HAIER LE75B9300U User Manual

MARQUE :

HAIER

REFERENCE :
CODIC :

PROVISOIREMENT EN ANGLAIS

LE75B9300U 4K UHD

4293150

NOTICE

LE75B9300U

Please read this manual carefully before operating the unit,and keep it for
future reference.

Welcome

Important Information

01 Safety Warnings

2

2

Safety notice

Warning and cautions

3

4

Caution

Base Stand Assembly Instruction

02 Introduction

5

Main Features 5

Main Parameter 5

Installation 5

6

Wall Mounting Installation Guidelines

Front Control Panel

7

8

Rear/Side Sockets

8

Connecting to your Haier TV

Common Interface

9

11

Remote Control

03 Remote Control

12

Teletext

13

Installation Guide

04 Operation

14

Picture menu

Sound menu

Network menu

Lock menu

USB play

Photo

15

15

16
16

17

Setup menu

Channel menu

19

19

Trouble shooting

05 Trouble shooting

20

icationSpecif 23

06 Specification

Music

Movie

Thanks for buying this 75" LED LCD TV.This guide will help you set up and begin using your TV.

IMPOR

TANT INFORMATION

READ ALL INSTRUCTIONS BEFORE USE AND KEEP FOR FUTURE REFERENCE.

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).NO USER SERVICEABLE PARTS INSIDE.
FOR ANY PROBLEMS, REFER SERVICING TO THE CUSTOMER HELP LINE. THERE IS A LIGHTNING ARROW SYMBOL IN
THE TRIANGLE: THIS SYMBOL INDICATES HIGHVOLTAGE IS PRESENT INSIDE. IT IS DANGEROUS TO MAKE ANY KIND OF
CONTACT WITH ANYINSIDE PART OF THIS PRODUCT.

THERE IS A EXCLAMATION MARK IN THE TRIANGLE: THIS SYMBOL ALERTS YOUTHAT IMPORTANT LITERATURE

CONCERNING OPERATION AND MAINTENANCE HAS BEEN INCLUDED WITH THIS PRODUCT.

CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK AND FIRE, DO NOT PUT THE TV SET NEAR

SOURCES OF HUMIDITY. DO NOT USE ANY ABRASIVE CLEANERS WHICH MAY SCRATCH OR DAMAGE

THE LCD SCREEN. AVOID CONTACT WITH OBJECTS THAT MAY SCRATCHTHE LCD SCREEN.

NOTE: SERVICING THE UNITYOURSELF IS UNAUTHORISED AND COULD LEAD TO INJURY OR PRODUCT

DAMAGE. REFER ALL SERVICING TO THE CUSTOMER HELPLINE.

Now you can get star

ted!

01 Safety warnings

75" UHD

Digital LED LCD TV
Remote control
AAA battery x2
Instruction Manual
Warranty Card
Screws
Stand

AV adaptor cable
YPbPr adaptor cable

Safety notice

EN-3

CAUTION:When the apparatus was in
electrostatic circumstance, it maybe
malfunction and need to reset by user.

Dim:515*320 mm(у ᤢᓋᓝε

Warning

High voltages are used in the operation of this
television receiver. Do not remove the cabinet
back from your set. Refer servicing to qualied
service personnel.

Warning

To prevent re or electrical shock hazard, do
not expose the television receiver to rain or
moisture.

Warning

Do not drop or push objects into the
television cabinet slots or openings. Never
spill any kind of liquid on the television
receiver.

Caution

Do not block the ventilation holes in the back
cover. Adequate ventilation is essential to
prevent failure of electrical components.

Caution

Do not trap the power supply cord under the
television receiver.

Caution

Never stand on, lean on, or suddenly push the
television or its stand. You should pay special
attention to children. Serious injury may result if
it should fall.

Caution

Do not place your television on an unstable cart,
stand, shelf or table. Serious injury to an
individual , and damage to the television, may
result if it should fall.

Caution

When the television receiver is not used for an
extended period of time, it is advisable to
disconnect the AC power cord from the AC
outlet.

Caution

If the television is to be built into a compartment
or similar enclosure, the minimum distances must
be maintained. Heat build-up can reduce the
service life of your television, and can also be
dangerous.

