assistance.
Specification
User manual
Accessory
Remote control
Battery (×2)
* The part specifications of this TV set provided here
are for reference only.
Dierences may occur as product technology is
updated.
Design and specifications are subject to change
without notice.
Colour system
PAL, SECAM, NTSC (AV)
Sound system BG, DK, I, L,L'
Video input
DTV Y/P
b/Pr
SCART, YP
VGA, HDMI, USB
Composite: 480i/p, 576i,
720p, 1080i, 1080p
b/Pr, YCb/Cr, AV,
PowerSee rating plate
Power
consumption
Audio output≥2.5W+2.5W
See rating plate
Working temperature:
+5 °C - +35 °C
Working humidity:
Environment
conditions
20% - 80%
Storage temperature:
-15 °C - +45 °C
Storage humidity:
5% - 90%
0090509580C
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.