Haier LE46M600SF User Manual

LE39M600SF LE46M600SF LE50M600SF

Please read this manual carefully before operating the unit,and keep it for future reference.

Welcome Important Information

01 Safety Warnings

2 Safety notice Warning and cautions

Main Parameter Base Stand Assembly Instruction

02 Introduction

7 Wall Mounting Installation Guidelines

Front Control Panel

9 Rear/Side Sockets

Connecting to your Haier TV

Common Interface

Remote Control

03 Remote Control

15 Teletext

Installation Guide

04 Operation

CHANNEL MENU 18

Auto Tuning (DVB-T) 18 Auto Tuning (DVB-C) 19

DTV Manual Tuning (DVB-T) DTV Manual Tuning (DVB-C)

SOUND MENU

TIME MENU

OPTION

LOCK MENU

EPG Menu(Electronic Program Guide)

PVR function

Prepare to re cord the pro gram

Rec ord the prog ram

Play the record

Timeshift function

Prepare to re cord the pro gram

USB D rive Storage Fo rmat

Rec ord a paused DTV progra m to USB storage device

Timeshift limitations

USB Player

Trouble shooting

05 Trouble shooting

PIC TURE MENU 23

ATV Manual Tuning 22

Program edit

CI information

22 23

DVB-S2

First Time Installation

Satellite Managment

Program Edit

Signal Information

CI Information

EPG(Electronic program guide)

MHL User Guide

Specification 34

06 Specification

Auto Tuning (DVB-S2) 19

Thanks for buying this 39"/46"/50"LED LCD TV . This guide will help you set up and

begin using your TV.

IMPOR

TANT INFORMATION

READ ALL INSTRUCTIONS BEFORE USE AND KEEP FOR FUTURE REFERENCE.

CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).NO USER SERVICEABLE PARTS INSIDE.

FOR ANY PROBLEMS, REFER SERVICING TO THE CUSTOMER HELP LINE. THERE IS A LIGHTNING ARROW SYMBOL IN THE TRIANGLE: THIS SYMBOL INDICATES HIGH VOLTAGE IS PRESENT INSIDE. IT IS DANGEROUS TO MAKE ANY KIND OF CONTACT WITH ANYINSIDE PART OF THIS PRODUCT.

THERE IS A EXCLAMATION MARK IN THE TRIANGLE: THIS SYMBOL ALERTS YOU THAT IMPORTANT LITERATURE CONCERNING OPERATION AND MAINTENANCE HAS BEEN INCLUDED WITH THIS PRODUCT.

CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK AND FIRE, DO NOT PUT THE TV SET NEAR

SOURCES OF HUMIDITY. DO NOT USE ANY ABRASIVE CLEANERS WHICH MAY SCRATCH OR DAMAGE THE LCD SCREEN. AVOID CONTACT WITH OBJECTS THAT MAY SCRATCH THE LCD SCREEN.

NOTE: SERVICING THE UNIT YOURSELF IS UNAUTHORISED AND COULD LEAD TO INJURY OR PRODUCT

DAMAGE. REFER ALL SERVICING TO THE CUSTOMER HELPLINE.

Now you can get star

ted!

Remote control

Instruction Manual

AAA ba x2ttery

01 Safety warnings

39" FULL HD 1080P Digital LED LCD TV

Quick start guide

Stand

MHL Cable (optional) MHL Connector (optional)

Remote control

Instruction Manual

AAA ba x2ttery

46" FULL HD 1080P Digital LED LCD TV

Quick start guide

Stand

MHL Cable (optional) MHL Connector (optional)

Remote control

Instruction Manual

AAA ba x2ttery

50" FULL HD 1080P Digital LED LCD TV

Quick start guide

Stand

MHL Cable (optional) MHL Connector (optional)

Safety notice

EN-3

Warning: To avoid any injury caused by lean of the product, please always ensure the whole product was placed within the table surface in horizontal.

CAUTION: When the apparatus was in electrostatic circumstance,it maybe malfunction and need to reset by user.

Dim:515*320mm(不包括底座）

Warning High voltages are used in the operation of this television receiver. Do not remove the cabinet back from your set. Refer servicing to qualified service personnel.

Warning To prevent fire or electrical shock hazard, do not expose the television receiver to rain or moisture.

Warning Do not drop or push objects into the television cabinet slots or openings. Never spill any kind of liquid on the television receiver.

Caution Do not block the ventilation holes in the back cover. Adequate ventilation is essential to prevent failure of electrical components.

Caution Do not trap the power supply cord under the television receiver.

Caution Never stand on, lean on, or suddenly push the television or its stand. You should pay special attention to children. Serious injury may result if it should fall.

Caution Do not place your television on an unstable cart, stand, shelf or table. Serious injury to an individual , and damage to the television, may result if it should fall.

Caution When the television receiver is not used for an extended period of time, it is advisable to disconnect the AC power cord from the AC outlet.

Caution If the television is to be built into a compartment or similar enclosure, the minimum distances must be maintained. Heat build-up can reduce the service life of your television, and can also be dangerous.

WARNING AND CAUTIONS

EN-4

Panel

PAL-B/G ,I , D/K

PAL/SECAM/MPEG2/MPEG4/H.264

AC 100-240 V 50/60Hz

2x10W

Analog RGB(PC) x1; PC audio x1

High-Definition Multimedia Interface (HDMI) x 2/MHL x 1

Composite Input x 1

YPbPr x 1

SCART Inputx 1

78W

CI x 1 USB x 1

x 1

RF Co-Ax x 1

LNB IN

Composite video input >=350 YPbPr >=400

Headphone x 1

TV System

Video Signal System

Input Power Voltage

Power consumption Standby Power consumption Audio Output Power Signal Input

Signal output

Horizontal definition (TV line)

SECAM-B/G , D/K , L ,

≤0.50W

DVB-T, DVB-C, DVB-S2

INSTALLATIONCAUTION

*Locate the TV in the room where light does not strike the screen directly. *Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. *Allow enough space between the TV and the wall to permit ventilation. *Avoid excessively warm locations to prevent possible damage to the cabinet or premature component failure. *Do not cover the ventilation openings when using theTV.