WARNING AND CAUTIONS

EN-4

Panel

PAL-B/G ,I , D/K

PAL/SECAM/MPEG2/MPEG4/H.265

AC 100-240 V 50/60Hz

2x10W

RJ45 x 1

H

nterface (HDMI) x 3

YPbPr x 1

AV x 1

75"

CI x 1
USB x 3
RF x 1

Optical x 1
Composite video input >=350

YPbPr >=400

Headphone x 1

TV System

Video Signal System

Input Power Voltage

Power consumption
Standby Power consumption
Audio Output Power (THD 7%)
Signal Input

Signal output

Horiz

(TV line)

SECAM-B/G , D/K , L

≤0.50W

DVB-T/T2, DVB-C

INSTALLATIONCAUTION

*Locate the TV in the room where light does
not strike the screen directly.
*Total darkness or a r tion on the picture
screen can cause eyestrain. Soft and indirect
lighting is recommended for comfortable
viewing.
*Allow enough space between the TV and the
wall to permit ventilation.
*Avoid excessively warm locations to prevent
possible damage to the cabinet or premature
component failure.
*Do not cover the ventilation openings when
using theTV.

Main parameter

Main features

4 NICAM˗

5

T˗ime-shift

3

HDMI inter face

˗

High luminance, wide viewing

angle˗

2

Used as Television, display terminal

˗

1

Never tamper with any components inside the
TV, or any other adjustment controls not
described in this manual. All LED-TV's are high
voltage electrical equipment.
When you clean dust or any water dr
SCREEN or CABINET or around any of the
buttons or connectors, the power cabled should
be removed from the power socket. Wipe the TV
with a soft, dry, dust free cloth.
During thunderstorms, unplug the power cable
and aerial / antenna cable to prevent damage to
your TV and any other devices connected to it.
All repairs to this TV should only be performed
b

TV service

personnel.

02 Introdution

Introduction

EN-5

99CH(ATV);700CH(DVB-T/T2+DVB-C)Storage channel number

280W

~

Introduction

EN-6

Base Stand Assembly Instruction

1

2

3

(blanket, foam, cloth, etc.) to prevent any

damage to the TV.

Position the TV stand with the curved bracket

facing the front of the TV.

Pls ensure that the legs of the TV stand are pointed outward with and with the longer leg
pointed toward the front of the TV.

Attach the TV stand to the bottom of the TV with the eight MB6 (26mm) black screws.

170

10

67

50

67

50

WALL MOUNTING INSTALLATION GUIDELINES

(75”)

This television can be wall mounted as follows:

Introduction

EN-7

holes on the back of the television.

1

Locate the TV in a room where light does not strike the screen directly. Total darkness or a
reflection on the screen can cause eyestrain. Soft and indirect lighting is recommended for
comfortable viewing.
Allow enough space between the TV and the wall to permit ventilation.

Please do not attempt to rotate the TV on the stand.

Avoid excessively warm locations to prevent possible damage to the cabinet or premature
component failure.

INSTALLATION NOTES

M8

M8

M8

M8

170

10

67

50

67

50

Introduction

EN-8

Rear/Side Sockets

Remote control sensor.
Indicator LED:

RED: STAND BY.

Key board.

SOURCE

Displa1

3

2

4

5

y the input source menu.

MENU

Display main MENU.

CH+/CH-

In TV mode,press CH+ or CH- to change
the channel up and down.
In MENU, press CH+ or CH- to select items .

POWER

VOL+/VOL-

Adjust sound level.

In MENU,adjust the item that you selected.

Front control panel

3

30 30

≤8m

POWER

input/output

input

RJ45
HDMI 1

input

HDMI 2

input

HDMI 3

input

input

input

RF

1

2

3

4

6

7

9

8

5

12

13

10

OPTICAL

COMMON INTERFACE(CI)

input

AV

analogue audio output

HEADPHONE

YPbPr

digital audio output

input
input

USB
USB

input

USB(3.0)

11

RF

USB

USB

HDM I3

12

13

RJ45

OPTICAL OUT

ARC

Mini AV Mini YPbPr

CI CARD

Introduction

Connecting to your Haier TV

G Green (Y)

B Blue (Pb/Cb)

W White(AUDIO-L )

R Red (AUDIO-R, Pr/Cr

)

Y Yellow (VIDEO)

Amp lifier

EN-9

CVB S, DVD Pl ayer or o ther

mac hine wi th YPbPr/ YCbC r.

