Haier L26A9AP, L32A9AP, L37A9AP, L40A9AP, L42A9AP Operating Instructions Manual
L26A9AP
L32A9AP
L37A9AP
L40A9AP
L42A9AP
L26A9AP
L32A9AP
L37A9AP
L40A9AP
L42A9AP
LCD COLOUR TELEVISION
OPERATING
INSTRUCTIONS
◆Wide view-angle display, high contrast
◆Nicam
◆Teletext
◆HDMI
01
0090502952
1
CONTENTS
Warning and caution...........................................................................................2
Buttons and interface position............................................................................5
Wall mount switching support assembly instructions.............................................6
Base disassembly/assembly method.........................................................................6
Preparation for remote control..........................................................................7
Remote control panel..........................................................................................8
Basic operation.................................................................................................9
Screen display...................................................................................................10
TV program setting..........................................................................................11
Im age c o nt r ol. ... ... ... . .. . ... ... ... ... ... . .. . ... ... ... ... . .. . .. . ... ... ... ... . .. . ... ... ... ... 14
Audio control...................................................................................................15
Functi on se tting... ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ...16
Time setting...........................................................................................................18
Signal source setting..............................................................................................19
Child lock setting..................................................................................................20
Teletext function.....................................................................................................21
Other setting function... ... ........ ... ........... ........... ........... ... ........ ... ........... .23
External audio and video equipment connection..............................................24
Using your TV as a computer display..............................................................25
Specifications...................................................................................................26
Troubleshooting guide............................................................................................27
2
WARNING AND CAUTION
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.FOR
ANY PROBLEM, REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
THERE IS A LIGHTNING ARROW SYMBOL IN THE TRIANGLE:
THIS SYMBOL INDICATES HIGH VOLTAGE IS PRESENT INSIDE.
IT IS DANGEROUS TO MAKE ANY KIND OF CONTACT WITH ANY
INSIDE PART OF THIS PRODUCT.
THERE IS A EXCLAMATION MARK IN THE TRIANGLE: THIS
SYMBOL ALERTS YOU THAT IMPORTANT LITERATURE
CONCERNING OPERATION AND MAINTENANCE HAS BEEN
INCLUDED WITH THIS PRODUCT.
CAUTION
DO NO T OPENDO NO T OPEN
RIS K OF ELEC TRIC SH OCK RIS K OF ELEC TRIC SH OCK
!!
!!
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK AND FIRE,
DO NOT PUT THE TV SET NEAR SOURCES OF HUMIDITY.
DO NOT USE ANY ABRASIVE CLEANSERS WHICH MAY
SCRATCH OR DAMAGE THE LCD SCREEN. AVOID CONTACT
WITH OBJECTS THAT MAY SCRATCH THE LCD SCREEN.
NOTE: SERVICING THE UNIT YOURSELF IS UNAUTHORIZED
AND COULD LEAD TO INJURY OR PRODUCT DAMAGE.
BUTTONS AND INTERFACE POSITION
5
Back interface
1. Antenna input
2. Earphone output
3. AV output
4. AV input
5. S-VIDEO input
6. YPbPr input
7. VGA audio input interface
8. VGA input
9. HDMI input
10.Power input socket
36810
7
2
1
POWER
9
HDMI
L-AUDIO-R
5
4
-
L R
AV IN
L R
AV OUT
Front control panel
L26A9AP/L32A9AP
L37A9AP/L40A9AP/L42A9AP
Power button
Program down/up button
Volume down/up button
TV/AV switch button
Menu button
CH-
TV/AV
MENU
CH+
VOL-
VOL+
Power indicator
Remote sensor
CH-
TV/AV
MENU
CH+
VOL-
VOL+
Power indicator
Remote sensor
Power button
Program down/up button
Volume down/up button
TV/AV switch button
Menu button
CH-TV/AV
MENU
CH+
VOL- VOL+
6
WALL MOUNT SWITCHING SUPPORT ASSEMBLY INSTRUCTIONS
(1) In order not to scratch the
TV set, it is recommended
putting the TV set with face
down on the soft and clean
blanket.
(2)Disassemble the six screws
from base and remove the
base. (This item will be
cancelled if the product is
without base.)
(3)Mount the airproof board.
(4)Take out the switching
support from the accessory
bag, and use four M5×16
screws (included in the
Base
Switching support
Switching support
Airproof board
accessory bag) to fix the switching support on the back of complete set.
(5)The remaining four M5×16 screws in the accessory bag are used to mount the wall
mount parts.(The wall mount parts are in the wall mount box.)
(6)After completing the above operations, the complete set can be mounted on the wall
mount bracket.(Wall mount bracket operations refer to the assembly instructions of it.)
Note: 1. The arrow indicates the position of screw.
2. This operation is only used before mounting the bracket.
3. Wall mount bracket is additional purchase.
(1)As figure, removing the four M4×20 screws, the base
will be disassembled.
(2)As figure, mounting the four M4×20 screws, the base
will be assembled.
Note:
The arrow indicates the position of screw.
The position to strike the screw.
BASE DISASSEMBLY/ASSEMBLY METHOD
L26A9AP/L32A9AP
L37A9AP/L40A9AP/L42A9AP
7
PREPARATION FOR REMOTE CONTROL
3
2
1
++
Remote control installation
1. According to the figure display below, place the remote control with face down,
then open the cover of battery apartment.
2. As in the figure display below, install two AA batteries. (The + and - symbol of
battery must match with the marks on the remote).
3.Close the cover of battery apartment.
Cautions for using remote control:
Confirm there is no object between the
remote control and the remote sensor
of TV set.
Sunshine or other strong light will
interfere the signal sent by the remote
control. In this situation turn the TV
set to avoid the direct light source.
Do not put the remote control in direct
heat or a damp place, or potential
damage to the remote may occur.
Please use two AA 1.5V batteries.
Do not mix battery types.
Install the batteries as the correct
polarities.
Do not use rechargeable batteries.
8
REMOTE CONTROL PANEL
1
2
3
4
7
8
9
11
12
13
14
15
16
17
18
10
5
6
11
Power button
Mute button
Still button
Display button
This function is not available
Sleep timer button
Scan button
Nicam button
One digit selection button
Swap button
TV/AV selection button
Picture mode selection button
Sound mode selection button
Program up/down button, direction
selection button
Volume up/down button, direction
selection button
Menu call/selection button
Teletext buttons
Fast text coloured buttons
Buttons and Descriptions
5
8
9
10
1 2 3
4
5
6
7
8 9
0
↓
1
3
7
2
6
4
SLEEP
PIP
18
17
16
15
14
13
12
11
MUTE
STILL
I/II
SCAN
DISPLAY
TV/AV
P.STD
SWAP
S.STD
CH+
CH-
VOL-
VOL+
MENU
H.LOCK
EXITCH.LIST
TIMER
ZOOM
??
- - - -
↑
←
→
←
Loading...