Main parameter

Main features

4 NICAM；

5 T ；ime-shift

HDMI interface and SCART

Inter face；

High luminance, wide viewing

angle；

Used as Television, display terminal,

PC display；

Never tamper with any components inside the TV, or any other adjustment controls not described in this manual. All LED-TV's are high voltage electrical equipment. When you clean dust or any water drops off the SCREEN or CABINET or around any of the buttons or connectors, the power cabled should be removed from the power socket. Wipe the TV with a soft, dry, dust free cloth. During thunderstorms, unplug the power cable and aerial / antenna cable to prevent damage to your TV and any other devices connected to it. All repairs to this TV should only be performed by qualified TV service personnel.

02 Introdution

Introduction

EN-5

5000(DVB-S2);510(DTV);100(ATV)Storage channel number

SCART Output x 1

100W

COAXIAL Output x 1

120W

SUPPORTED MODE

1024x768

1280x1024

640x480

31.47

800x600

37.88

48.36

63.98

RESOLUTION

V.Freq.(Hz) H.Freq.(KHz)

1366x768

47.7

Introduction

EN-6

1920x1080

66.64

EN-7

Base Stand Assembly Instruction

1. Place the TV with the display side down on a flat surface. Use a cloth to protect the display.Position the stand base pillar onto the bottom of the TV.

2. Attach the stand base plate to the stand pole by firmly tightening the supplied screws.

INSTALLATION NOTES

Locate the TV in a room where light does not strike the screen directly. Total darkness or a reflection on the screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.

Allow enough space between the TV and the wall to permit ventilation.

Avoid excessively warm locations to prevent possible damage to the cabinet or premature component failure.

Please do not attempt to rotate the TV on the stand.

Introduction

EN-8

WALL MOUNTING INSTALLATION GUIDELINES

2.Use the four screws provided to fix the TV onto a wall mounting bracket (not included) via the four VESA standard holes on the back of the television.

Introduction

This television can be wall mounted as follows:

1.Place the LED LCD Television onto a solid surface. Please place some soft material over the front of the screen to protect it from any damage.

M6X8 M6X8

200mm

AC-INPUT

100-240V~50/60Hz

VIDEO/Y Pb Pr L R

DIGITAL AUDIO OUTPUT (COA XIAL)

SCARTLNB IN

R F

VGA

PC AUDIO

COM MON INT ERFACE (CI)

HEADPHONE

HDMI1(ARC)

HDMI2/MHLUSB

Rear/Side Sockets(39",50")

Remote control sensor. Indicator LED:

RED: STANDBY.

Key board.

SOURCE

Display the input source menu.

Display main MENU.

CH+/CH-

In TV mode,press CH+ or CH- to change the channel up and down. In MENU, press CH+ or CH- to select items .

STANDBY

VOL+/VOL-

Adjust sound level. In MENU,adjust the item that you selected.

Introduction

Front control panel

EN-9

VIDEO

input

L/R AUDIO

input

digital audio output

input

PC AUDIO

input

HEADPHONE analogue audio output

YPbPr

input

13 14

input

8 9

AC Power Source

DIGITAL AUDIO OUTPUT(COAXIAL)

input

LNB IN

HDMI1(ARC)

COMMON INTERFACE(CI)

VGA INPUT ANT

input

SOURCE MENU CH+ CHVOL+ VOLSTANDBY

1 2

5 6

13 15

input/output

SCART

30 30

≤8m

input

USB

input

HDMI2/MHL

Rear/Side Sockets(46")

Introduction

VIDEO

input

L/R AUDIO

input

digital audio output

input

PC AUDIO

input

HEADPHONE analogue audio output

YPbPr

input

13 14

input

AC Power Source

DIGITAL AUDIO OUTPUT(COAXIAL)

input

LNB IN

HDMI1(ARC)

COMMON INTERFACE(CI)

VGA INPUT ANT

input

R F

VGA

PC AUDIO

COM MON INT ERFACE (CI)

HEADPHONE

HDMI1(ARC)

HDMI2/MHLUSB

AC-INPUT

100-240V~50/60Hz

VIDEO/Y Pb Pr L R

DIGITAL AU DIO OUT PUT

(COAXIAL)

SCART

LNB IN

8 9

5 6

13 15

input/output

SCART

input

USB

input

HDMI2/MHL

EN-10

RY W

Audio/Video machine with HDMI interfaces

CVBS, DVD Player or other machine with CVBS/S-Video.

Introduction

Connecting to your Haier TV(39",50")

G Green (Y) B Blue (Pb/Cb) W White(AUDIO-L ) R Red (AUDIO-R, Pr/Cr) Y Yellow (VIDEO)

CVBS, DVD P layer o r other

machine with YPbPr/YCbCr .

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

ATTENTION

RISQUE

CHOC ELECTRIQUE

NE PAS OUVRIR

R F

VGA

PC AUDIO

COM MON INT ERFACE (CI)

HEADPHONE

HDMI1(ARC)

HDMI2/MHLUSB

GRB RW

Amplifier

AC-INPUT

100-240V~50/60Hz

VIDEO/Y Pb Pr L R

DIGITAL AUDIO OUTPUT (COA XIAL)

SCARTLNB IN

EN-11

RY W

Audio/Video machine with HDMI interfaces

CVBS, DVD Player or other machine with CVBS/S-Video.

Introduction

Connecting to your Haier TV(46")

G Green (Y) B Blue (Pb/Cb) W White(AUDIO-L ) R Red (AUDIO-R, Pr/Cr) Y Yellow (VIDEO)

EN-12

CVBS, DVD P layer o r other

machine with YPbPr/YCbCr .

R F

VGA

PC AUDIO

COM MON INT ERFACE (CI)

HEADPHONE

HDMI1(ARC)

HDMI2/MHLUSB

GRB RW

Amplifier

VIDEO/Y Pb Pr L R

DIGITAL AUDIO OUTPUT (COA XIAL)

SCARTLNB IN

EN-13

Introduction

Connecting a DVD p layer/ Satel lite / ca ble set t op box receiver / games console / PC or Lapto p

There are several options to connecting a DVD pla yer / Satellite or Cable set top box rece iver / games console / PC or Laptop to your TV.

Option 1 SCART

Connec t a SCAR T cable ( not sup plied )from the SC ART socket on the TV to the DVD set top box receiver or games consol. To select the device connected with the SCART cable press the SOURCE button on the remote and use the▼▲ keys to select SCART and press the OK button. Note:- The TV will default to the SCART connection when the TV is switched on.