G R

B

RY W

CVBS, DVD Player or other
machine with CVBS/S-Video and Audio

Audio/Video machine
with HDMI interfaces

RJ45

OPTICAL OUT

ARC

RF

USB

USB

HDM I3

Mini AV Mini YPbPr

CI CARD

170

10

67

50

67

50

EN-10

Introduction

Connec ting a DVD player / Satellite / cable
set top box receiver / games console / PC or
Laptop

There are several options to connecting a DVD
player / Satellite or Cable set top box receiver /
games console / PC or Laptop to your TV.

Option 1 HDMI

If the device you want to connect to the TV
is switched on, switch off the device first.
Connect a HDMI cable (not supplied) from
the HDMI socket on the TV to the DVD player /

Satellite or cable receiver or games consol.
Switch on the device you have just
connected to the TV

To select the device connected with the
HDMI cable press the SOURCE button on the
re

mote and use the keys to select HDMI and

press the OK button.

Option 2 AV Audio Visual

(Yellow/White/Red)
Make sure that both TV and the device are
switched off before connec tin

g.
Connect the AV cables (not supplied) from
the Video (yellow) and Audio (white, red)

sockets on the TV to the DVD player or games
console etc.

To select the device connected with the

cable press the SOURCE button on the
remote and use the keys to selec t AV and
press the OK button.

Option 3 YPbPr
(Green/Blue/Red)+(White/Red)

Make sure that both TV and the device are
switched off before connec ting.

Connect the cables (not supplied) from the
YPbPr IN sockets Y, Pb, Pr (green, blue, red) and
L-Audio-R (white, red) on the TV to the DVD player
or games console etc.

AV

To select the device connected with the

cable press the SOURCE button on the

remote and use theƷ keys to select and

pre

ss the OK button.

Option 4 USB

Most USB sticks can be connected to your TV
and some digital cameras may also work.
Connect USB stick (not supplied) or a USB
cable (not s

upplied) to the TV.

To select the USB device connected to the TV,
press the SOURCE button on the remote and
use the keys to select USB and press the
OK button.

Note 2. Apple iPhones and iPods are not
compatible with your TV.

Note 3. When connecti

ng any device to the USB
connection, keep the USB cable length as short
as possible.

Option 5

Option 6

YPbPr

YPbPr

Note1:Only *.jpg , *.mp3 , *.txt , *.avi ,*.mp4 , files will
work, other file types are not guaranteed and may not.

HEADPHONE OUTPUT

is a digital audio connection used to
connect audio equipment, for example home
theatres and other digi

tal HiFi systems over
short distances. The signal is transmitted over
either a coaxial cable with RCA connectors.
Make sure that both TV and the device are
switched off before connec ting.
Connect the AV cables (not supplied) from
the

socket on the TV to the Home Theater

sound system or digital HiFi system etc.

Inser t the plug of the earphone into the headphone
socket on the TV. The TV speakers are now muted.
Alternatively you can also plug in external speakers if
required.

DIGITAL AUDIO OUT(OPTICAL )

OPTICALL

Connecting to your Haier TV

OPTICAL

EN-11

The common interface (CI) slot is designed to

accept the conditional Access (CA) Module and
Smart card in order to view the pay TV
programmes and additional ser vices.
Contact your Common Interface ser vice provider
to get more information about the modules and
subscription.
Please noted that CA modules and smart cards
are neither supplied nor optional accessories
from us.

COMMON INTERFACE

Introduction

Press to turn the TV on or .

(Power)

S.MODE

Press to select the sound mode.

P.MODE

Press to select the pic ture mode.

0-9

Press to enter a channel number
or password.

Q.VIEW

Press to switch to the last viewed
channel.

SLEEP

Press to set the sleep timer.

VOL +/-

Press to adjust the volume level.

(Mute)

Press to turn the sound on or

.

AUDIO(I/II)

Press to select Mono,Nicam stereo
for ATV channel.Select Audio
language for DTV channel.

SUBTITLE

Press to turn the subtitle on or o

.

Press to open a favorite channel
list.In teletext mode,press to
hold a page.

03 Remote Control

Remote Control

EN-12

SCREEN

Press to change picture aspect ratio.

Press to open the on-screen menu.In teletext
mode,press to open the INDEX page.

