Haier LEC24B1380, LEC22B1380W, LEC19B1320, LEC22B1380 User Manual
TFT-LED LCD TV
LEC19B1320
LEC22B1380
LEC22B1380W
LEC24B1380
Contents
Safety and warnings.......................................................................................2-3
Introduction..................................................................................................4
Stand installation guide................................................................................. 5
Installation................................................................................................... 6-9
Remote Control............................................................................................10
Operation..................................................................................................... 11-15
Trouble Shooting...........................................................................................16
DVD Operation............................................................................................. 17-20
DVD Trouble Shooting...................................................................................21
Warranty.......................................................................................................22
-1-
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this near water.
Television
6) Clean only with dry cloth.
7) Do not block any ventilation openings, install
in accordance with the instructions.
8) Do not install near any heat sources such as
radiations, heat registers, stoves, or other
Television
(including amplifiers) that produce
heat.
9) Do not defeat the safety purpose of the
polarized plug. If the provided plug does not fit
into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protected the power cord from being walked
on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the .
Television
11) Only use attachments/accessories specified
by the manufacturer.
12) Unplug this during lighting
Television
storms or when unused for long periods of time.
13) Refer all servicing to qualified service
personnel. Servicing is required when the
Television
has been damaged in any way, such as;
power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the
Television Television
, the has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
14) Only use attachments/accessories specified
provided by the manufacturer, the product is
supplied by AC adapter, the AC adapter is used
as disconnect device, the disconnect device
shall remain readily operable.
15) The ventilation should not be impeded by
covering the ventilation openings with items,
such as newspapers, table-cloth, curtains, etc.
16) No naked flame sources, such as lighted
candles, should be placed on the .
Television
17) Attention should be drawn to the
environmental aspects of battery disposal.
18) The use of in moderate climate.
Television
SAFETY AND WARNINGS
WARNING:
To reduce the risk of fire or electric shock, do
not expose this to rain or moisture.
WARNING:
The batteries shall not be exposed to
excessive heat such as sunshine, fire or the
like.
WARNING:
Never place heavy or sharp objects on the
LCD panel or frame.
This marking indicates that this product should
not be disposed with other household wastes
throughout the EU. To prevent possible harm to
the environment or human health from
uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of
material resources. To return your used device,
please use the return and collection systems or
contact the retailer where the product was
purchased. They can take this product for
environmental safe recycling.
Haier is committed to safely recycling
electronic products and product materials.
Please check for a local recycling location in
the United States at: 1800RECYCLING.COM
or call 1.800.RECYCLING.
Television
-2-
SAFETY AND WARNINGS
High voltages are used in the operation of this television
receiver. Do not the cabinet.
Refer servicing to qualified service personnel.
To prevent fire or electrical shock hazard, do not expose
the television receiver to rain or moisture.
Do not drop or push objects into the television cabinet
slots or openings. Never spill any kind of liquid on the
television receiver.
Do not block the ventilation holes on the back cover .
Adequate ventilation is essential to prevent failure of
electrical components.
open
of the TV
Never stand on, lean on, or suddenly push the television or
its stand. You should pay special attention to children.
Serious injury may result if it falls.
Do not place your television on an unstable cart, stand,
shelf or table. Serious injury to an individual and damage
to the television may result if it falls.
When the television receiver is not used for an
extended period of time, it is advisable to disconnect
the AC power cord from the AC outlet.
Avoid exposing the television receiver to direct sunlight
and other sources of heat. Do not stand the television
receiver directly on other products which give off heat,
e.g. video cassette players and audio amplifiers. Do not
place naked flame sources, such as lighted candles on
the television.or near
/or
Do not trap the power supply cord under the television
receiver .s' stand
Dim:515*320mm(
If the television is to be built into a compartment or similar
enclosure, the minimum distances must be maintained. Heat
build-up can reduce the life of your television, and can also
be dangerous.
-3-
Main features
Accessories
Accessories
INTRODUCTION
Integrated ATSC TV tuner for HDTV broadcast reception
High brightness provides a vivid and brilliant picture
Deeper blacks and brighter whites with high contrast
Wide Screen aspect ratio (16:9) for a complete home
theater experience
HDMI input for true digital connection
VGA port for connection to PC
Built-in stereo speaker system
Full-function Remote Control
Main parameter
Viewing Picture Size (diagonal)
Resolution:
Power supply
Audio Output Power (THD 7%):
Aspect Ratio:
TV System:
Video Signal System:
Receiving Channel:
High-Definition Multimedia Interface (HDMI) Input
YCb(Pb)Cr(Pr) Input
Composite Video Input
Analog RGB (VGA) Input
Audio Input x 2
Headphone Output
Coaxial Output
USB Input
Horizontal definition (TV line)
19 inches
1366x768
DC 12V,3A(Power adaptor supplied)
2x3W
16:9
ATSC Digital system and NTSC Analog system
NTSC
Cable :1-135/ Air: 2-69 (ATV&DTV)
x2
x1
x1
x1
x1
x1
x1
Composite Video Input >=350
Video Input >=400
YCb(Pb)Cr(Pr) >=400
Power adapter...................................
Infrared Remote Control....................
User s Manual .................................
Battery(AAA)................................... 2
22 inches
1920x1080
24 inches
1920x1080
1
1
1
-4-
Base Stand Assembly Instruction
1. Place the TV with the display side down on a flat surface. Use a cloth to protect .the display
Position the stand base plate onto the bottom of the stand pole.
2. Attach the stand base plate to the stand pole by firmly tightening the supplied screw.
-5-
INSTALLATION
Front panel
30 30
1: Remote control sensor.
2: Indicator LED: BLUE POWER ON.
RED STANDBY.
3: Side panel keys
REAR Connections
Side panel
3
1
2
1. SOURCE:
2. MENU:
3. CH+/CH-:
change the channel up and down. In MENU mode, press
"CH+" or "CH-" to select items in standby mode, press
"CH+" or "CH-" to turn on the TV.
4. VOL+/VOL-:
press "VOL+ " or "VOL- " to adjust the item that you
selected.
5. STANDBY:
from STANDBY mode. Press it again to turn the set
back to STANDBY.
Display the input source menu.
Display main MENU.
In TV mode, press "CH+" or "CH-" to
Adjust sound level. In MENU mode,
Press this button to turn the unit ON
SOURCE
MENU
CH+
CH-
VOL+
VOL-
STANDBY
1
2
3
4
5
POWER
COMPOSITE COMPONENT
LYPbPr
VIDEO R
All the terminals are (from left to right):
POWER SOCKET, VIDEO, AUDIO INPUT, YPbPr INPUT
Note: AV and YPbPr share one audio channel.
SIDE Connections
VGA
HDMI1 HDMI2
USB
All the terminals are (from left to right):
HDMI1, HDMI2, USB, VGA, HEADPHONE, PC AUDIO, COAXIAL, RF.
Note: 1. When HDMI1 has an input signal coming from a DVI source then the audio input signal must be
connected to the PC audio input.
2. When HDMI2 has an input signal coming from a DVI source then the audio input signal must be
connected to the YPbPr/AV audio input.
-6-
HEADPHONERFPCAUDIO COAXIAL
ANTENNA
Note:
Aerial connections: IEC (female).
Input impendance:75 unbalanced.
PC
STEPS:
Be sure both the TV and computer are set to
Power off.
1.Connect VGA and audio cable.
2.Connect the power cord.
3.Power on the TV, switch to PC mode.
4.Power on the PC.
This sequence is very important.
INSTALLATION
HDMI1 HDMI2
VGA
USB
HEADPHONERFPCAUDIO COAXIAL
-7-
Loading...