Option 2 HDMI

If th e device you want to connect to the is switched on, switch off the device first. Connec t a HDMI cable (not supplied) from the HDMI socket on the TV to the DVD receiver or games consol. Swi tch on the device you have just connected to the TV. To select the device connected with the HDMI cable press the SOURCE button on the remote and use the▼▲ keys to select HDMI and pre ss the OK button.

Option 3 AV Audio Visual (Yellow/White/Red)

Mak e sure th at both TV and the device are switched off before connecting. Connec t the AV cables (not supplied) from the Video (yellow) and Audio (white, red) sockets on the TV to the DVD p layer or gam es cons ole etc. To select the device connected with the AV cable pre ss the SO URCE bu tton on the re mote and use t he▼▲ keys to select AV and press the OK button.

Option 4 COMPONENT (Green/Blue/Red)+(White/Red)

Mak e sure th at both TV and the device are switched off before connecting.

▼▲

player or cable

YPbPr

Connec t the cables (not supplied) from the COMPONENT IN sockets Y, Pb, Pr (green, blue, red) and L-Audio-R (white, red) on the TV to the DVD player or games console etc. To select the device connected with the COMPON ENT cab le press the S OURCE b utton o n the remote and use the keys to select and press the OK button.

To select th e PC / Lapt op connected with the VGA cab le pres s the SOU RCE but ton on the rem ote and use the key s to select PC and press th e OK button.

Note :VGA is video only. For au dio fro m your PC/La ptop you n eed to conne ct a sepa rate ca ble from the P C Audio (3.5mm jack) to the headphone socket on you PC/Laptop (3.5mm jack)

Opt ion 6 USB

Most USB sticks can be connected to your TV

and s ome dig ital ca meras may al so work . Connect USB stick (not supplied) or a USB cab le (not s uppli ed) to th e TV. To select the USB device connected to the TV, pre ss the SO URCE bu tton on the re mote and use t he keys to s elect U SB and pr ess the OK button. Not e1:On ly *.jp g and *.m p3 file s will work, oth er file t ypes ar e not gua ranteed an d may not . Note 2. Apple iPhones and iPods are not compatible with your TV. Note 3. When connecting any device to the USB connection, keep the USB cable length as short as possible.

Opt ion 7

Opt ion 8

▼▲

HEADPHONE OUTPUT

is a di gital a udio conne ction use d to connect audio equipment, for example home the atres and ot her dig ital Hi Fi systems over short distances. The signal is transmitted over either a coa xial ca ble wit h RCA con necto rs. Mak e sure th at both T V and the d evice are switched off before connecting. Connect the AV cables (not supplied) from the soc ket on th e TV to the H ome Theater sou nd system or d igita l HiFi syste m etc.

Ins ert th e plug of t he earphone into the headphone socket on the TV. The TV speakers are now muted. Alt ernat ively you can als o plug in e xternal s peake rs if required.

DIG ITAL AUDIO O UTPUT (COAXIA L)

COAXIAL

Connecting to your Haier TV

Opt ion 9 MHL I NPUT

Connect the devices which can support MHL function; also function as HDMI input socket.

Opt ion 10 LNB INPUT

Connect the satallite cable with the LNB Port on the back. Aft er that , you can turn o n the eng ine. Pre ss “So urce” to sw itch into th e DVB-S 2 mode an d start the c hanne l search.

Option 5 VGA (15pin Sub-D)

Connect a VGA c able (n ot supp lied) f rom the VGA s ocket o n the TV to t he PC / Lap top.

EN-14

The comm on inte rface (CI) slo t is desi gned to accept the conditional Access (CA) Module and Smart card in order to view the pay TV programmes and additional services. Contact your Common Interface service provider to ge t more infor mation abo ut the mo dules a nd subscription. Please noted that CA modules and smart cards are neither supplied nor optional accessories from us.

COMMON INTERFACE

Introduction

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

Auto Tuning

ATV Manual Tuning Programme Edit Signal Information

DTV Manual Tuning

Software Update(USB)

CI Information

BACK MOVE OK

Pres s to turn t he TV on or o ff.

(Power)

S.MODE

Press to select the sound mode.

P.MODE

Pres s to sele ct the pict ure mod e.

0-9

Pres s to ente r a channel number or password.

Q.VIEW

Pres s to swit ch to the l ast vie wed channel.

SLEEP

Pres s to set th e sleep t imer.

VOL + /-

Pres s to adju st the vo lume le vel.

(Mute)

Press to turn the sound on or off.

AUDIO(I/II)

Pres s to sele ct Mon o,Nica m stere o for ATV channel.Select Audio language for DTV channel.

SUBTITLE

Press to turn the subtitle on or off.

Pres s to open a f avori te channel list.In teletext mode,press to hol d a page.

03 Remote Control

Remote Control

EN-15

SCREEN

Press to change picture aspect ratio. Press to open the on-screen menu.In teletext

mode,press to open the INDEX page.

Press to navigate the on-screen menu.

Press to confirm a selection.OK

Press to return to the previous screen.In teletext mode,press to enter mix mode.

(reverse) (forward)

Press to fast forward or reverse playbadk in multimedia mode.

In teletext mode,press to open or close teletext page. Press to display main menu in the MHL mode,for example the APP menu.

SOURCE

Press to open the input source list.

Press to launch the HDMI2/MHL mode.

Press to change the channel.

Press to display the channel information. In teletext mode,press to revealthe hidden information.

Press to open the channel list.In teletext mode, press to switch the image to top,bottom or full.

3D WORLD

These models do not support 3D feature.

Press to close the on-screen menu.In teletext mode,press to hide the text.

20 21 22

23 24

25 26

Press to select previous or next file.

(previous) (next)

Press to stop multimedia playback.

GUIDE

Press to display electronic programme guide in TV mode. Press to enter the teletext subpage.

(REC)

Press to record the TV program you are watching in DTV mode.

Press to play/pause in multimedia mode.(play/pause)

Insert Batteries into the Remote Contol

1. Remove the battery cover.

2. Inserting the 2 AAA 1.5V batteries making sure the polarity (+ or -) of the batteries matches the polarity marks inside the unit.

3. Mount the battery cover. Replace with new batteries when the TV set begins to show the following symptoms:Operation is unsteady or erratic. Sometimes the TV set does not function with Remote Control Unit.