Press to navigate the on-screen menu.

Press to c m a selection.OK

Press to return to the previous screen.In teletext
mode,press to enter mix mode.

(reverse)

(forward)

Press to fast forward or reverse
playbadk in multimedia mode.

In teletext mode,press to open orclose teletext page.

Presstodisplay main menu inthe MHL mode,for
exampletheAPP menu.

SOURCE Press to open the input source list.

P Press to change the channel.

Press to display the channel information.
In teletext mode,press to revealthe hidden
information.

Press to open the channel list.In teletext mode,
press to switch the image to top,bottom or full.

Press to open the YouTube.

Press to close the on-screen menu.In teletext
mode,press to hide the text.

16

17

18

19

20
21

22

23

24

25
26

Press to select previous or next e.

(previous)
(next)

Press to stop multimedia playback.

GUIDE

Press to display electronic programme guide
in TV mode. Press to enter the teletext subpage.

(REC)

Press to record the TV program you are watching
in DTV mode.

Press to play/pause in multimedia mode,

(play/pause)

Insert Batteries into the Remote Contol

1. Remove the battery cover.

2. Inserting the 2 AAA 1.5V batteries making sure the polarity
(+ or -) of the batteries matches the polarity marks inside the unit.

3. Mount the battery cover. Replace with new batteries when the
TV set begins to show the following symptoms:Operation is
unsteady or erratic. Sometimes the TV set does not function
with Remote Control Unit.

Remark:

1) Alkaline Battery Recommeded.

2) Remove batteries when they are exhausted or if the remote
control is not to be used for

long time.

Press to open the home mode.

Time Shift in DTV mode.

E

TEXT

SELECTING A PAGE

DIRECT ACCESS

TO THE ITEMS

SUB CGUIDE/ ODE

HOLDFAV/

REVEALINFO/

?

Press:

You will obtain :

TELETEXT

Enter the number of the page required using the 0 to 9 up/down. Example:
page 120, enter 120. The number is displayed top left, the counter turns and
then the page is displayed. Repeat this operation to view another page. If
the counter continues to search, this means that the page is not
transmitted. Selec t another number.

Coloured are as are displayed at the bottom of the screen. The 4 coloured
keys are used to access the items or corresponding pages. The coloured
areas flash when the item or the page is not yet available.

This returns to the contents page (usually page 100).

Press the bu

tton and enter the 4-digit number to enter a secondary page.

To freeze the page.

To display or hide the concealed information (games solutions).

This is used to call or exit teletext modes. The summary appears with a list
of items that can be accessed. Each item has a corresponding 3 digit page
number.

Teletext is an information system broadcast by certain channels which can be consulted like
a newspaper. It also offers access to subtitles for viewers with hearing problems or who are
not familiar with the transmission language(cable networks, satellite channels, etc.)

Remote Control

EN-13

MIXBACK/

This will superimpose the teletext data on top of the TV picture. Press
button again to return to full text.

EXITEXIT/

Hide th e t eletex t.

SIZECH.LIST/

Swi tch the i mage to t op, bott om.

INDEX

Operation

04 OPERATION

First Time Installation

EN-14

please according to the Text Tip to First Time Setup.

Home:

ᇻO

MEᇼ menu.

ᇻᇼᇻ ᇼǏ ǐ/Ǐ ǐ

Press H button to enter the HOME

Press ▼▲ŻŹbutton to select

sources and application

Press

to select .

.

APPLI CATI ONS

TV SETTINGS

Press to enter setting .

P

ress MENU button to display the main menu.

Press ▼▲ŻŹbutton to

select what you want set.

ᇻᇼᇻᇼǏ ǐ/Ǐ ǐ

OK

OK

Remarque: Définissez le mot de passe initial de votre
téléviseur.
Si le pays sélectionné est la France, le
Le mot de passe ne peut pas être défini comme 0000.

Operation

EN-15

Sound

P

ress MENU bu tto n to d isp lay t he ma in me nu. Press ŻŹ

button to se lec t SOU ND in t he ma in me nu,

Ǐ ǐǏ ǐ

PressǏMENUǐto ent er th e mai n menupre ss

Ǐ ǐǏ ǐto se lect picture menu 澞ŻŹ

P

icture

1. ▼▲:

2. ŻŹ

Pr

essᇻᇼᇻ ᇼto sel ect

PressǏ ǐǏ ǐto a djust or select.