Remark:

1) Alkaline Battery Recommeded.

2) Remove batteries when they are exhausted or if the remote control is not to be used for long time.

EN-16

TEXT

SELECTING A PAGE

DIRECT ACCESS

TO THE ITEMS

INDEX

SUB PAGE

HOLD

REVEAL

Press:

You will obtain :

TELETEXT

Enter the number of the page required using the 0 to 9 up/down. Example: page 120, enter 120. The number is displayed top left, the counter turns and then the page is displayed. Repeat this operation to view another page. If the counter continues to search, this means tha t the pag e is not transmitted. Select another number.

Coloured are as a re displayed at the b ottom of the screen. The 4 coloured keys are used to access the items or corresponding pages. The coloured areas flash when the item or the page is not yet available.

This returns to the contents page (usually page 100).

Cer tain pages contain sub-pa ges whi ch are autom atica lly dis played successively. This key is used to stop or resume sub-page acquisition. The indication appears top left.

To freeze the page.

To display or hide the concealed information (games solutions).

This is used to call or exit teletext modes. The summary appears with a list of items that can be accessed. Each item has a corre sponding 3 digit page num ber. If th e chann el sele cted do es not broadca st teletext, t he indication 100 will be displayed and the screen will remain blank (in this case, exit teletext and select another channel).

Teletext is an information system broadcast by certain channels which can be consulted like a newspaper. It also offers access to subtitles for viewers with hearing problems or who are not familiar with the transmission language(cable networks, satellite channels, etc.)

Remote Control

Teletext,program,image are displayed together.

MIX

Exit the teletext.

EXIT

Switch the image to top,bottom,full.

SIZE

Operation

04 OPERATION

Password

Please enter old password Please enter new password Confirm new password

The installation guide only appear when the TV first time turn on or reset to factory set.

Installation Guide

1).Press the ▲▼ buttons to navigate the menu and change the settings. Press the OK button to confirm. Select your desired language ,Home/Shop Mode to be displayed on the menu.

2). Press the buttons to select DVB-T/DVBC/ and then press the OK button to confirm.

▲▼

DVB-S2

a. If you select DVB-T, the next step is to select the Tune type and country then press the OK button to start tuning.

b. If you select DVB-C, the next step is to config the DVB-C system like (scan type / Frequency/ Network ID/Symbol (KS/S) then press OK button to into the tune type and country select menu, this step is the same as DVB-T, select the tune type (DT V/ATV).Choose the right country, press OK button to start tuning.

Note: The default password is 0000.

EN-17

Greece

Nederlands

Germany

Portugal

Poland

Italy

Hungary

Luxembourg

Norway

HOM E or Shop m odes

1.When the unit is turn on for the very first time, it will show Initialization set-up menu. After the OSD language is set, the user can choose between "shop mode" and "home mode". When the screen shows the following setting menu and

the cursor stays on the "home mode" choice, press

◀▶

to adjust, and "OK" to enter the menu.

Select the usage mode? sho p mode is for sh op usag e only.

Shop mode

Hom e mode

If "Shop mode" is choosen, the following menu will displayed.

Are you sure to change to Shop mode?

Cancel

Press "OK" to e nter th e next pr ompt me nu

Shop mode is the most energy mode.

Cancel

Continue?

Cho ose "Ca ncel" to go ba ck to the I nitialization set-up menu, and the cursor will stay at the "home mode"choice. cho ose it to g o the nex t menu to c hoose t he country.

Please select an OSD language

English

French

Italiano

Spanish

Deutsch

Nederlands

DVB-S2

c. If you select DVB-S2, you may select to load default DVB-S2 channel list or select to star t a new channel search.

1. 1)Auto Tuning (DVB-T)

1. CHANNEL MENU

Programme(s) Programme(s)

Programme(s)

ATV

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

Auto Tuning

ATV Manual Tuning Programme Edit Signal Information

DTV Manual Tuning

Software Update(USB)

CI Information

BACK MOVE OK

1). Press the MENU button and then press the buttons to select the CHANNEL menu and then press the OK button.

▼▲

2). Press the buttons to select Auto Tuning and then press the OK button.

▼▲

6) Congratulations

Congratulations!!!

Completed Initial Quick Setup.

Enjoy your Haier TV

Press OK to Exit

3). Press the buttons to select DVB-T/DVB-C/ Press select DVB-T and then press the OK button to confirm.

▼▲ DVB-S2

4). In the Tune Type menu, press the buttons to select ATV / DTV / DT V + ATV. Press the button and then press the buttons to select the country where you will operate the TV. Press the OK button to confirm

◀▶

▼

◀▶▼▲

Operation

EN-18

5). After tuning is complete, the channels are arranged in a preset order. If you wish to skip channels, modify the preset order or rename channels, select

Programme Edit under the

Channel menu.

Greece

Nederlands

Germany

Portugal

Poland

Italy

Hungary

Luxembourg

Norway

5). Channel tuning will commence. This operation may take up to minutes. The display will show the progress of the tuning and the number of channels found.

6). If you want to sk ip the ATV tuning, p ress the MENU button to interrupt the tuning half way. A pop-up screen will be displayed, press the◀button to select YES to confirm. You will then go straight to DTV tuning. You may repeat the above step if you also want to skip the DTV tuning. An installation reminder will appear the next time you turn on the TV.

7). After tuning is complete, the channels are arranged in a preset order. If you wish to skip channels, modify the preset order or rename channels, select P

rogramme Edit under the

channel menu.

some

Programme(s) Programme(s)

Programme(s)

ATV

DVB-S2

3). Channel tuning will commence. This operation may take up to The display will show the progress of the tuning and the number of channels found.

4). If you want to skip the ATV tuning, press the MENU button to interrupt the tuning half way. A pop-up screen will be displayed, press the button to select YES to confirm. You will then go straight to DTV tuning. You may repeat the above step if you also want to skip the DTV tuning. An installation reminder will appear the next time you turn on the TV.

some minutes.

◀

3). Press the▼▲buttons to select DVB-T/DVB-C/ . Press select DVB-C and then press the OK button to confirm.

4). Press buttons to select Scan type/Symbol (Ks/S) press the OK button to confirm.

5). In the Tune Type menu, press the buttons to select ATV / DTV / DT V + ATV. Press the button and then press the buttons to select the country where you will operate the TV. Press the OK button to confirm.

DVB-S2

▼▲

◀▶

▼

◀▶▼▲

Operation

EN-19

Greece

Nederlands

Germany

Portugal

Poland

Italy

Hungary

Luxembourg

Norway

6). Channel tuning will commence. This operation may take up to The display will show the progress of the tuning and the number of channels found.

7). If you want to sk ip the ATV tuning, p ress the MENU button to interrupt the tuning half way. A pop-up screen will be displayed, press the◀button to selec t YES to confirm. You will then go straight to DTV tuning. You may repeat the above step if you also want to skip the DTV tuning. An installation reminder will appear the next time you turn on the TV.

8). After tuning is complete, the channels are arranged in a preset order. If you wish to skip channels, modify the preset order or rename channels, select P

rogramme

Edit under the channel menu.

some minutes.

2. 1 ) DT V Manual Tuning (DVB-T)

All the channels including ATV, DTV and Radio can be tuning by one time,if the Tune Type is DTV+ATV .

All t he stored ch annel s will be d isapp ear aft er aut o tunin g .

After auto tuning , the channel will skip to the first DTV channel.

1). Press the MENU button and then press the▼▲ buttons to select the CHANNEL menu and then press the OK button.

Programme(s) Programme(s)

Programme(s)

ATV

1.3 Auto Tuning (DVB-S2)

2). Press the▼▲ buttons to select Auto Tuning and then press the OK button.

3). Press the ▼▲ buttons to select DVB-T/DVB-C/DVB-S2, Press select DVB-S2 and then press the OK button to confirm.

4). Press BLUE key to start a new channel search; Press Exit key to skip the channel search to load the default channel list.

1). Press the MENU button and then press the

▼▲

buttons to select the CHANNEL menu and then press the OK button.

DVB-S2

1.2 ) Auto Tuning (DVB-C)

2). Press the▼▲buttons to select Auto Tuning and then press the OK button.

1). Press the MENU button and then press the▼▲ buttons to select the CHANNEL menu and then press the OK button.

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

Auto Tuning

ATV Manual Tuning Programme Edit

Signal Information

CADTV Manual Tuning

Software Update(USB)

CI Information

BACK MOVE OK

4). Press the MENU button to return back to the main menu.

5). Press the EXIT button to exit the menu.

2. 2 )DTV Manual Tuning (DVB-C)

3). The DTV M anual Tuning screen will pop up. Press the◀▶buttons to select the desired UHF channel and then press the OK button to commence the search of that channel. When the signal has been tuned, the picture and signal strength will be displayed on the screen.

1). Press the MEN U button and then press the buttons to select the CHANNEL menu and then press the OK button.

2). Press the buttons to select CADTV Manual Tuning and then press the OK button.

▼▲

490000

NO SIGNAL

Operation

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

Auto Tuning

ATV Manual Tuning Programme Edit

Signal Information

DTV Manual Tuning

Software Update(USB)

CI Information

BACK MOVE OK

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

Auto Tuning

ATV Ma nual Tun ing Programme Edit

Signal Information

CADTV Manual Tuning

Software Update(USB)

CI Information

BACK MOVE OK

EN-20

2). Press the▼▲buttons to select DTV Manual Tuning and then press the OK button.

3). The CADTV Manual Tuning screen will pop up. Press the▼▲buttons to select(Frequency /Symbol (ks/s/QAM Type QAM) press the OK button to commence the searc h of that channel. When the si gnal has been tuned, the picture and signal strength will be displayed on the screen.

4). Press the MENU button to return back to the main menu.

5). Press the EXI T button to exit the menu.

3.DVB-S2 Operation

3.1First Time Installation

Please press the source button to enter input menu and use/ direction buttons to select DVB-S2 and press OK key to confirm. The Channel List for ASTRA is already installed. You are now ready to watch TV.

If you are using different satellites please follow the system settings instructions to set up the satellite. If you are using more than one Satellite you need to assign the satellites the correct DiSEqC-LNB that is used in your satellite installation.

3.2 Satellite Managment

Configure the settings of satellites.

Satellites' list: Press to select a satellite, whose settings will be shown at right side. LNB Type: Press

◀ /▶ /OK to show the list of LNB

Types which is shown as frequencies of local oscillator. You also can enter frequency by User Single, User Dual at bottom of the list. LNB Power: Press

◀ /▶ to set the LNB power.

22K: Press

◀ /▶ to switch on or off the 22K,which is

set with auto when LNB Type is dual local oscillator.

▼/▲

Operation

Toneburst: Enable or Disable the toneburst s witcher.

DiSEqC1.0:

DiSEqC1.1:

Motor:

DiSEqC1.2:

DiSEqC1.3:

Motor Settings:

Selec t the right port up to 4 for the right LNB.

Selec t the right port up to 16 for the rig ht LNB.

Press LE FT/RI GHT to select DiSEqC1.2 or DiSEqC1.3. Then Pres s OK to show the men u to set position.

Move the motor to a rig ht position to l ock the s ignal.

Move the motor according to the local and sa tellite positions.

Selec t DiSEq C and press OK to open.

Move Aut o:

Move Continue:

Move Step[1]:

Store Position:

Goto Position:

Goto Reference:

Press LEFT/RIGHT to start to move West/East. It will be stopped automati cally w hen the s ignal is locke d.

Press LEFT/RIGHT to start to move West/East. It will keep moving until you stop it.

Press LE FT/RI GHT to move ju st a step.

Store current position o f motor.

Press LE FT/RI GHT to goto the po sitio n stored.

Res t all the p ositi ons.

Goto X: Goto the position calculated from the local and satellite positions.

3.2.1 Satellite settings

Add satellites: Press RED to add a new satellite, in which you must input an un ique lo ngitu de, and edit the

satellite's name with soft keyboard.

Edit satellites: Press GREEN to edit the focused satellite. Delete satellite: Press YELLOW to delete the focused satellite.

Press OK to confirm.

3.2.2 Transponder

Press GUIDE to switch the list to show transponders of the focused satellite. Also you can press GUDIE to switch back to satellites' list.