Picture Mo de/ Con tra stBr igh tne ss/ Col our /

Tin t/S har pne ss/ CBacklight/ o lor Tem per atu re/ Aspect Ratio/Nois e Red uct ion.

ᇻᇼᇻᇼǏ ǐǏǐ

ptional Economy

Note Press to .

Users

Economy

Press ▼

▲ but ton t o select Picture Mode, th en pr ess ŻŹ

button to se lec t.

(O : vivid stander mild user ).

: PMODE select Pic tur e Mod e qui ckl y

Vivi d

Standard The de fau lt mode, to make users e xpe rie nce h igh -qu ali ty im ages

u nde r nor mal l ight.

Mil

d I

mage color s mor e gen

tle to prote ct ey es.

U

ser-defi ned p ict ure s ett ing s

Reduce scr een b rig htn ess , imp rov ed co ntr ast for energy savin g.

This mode en han ce co ntr ast a nd sh arp nes s to ma ke picture mor

e

vivid .

Picture Mode

Contrast/ Brightness/Colour/Sharpness

Colour Temp

Colour Temperature

Adjust the o ver all c olo r of th e ima ge.

ᇻᇼᇻᇼ.

Ǐ ǐǏ ǐ

ptional

Press ▼▲ to select press

ŻŹto se lec t.

(O :Cool , Normal , Warm ).

Coo

l P

roduces a ge ntl e blu e-h ued i mag e.
Normal Produces a vivid image .
War

m P

roduces a re d-h ued i mag e.

P ▼▲,and press ŻŹ

Adjust ima g

e color dens ity

Adjust the i mag e edg e sha rpn ess

ressᇻ

ᇼᇻ ᇼto s ele ct Ǐ ǐǏ ǐto ad jus t

Contrast A

djust imag e con tra st.

Brightne ss Adjust ima ge br igh tne ss.
Colour
Sharpnes s

Aspect Ratio

Aspect Rat io

Zoom Zoo m

Press ▼▲ to select , press ŻŹto sele ct.

(O :Standar d ).

ᇻᇼᇻᇼǏ ǐǏ ǐ

ptional ,16:9 ,4: 3, 1, 2

Noise Reduction

Setting th e opt ion t o eli min ate i mag e noi se in tensity.

ressᇻᇼᇻᇼto se lec t Noi se Re duc tio n

Ǐ ǐǏ ǐto se lect on/off .

P ▼▲, and pre ss

ŻŹ

Color Temp Normal

Operation

EN-16

Digital Ou tpu t

ŻŹPress b utt on to s ele ct di git al ou tpu t,the n pre ss to sele ct.

(Options:P CM, Auto)

Audio Desc rip tio n

Audio Desc rip tio n

AD Volume

AD Volume

Press ▼▲ button to select , then press

ŻŹ button to choose ON/OFF.

Press ▼▲ button to select , then press ŻŹ

button to adjus t.

ᇻᇼᇻᇼ

Ǐ ǐǏ ǐ

ᇻᇼᇻᇼǏ ǐǏ ǐ

Audio Enhancement

ᇻᇼᇻᇼ

Ǐ ǐǏ ǐ

Press ▼▲ button to select , then press

ŻŹ button to choose off/S urr oun d/dbx-tv

dbx-tvdbx-tv

.

When you sel ect dbx-tv , the f oll owi ng op tio ns wi ll sh ow up dbx-tv

Total S oni c/ Total Volume/ Tota l Sur rou nd.

Audio Enhancement

Network Menu

Pres

utton to select N etw ork i n the m ain m enu .

Press ▼▲ button to select

ᇻᇼᇻᇼ:Network Configuration/IP Config

N etw ork i nfo

etwork test

Network Config urati on

/ŻŹ

Select Wifi or Ca ble n etw ork .

Pressbu tto n to select Network Configuration,

then pr ess b utton t o confirm.

IP/Wifi Confi guration

Network Info

Network test

Wifi Auto Searc h

Sound Mode

Press ▼▲ button to select So und M ode , the n pre ss ŻŹ

button to select. (O : Mus ic/ Mov ie/ Night /Us ers ) .

N : SMO DE s ele ct So und M ode q uic kly

ᇻᇼᇻᇼǏ ǐǏ ǐ

ptional Stan dar d/

ote Press to .

Pressᇻᇼᇻ ᇼto s ele ct:

Ǐ ǐǏ ǐ

▼▲

Press ŻŹto select or adju st.

Sound Mode/Tre ble /Ba ss/ Bal anc e

/Auto

Vol ume

Level/Surround/

Digital Outpu t/A udi o Des cri pti on/ AD Vol ume



Standard Prod uce s a bal anc ed so und i n all e nvi ron men ts.
Music Preserv es th e ori gin al so und .Go od fo r mus ica l pro gra ms.
Movie Enhance s tre ble a nd ba ss fo r a ric h sound experience.

Users Select to cust omi ze so und s ett ing s.

Night E nhan ces v oca ls for spor ts.

Balance

Adjust the left a nd ri ght c han nel o utp ut ba lan ce.

Balance

Auto Volume Level

Auto Volume L eve l

Press ▼▲ button to select , then pres s ŻŹ

button to adjust.

Press ▼▲ button to select , then press

ŻŹ

button to choos e ON/ OFF.

When “ON” is sele cte d, th e vol ume w ill a tte mpt t o sta y at a co nst ant .

ᇻᇼᇻᇼǏ ǐǏ ǐ

ᇻᇼᇻᇼ

Ǐ ǐǏ ǐ

OK OK

SETUP

Press ▼▲ button to select

Press ŻŹt o set .

ᇻᇼᇻᇼ

Ǐ ǐǏ ǐ

:Languag e /Au dio L ang uag e/S ubt itle

Lan gua ge /H ear ing I mpa ire d /Blu e Scr een/PVR File System/First Time
Ins tal lat ion /So ftw are U pda te( USB )/S oft war e Upd ate(NET)/ Res et TV

/HDMI CEC /HDMI Port S ett ing /Hb bTV /Us age M ode .

Operation

EN-17

Languag e

Press  / Ʒ butt on to s ele ct La ngu age . Pre ss ŻŹ to s ele ct th e display

lang uag e.

Audio Lan guage

Press  / Ʒ button to s ele ct Aud io La ngu age . Pre ss ŻŹ to s elect the

Audio lang uag e.

Subtitl e Langu age

Press  / Ʒ butt on to s ele ct Su bti tle L ang uag e. Pr ess ŻŹ to select the

Subtitle l ang uag e.

Hearing I mpair ed

Press  / Ʒ butt on to s ele ct He ari ng Im pai red . Pre ss ŻŹ to s elect it on or

off.

PVR File Sy stem

Recordin g the s ele cte d pro gra m.

Pressb utt on to PVR, then pr ess b utto n to c onf irm

.

Blue Scre en

Press  / Ʒ button to s ele ct Bl ue Sc ree n. Pr ess ŻŹ t o sel ect i t on or off.

First Time I nstal latio n

Press  / Ʒ butt on to s ele ct Fi rst Ti me In sta lla tio n,

then press b utton t o ent er su b-m enu .
Details ca n be fo und i n pag e1.

Usage Mode

Softwar e Updat e(USB )

Reset TV

HDMI CEC

You ca n sel ect H ome M ode o r Sho p Mode.
When in Shop M ode ,th e fol low ing l abe l wil l s how up.

HDMI PORT SE TTING

HbbTV

You ca n sel ect O N/O FF fo r Hbb TV..

Channel

Press ▼▲ button to sele ct

Press ŻŹto en ter

ᇻᇼᇻᇼ

Ǐ ǐǏ ǐ

: DVB An ten na/ Aut o Sca n/A nal ogu e Man ual

Sc an/ Dig ita l Man ual Scan /Cha nne l Lis t/S ignal Information.



OK

OK

OK

Note:when you choose HDMI 2.0 full, this HDMI can receive 2160p @60Hz 4:4:4;
when you choose HDMI 2.0 light ,this HDMI can receive 2160p@60Hz 4:2:0 and
the below.

Please refer to the real TV specific picture

Auto Tuning

Digital Ma nua l Tuni ng

Analo gue M anu al Tun ing

Operation

EN-18

Chann el Li st

Signa l Inf orm ati on

Chann el li st

Schedule L ist

Time

Press ▼▲ b utt on to s ele ct

Press ŻŹto s et.