Add tran spond er: Press RED to add a new transponder. It can't save an ex istin g TP under t he same satellite. Edit transponder: Press GREEN to edit the focuse d trans ponde r. It can' t save an e xisti ng TP under the same satellite. Delete transponder: Press YELLOW to delete the focused transpond er. Press OK to confirm. Single Transponder Scan: Press BLUE to pop the m enu of sc annin g setti ng. After co nfigu ring th e setti ngs, Press OK to star t scannin g. Multi-Transponder Scan:

Press OK to select transponders with the mark”√",then press BLUE to pop the menu of scanning setting. After Configuring the settings, press OK to start multi-transponder scanning.

3.2.3 Channel search

Single Satellite Scan: Press BLUE to pop the menu of scanning settings. Scan Mode: Press

◀/▶ to select defa ult, wh ich sca n the def ault transpo nders b uilt in , Blind S can and NetWork,

which scan with NIT on. Crytped: Press

◀/▶to select All Ch annel s or FTA Channels;

Service Type: Press

◀/▶ to select ALL , DTV or Radio.Press OK to start scanning with the above settings.

Multi-Satellites Scan: Press OK to select satellites with the mark “√" ,then press BLUE to pop the menu of scanning setting. After Configuring like single satellite scan, press OK to start multi-satellites scan.

EN-21

Operation

3.3 Program Edit

To edit your pro gram preferences (skip, favourite, move or delete), you will nee d to enter the Program Edi t Menu.

Delete a TV or R adio Program Select the program and then press the RED button to delete the cha nnel. Move a TV or R adio Program Select the preferred program then press the YELLOW button. Press

◀/▶ to move th e program. Press YELLOW

again to confirm.

Ski p TV or Rad io Program

Select the program you would like to skip and press the BLUE button. A skip symbol is displayed. The program is mar ked as a sk ip.

Set Fa vourite Program

Press▼▲to cho ose the p rogram , pre ss FAV button , it wi ll show o n the right side of the program.Choose the FAV pro gram , press FAV butto n again , you ca n cance l the FAV, the will di sappe ar.Once you r favorite grou p is created, you can p ress th e FAV key to q uickly ac cess your favor ite cha nnel.

3.4 Signal information

It shows the signal quality and signal strange by selectet channel.

3.5 CI information

It shows informations about the CI card that is connectet to tv.

3.6 EPG (Electronic program guide)

The EPG is an on-screen TV guide that shows scheduled programs seven days in a dvance for every tuned ch annel. Press the GUIDE button on the Rem ote Contro l to access guide. It wil l show a list with the current runprogramms.

Select “Programm Guide” and press to switch between Time / Channel. You can use the

▼/▲ key to select the preferred program.

◀/▶

Time:An overview will be shown about the broadcast to the selectet date to c urrent time from the programms.

- Selec t the “Date / Timer” display and press

◀/▶to edit the da te.

Channel:An overview will be shown about the broadcast course of the selectet channel on day you edit befor.

- Selec t the programm display and press ◀/▶to switch the c hanne l Remind:Use BLUE botton to open the reminder setting. Press “Ok” to acknowledge the edit settings. The made settings will be stored in your schedule list. Record:Use RED botton to open th e record set ting. Pres “Ok” to acknowledge the edit settings. The made settings will be stored in your schedule list.

Info:Use Green botton to open the information about the selectet broadcast. Schedule:Use YELLOW botton to open the sch edule l ist from your records and remind settings. Selec tet items can be d elete with “RED” botton.

4) ATV Manual tuning :

You can change the sound system to search the analog TV channels and fine tune the channels , then storage the channels you selected.

Press teletext red button to storage to channels

after manual tuning .

ATV Manual Tuning

Storage To 1

Syst em BG

Curr ent CH 1

Fine-Tune

Freq uency 4 24.25 M Hz

Save M ENU

5). Program edit:

You can Delete ,Rename ,Move, Skip , FAV any programs.

Press teletext red button , the program in cursor will delete.

Delete

Ren ame:

Only can rename ATV programs .Move the cursor to the program, press teletext green button to rename the program. Press▼▲ to choose the character. Press◀▶to move the cursor.Press MENU button to exit edit , Press EXIT to exit the menu. Note: ATV programs name only can be 5 character.

EN-22

6). CI information: (optional)

This menu can display the CI card' s information.

Use the Arrow Buttons to select the channel you wish to move. Then press the Yellow Button to select Move fun ction. Once ac tive us e the Arr ow Buttons t o move and then press OK to confirm.

Press to choose the program , press teletext blue button to skip this program, The will show on the right side of the program .Choose the skipped program, press blue button again , you can cancel the skip ,The will disappear .

▼▲

Favourite:

Press to choose the program , press FAV button , it will show on the right side of the program.Choose the FAV program , press FAV button again , you can cancel the FAV, the will disappear .

▼▲

Once your favorite group is created, you can press the FAV key to quickly access your favorite channel.

1).Tint is available in NTSC system only.

2).There are four colors temperature modes can be selected medium, warm, cool,user

3).Screen is available in PC mode only which can adjust Horizontal position, vertical position, size and phase.

3.SOUND MENU

The third item of the MENU is the SOUND MENU. You can adjust the sound effect here such as treble, bass, balance etc.

Auto volume: only available when the input signal volume is too large or distortion.

4.TIME MENU

The four th item of the menu is the TIME MENU. You can adjust the clock, power on/off time,sleep timer etc

The second item of the MENU is PICTURE MENU. You can adjust picture effect here, such as contrast, brightness, etc.

2. PICTUREMENU

Operation

Move:

Skip:

Pic ture Mo de Stan dard

Contrast 50

Brightn ess 50

Color 50

Sharpness 50

Tint 50

Col or Tempera ture Me dium

Red 5 8

Gre en 50

Blu e 50

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

Picture Mode

Aspect Ratio Noise Reduction

Screen

Color Temperature

Eco

Mild

User

Standard

BACK MOVE OK

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

Sound Mode

Aut o Volume Surround Sound

Balance

Standard

Music

Theater

Sports

User

BACK MOVE OK

5.OPTION MENU

The fifth item of the MENU is the OPTION MENU. You can adjust the OSD language,Audio language,Subtitle language etc.

Within 15 minutes there is no signal, the TV will auto sleep , if Auto Sleep is set ON. The clock time can get from the DTV system auto.