ᇻᇼᇻᇼ

Ǐ ǐǏ ǐ

:Off Time /On Time/Sleep Timer /OS D

Tim er/ Aut o Sta ndb y/Time Zone .

Sleep Ti mer

Sleep Ti mer,

ᇻᇼᇻᇼǏ ǐǏ ǐ

ption al off, , , ,

Press ▼▲ b utt on to s ele ct Pre ss ŻŹto se lec t.

(O : 10 min 20min 30 min 60min,90mi n,1 20m in, 180 min ,24 0mi n ).

OSD Timer

OSD Timer,

ᇻᇼᇻᇼǏ ǐǏ ǐ

ptional Aways , , , s

Press ▼▲ b utt on to s ele ct Press ŻŹto s ele ct.

(O : 5 s 15s 30s 60 ).
Auto Stand by

Auto Stand by,

ᇻᇼᇻᇼǏ ǐǏ ǐ

ption al

Press ▼▲

button to se lec t Press ŻŹto s ele ct.

(O : ).Off, 3H , 4H, 5 H

Tim e Zon e

Tim e Zon e,

ᇻᇼᇻᇼǏ ǐǏ ǐPress ▼▲ b utt on to s ele ct Press ŻŹto s ele ct.

Off Ti me

On Time

LOCK

Press ▼▲ b utt on to s ele ct

Press ŻŹto s et.

ᇻᇼᇻᇼ

Ǐ ǐǏ ǐ

:System/Hot el Lo ck/ Set P ass wor d/C hannel

Lo ck/ Par ent al Gu idance

Set Passwo rd

EN-19

Operation

Channel Lo ck

Some progr am ma y not b e sui tab le fo r chi ldr en, t hro ugh Parental Guidance
set-up ,paren ts ca n shi eld u nsuitable sho w aut omatically.

Pressb utt on to select Parental Gu ida nce .

Pressb utt

Note: use the function must enter a four-digitpassword. The factory password
is 0000. If you forget the password,you can use the super password:9443.

on t o sel ect Off, 4 ,5, 6, 7.. .18.(A ge of c hil dre n)

Parental Guid anc e

SMART MEDIA

Movie

Music

Photos

Programm e Gui de

Press G button to ente r PRO GRA MME G UID E men u.

ᇻUI DEᇼ

EN-20

EN-21

EN-22

Television picture quality:

Additional features:

NICAM stereo sound system .

Digitally interactive.
Digital text.
Digital video broadcasting (DVB) subtitles available.
Auto setup.
Auto scan for new channels.
Now and next programme guide.
7 day electronic programme guide (EPG).
Top up TV compatible.
CI slot.
Audio description compatible.

Sound quality:

Digital features:

Standby Power
consumption

≤0.50W

* The part speci

cations of this TV set provided here

are for reference only.

Di

erences may occur as product technology is updated.

Design and speci

cations are subject to change without notice.

Connec tivity:

3 HDMI sockets.
1 RJ45 socket.

RF input socket.
Component video socket.
Composite socket.
3 USB port.
1 Headphone por t.
1 port.

Optical

Supported Systems:PAL+SECAM
Storage channel number:

TV(RF):75¡ Imbalance

YPbPr/HDMI Video Input:480i, 480p, 576i, 576p, 720p, 1080i, 1080p，2160p

DTV Tuner Decorder

DVB-T/T2, DVB-C
16/32/64/128/256 QAM Modulation

/QPSK Modulation

MPEG2,MPEG4,H.265

IHDntegrated digital.
Screen Size: 190.5 cm
Resolution 3840 x 2160 Pixels.

75" HD Digital LED LCD TV

2 x 10 watts RMS power output.

UHF/VHF tuner ;Sleep timer; ;Picture and text

Parental Rating

Remote control batteries required 2 x AAA (included).
VESA Mount Size: 200 x 400 mm
Package Size (WxHxD):

Set Size (WxHxD) with Stand:

1679x1028x363mm
Set Size (WxHxD) without Stand:
Package weight : 45kg

Set weight without stand: 32.6 kg

Set weight with stand: 33.8kg

23-NE

Specification

Specification

1679x963x68mm

1880x215x 1160mmm

99CH(ATV);700CH(DVB-T/T2+DVB-C)