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

Clock Off Time

Sleep Timer Auto Sleep Time Z one

On Time

BACK MOVE OK

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

OSD Language

Subtitle Language PVR F ile Sys tem

Restore Factory Default Automatic power-down(4h) Home/Shop M ode

DCR

HDM I CEC

Audio Languages

BACK MOVE OK

COAXIAL MODE AD Sw itch

Vivid

EN-23

6.LOCK MENU

The sixth item of the menu is the LOCK MENU. You can lock system, set password, block program and set parental guidance Once you set the lock system on you can not search the channels or change any programs.

The default pass word is 0000, If you forget the password, you can use the super password:9443. Block program: Press

▼▲ to choose the

program ,press teletext green button to block the program. If you want unblock the program, pls enter the main menu , input the password, then press green button again.Parental guidance: Press

◀▶to choose rating.

7.EPG Menu(Electronic Program Guide).

The EPG menu is used to look at what is being broadcasted on DTV or Radio channel in the day. To access the EPG menu, press the , the following menu will be displayed:

GUIDE button

1. Use to choose the programs , Press INFO key, you can display the highlight program's information.

INFO

2. Press the teletext yellow key, It can list all the reminder schedule, press to choose the list, press red key to delete the schedule list.

▼▲

Schedule

DELETE

Sched ule Lis t 04:55 2 8th Apr Delete

Time Date

Programme Title

Channel Name

Restore factory default will clear all the programs and password.

In PV R File syste m menu you can s et up USB

dis k for PVR.

Automatic Power-down

1.I f after 4 hours from switch on and no changes have been made to the TV, for example no channel or volume changes,the TV will start the automatic power down sequence. And pop-up window will appear on screen.

After 150 seconds the TV will automatically switch to standby. To override the automatic shutdown press any button on the remote control.

2. To cancel the automatic power-down On the Option Menu select Automatic power-down(4H) Press le ft/ri ght A pop -up messa ge will a ppear “Are you sure you want to disable automatic powerdown?” Use the left arrow key to select YES The TV screen returns to the Option Menu and the Automatic power-down(4H) option will display. Automa tic power- down( 4H) OFF To return to auto shutdown after 4 hours r epeat the abo ve excep t use t he righ t arrow key to s elect N O.

Seconds to Automatic power-down Please press any Key to Cancel

26/Jan

11: 40

1 TV3

Club/Super3-Naturalmen..

No Information

PROGRAMME GUIDE

Schedule

Record

Info

Reminder

TIME

2 3/2 4

3 TVC HD

INDEX

USB Disk

Time Shi ft Size Speed

Sel ect Dis k C:

Che ck PVR Fi le Syst em Star t

Format

Fre e Recor d Limit 6 H r.

Operation

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

Loc k Syste m

Block Program Parental Guidance

Set P asswo rd

BACK MOVE OK

3. Record Press the red key ,I t can set the program to be recorded.

4. Press the blue key to choose one program and set up one reminder time, the TV screen will skip to the choosed program in the reminder time automatically.

Reminder

1 TV3

37 Mi nute

11 Hou r

Jan M onth

26 Da te

Onc e Mode

Reminder

BACK

EN-24

PVR F ile Sys tem Type H i Speed F S

PVR F ile Sys tem Siz e All

SD 10 4 Mins

HD 29 M ins

Fil e Syste m Size

PVR F ile Sys tem Type FAT32

SD 10 4 Mins

HD 29 M ins

Fil e Syste m Size

Selec t Di sk

USB 0

Disk C:

USB D isk

Time Shi ft Size Speed

Sel ect Dis k C:

Che ck PVR Fi le Syst em Star t

Format

Fre e Recor d Limit 6 H r.

Check PVR File System: check if the PVR File

System set up in the USB device or not.

Format:

Selec t Disk:select which disc to save the

record file.

8.PVR function

Operation

1.P repare to record t he prog ram

PVR function only works in DTV. From O PTION M ENU ent er into PVR File Syste m In “OPTION MENU”, please choose “check PVR File Syst em”. Click “OK”, unti l “checking”change into “Success”. Note: please check the term “speed”. If it is “HD support”, tha t means t he spee d of USB device is available for time shift and record. If not, please format the device, to make sure the device available. The default “Free Record Limit” is 6 hour, if the space on the disk is big enough. If the space is not big enough, the record time should be shorter, depends on the room on the device. During the “check PVR File System” checking, please do not take any other operation until it finished.

The reco rdings mus t be done w ith the T V PVR sys tem. It c an only b e played in th e same TV, not i n any other kind o f devic e (compute r, DVD, e tc.) wh ich is no t compatib le with . TS. f ile format . Please note that in order to carry out any kind of record ing, the TV wi ll require you to form at the connected USB device to store the recording.

WARNING. WHEN YOU FORMAT, THE EXTERNAL USB DEVICE YOU WILL LOSE ALL THE FILES AND INFORMATION YOU HAVE STORAGE ON THE D EVICE.

The U SB file s ystem will l imit th e size of t he storage size. File system : NTFS up t o 2TB FAT32 with up to 192 GB FAT16 with up to 2GB From O PTION M ENU ent er into PVR File System as below:

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

OSD Language

Subtitle Language PVR File System

Restore Factory Default Automatic power-down(4h) Home/Shop M ode

HDM I CEC

DCR

Audio Languages

BACK MOVE OK

EN-25

USB Disk

Time Shift Size

Select Disk C:

Check PVR File System SUCCESS

Format

Pass

All

Spe ed HD Sup port

2730KB/S

Fre e Recor d Limit 6 H r.

USB Disk

Time Shift Size

Select Disk C:

Check PVR File System Checking

Format

Pass

All

Speed

Checking

Fre e Recor d Limit 6 H r.

below menu appear after Format finish:

If you select the “Hi Speed FS ”format mode,

then you can change the time shift size:

Operation

Time S hift Size

Time S hift Di sk Size 5 12 MB

SD 14 M ins

HD 4 Mi ns

2.R ecord the progr am

3.Play the record

As pl aying the DT V s ource, cho ose the c hanne l and c lick “ reco rd”, the reco rd frame wil l pop up. Click ” rec ord” again, th e record fra me will d isapp ear and the “RE C” ico n still o n the lef t top. It w ill dis appea r until you c lick “stop”.

/DVB-S2

●

The p rogram recorded on t he “USB”w ill be saved in t he folder “_MS TPVR” on the device.

1.Th e USB storag e size ca n be betw een 128 MB and 50 0GB in si ze, but fo r practic al use 2G B to 500GB is recommended.

2. Vid eo may becom e pixelated whe n Video bit r ate is too low. This ca n be caus ed by con necti ng a USB extension cable instead of plugging the USB dir ectly i nto the T V

3. No t all USB d evice s are compat ible. Bel ow is a lis t of recomme nded US B drive s. Mod els tha t are not l isted may be c ompatibl e, but it i s not g uaran teed to work . The USB support list are the same as Timeshift function,see the following pages for details.

For mat dis k

Do no t unplu g USB dev ice.

Formatting,please wait

For mat dis k

Sta rt Exit

For mat dis k

Warning! All data wi ll be los t.

(Suggest to format the device by “High Speed Fs...”,

which can speed up the record.)

EN-26

Operation

Ple ase do no t unplu g the USB s torage dev ice whe n the Time Shif t functio n is activated .

Approximately 4GB of memory buffers about offer 140 minutes.

Prepar e to recor d the pro gram

Thi s TV allows you to pa use and r ecord the cur rentl y watched di gital prog ram to a USB storage device, and to resume to the point where it was paused.

Formattin g a USB 2.0 s torag e device wil l be needed. Save your original data before form attin g. All the dat a stored in the U SB devi ce will b e erased after formatting.

USB Drive Storage Format

Select to format the USB device and allocate the amo unt of sp ace for the Time Shi ft functi on.

The form at process w ill tak e at leas t 2 minutes. Please do not turn off the power or remove the USB device during formatting.

Dur ing for matti ng, a speed te st will b e done on the USB device. If it fails, it means the USB device may not support the Time Shift function.

Record a paused DTV program to USB storage device

1. Whi le in the DTV i nput so urce, in sert USB storage device to the USB port on the sid e of your TV.

2. Press Play /Pause 15 to star t Tim e Shift function. The TV program paused. The Time Shift OSD appears, and starts recording.

3. Press S TOP 26 to st op Time Shift function and stop recording program.

9.Timeshift function

EN-27

Operation

Time Shift limitations:

1. Whe n the Time S hift featu re is act ivate d, only the PLAY/PAUSE/STOP/FWD/REV/ VOL+/VOL-/MUTE keys and some basic operation keys ( /EXIT/navigation keys) are available.

2. Video playback may not be smooth and skip if USB recording speed does not meet the minimum requirements .

3. Do N ot remove US B disk or s witch off th e power du ring Tim e Shift o perat ions. I t will abo rt once the s ignal is los t.

4. Do N ot remove th e signal sou rce dur ing Time Shift operations.

5. Do Not quickly and repeatedly change operations between PLAY/PAUSE/FWD/REV.

6. Vid eo may becom e pixelated whe n Video bi t rate is to o low.

7. Not all USB devices are compatible, The USB har d disk dr ive electric ty should b e < 500MA. Bel ow is a lis t of recommended USB drvies. Models that are not listed may be compatible, but i t is not gu aranteed t o work.

8. This feature is not available for all digital TV,such as scrambled or audio only channels.

San D isk Extreme® Cont our™ US B Flash Dri ve - 8GB SD CZ8 - 819 2 - E75

San D isk Extreme® Cont our™ US B Flash Dri ve - 16GB S DCZ8 - 01 6 G - A75

Kin gston D ata Traveler 4 10 USB 2. 0 Flash Dr ive - 16G B DT410/16 GB

Kin gston D ata Traveler 4 10 USB 2. 0 Flash Dr ive-8 GB DT410 /8 GB

OCZ Techno logy ATV U SB 2.0 Flash Dri ve - 8GB OCZUSBATV - 8G B

OCZ Techno logy Ra lly 2 USB 2 .0 Flash Dri ve - 4GB OCZUSBR2DC - 4 GB

OCZ Techno logy Ra lly 2 USB 2 .0 Flash Dri ve - 8GB OCZUSBR2DC - 8 GB

SZMSUNG - Hm5 00 JI -50 0 G

EN-28

Operation

Press so urce key, and s elect USB in source lis t, press OK bu tton to e nter the USB m enu.

10.USB Player

Please make sure that the USB device have plu gged in t he slot .There are four t ype med ia item can be selected, such as photo, music, Movie, and text. Select the type media item by pressing , press OK butto n to enter the disk selection menu.

◀▶

Press the to select the right disk and press OK to display media files and folder list or choose Return to back to the media type selection menu.

◀▶

Select the media file by pressing or , then the p revie w frame will p op up.Pr ess the b utton to play the media file in full screen.When the med ia file ( photo, Movie, o r text ty pe) is pl aying, press the OK or Info button ca n displ ay the co ntrol bar.

◀▶ ▼▲

▶

Press to sel ect the f unction i con, press O K but ton to confi rm the fu nction. Press or E XIT but ton to exit th e control ba r except for mu sic.

You can a djust t he audi o track , or prog ram in th e Info menu while Playing the video file.Choose the Inf o icon an d press OK can d ispla y the Info MEN U.

◀▶

▼

USB p layba ck is sup porte d for the foll owing p hoto file formats:

-JPEG( JPEG fo rmat, f iles wi th the ex tensi on ".jp g" )

-BM P (file s with th e exten sion ".bmp")

-PN G (file s with th e exten sion ".png") USB p layba ck is sup porte d for the foll owing m usic file formats:

-MP 3 (file s with th e exten sion ".mp3") USB p layba ck is sup porte d for the foll owing text file formats:

-TXT (fi les wit h the ext ensio n ". txt")

USB p layba ck is sup porte d for the foll owing m ovie file formats:

-TS (MPEG2 & H.264)

Pause FF Prev. NextFB Stop

Repeat ALL

00:04:22

Set A

play

00:04:22

PHOTO MUSIC TEXT MOVIE

Haier Innovation Life

USB2.0 Back

EXIT

Move Select

Return C

Haier Innovation Life

Back

EXIT

Move Select

Picture

Back

EXIT

Move Select

Return 720 480 1080Up Fol de r 0021.JPG

0021.JPG

SUB-10.avi

Resolution: 720x400

Subtitle:

Programme:

Size: 4142 KBytes

AudioTrack: 1 /1

OFF

--/0

EN-29

+ 214 hidden pages