How it Works
Haier
Loading...
L37A9A-AK
Owner's Manual
19 pgs3.3 Mb0

Haier L26A9A, L32A1A, L32A9A, L37A9A-A, L37A9A-AK Owner's Manual

01 0090506952C
Please read this manual carefully before operating the unit, and keep it for future reference.
TFT-LCD COLOUR TELEVISION RECEIVER
OWNER'S MANUAL
1
CONTENTS
2
WARNING AND CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.FOR ANY PROBLEM, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THERE IS A LIGHTNING ARROW SYMBOL IN THE TRIANGLE: THIS SYMBOL INDICATES HIGH VOLTAGE IS PRESENT INSIDE. IT IS DANGEROUS TO MAKE ANY KIND OF CONTACT WITH ANY INSIDE PART OF THIS PRODUCT. THERE IS A EXCALMATION MARK IN THE TRIANGLE: THIS SYMBOL ALERTS YOU THAT IMPORTANT LITERATURE CONCERNING. OPERATION AND MAINTENANCE HAS BEEN INCLUDED WITH THIS PRODUCT.
CAUTION
DO NOT OPENDO NOT OPEN
RISK OF ELECTRIC SHOCK RISK OF ELECTRIC SHOCK
!!
!!
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK AND FIRE, DO NOT PUT THE TV SET NEAR SOURCES OF HUMIDITY. DO NOT USE ANY ABRASIVE CLEANSERS WHICH MAY SCRATCH OR DAMAGE THE LCD SCREEN. AVOID CONTACT WITH OBJECTS THAT MAY SCRATCH THE LCD SCREEN.
NOTE: SERVICING THE UNIT YOURSELF IS UNAUTHORIZED AND COULD LEAD TO INJURY OR PRODUCT DAMAGE.
Warning and caution...........................................................................................2
Buttons and interface position............................................................................5
Front control panel.........................................................................................5
Back interface.................................................................................................6
Side
Preparation for remote control..........................................................................7
Remote control panel..........................................................................................8
Basic operation.................................................................................................9
Power on/off TV............................................................................................9
TV program selection and volume adjustment..............................................9
Recall............................................................................................................9
Mute function................................................................................................9
OSD language selection.................................................................................9
Screen display...................................................................................................10
TV program setting..........................................................................................11
Auto search...................................................................................................11
Manual search...............................................................................................11
Fine tune.......................................................................................................12
Skip...............................................................................................................12
Exchange.......................................................................................................13
Image control....................................................................................................13
Set your favourite picture mode....................................................................13
Noise reduce..................................................................................................13
Picture mode /sound mode selection.............................................................14
Sound control...................................................................................................14
Sound effect control......................................................................................14
System setting function....................................................................................14
OSD background setting...............................................................................14
Signal source setting......................................................................................15
Screen display picture zoom setting..............................................................15
Other setting function.......................................................................................15
Sleep timer setting.........................................................................................15
PIP setting......................................................................................................16
Sound source setting......................................................................................16
Color temperature..........................................................................................17
Digital filter setting........................................................................................17
AAA setting...................................................................................................17
H-POSITION/ V-POSITON/DURATION.........................................................18
Color and time on/of setting.........................................................................18
CHILD LOCK...............................................................................................19
Steram Media Broadcast System.................................................................20
External audio and video equipment connection..............................................28
Specifications...................................................................................................32
Trouble shooting guide.......................................................................................33
interface..................................................................................................6
WARNING AND CAUTION
Please ensure that the set has adequate ventilation.
Do not put the unit near water or oil as it may cause a fire.
During thunderstorms, unplug both the antenna and power plug to prevent damage.
Do not use a damaged power plug or put the power supply wire near a heat source as it may cause electric shock or fire.
To prevent potential fire, do not overload an electrical outlet with too many plugs.
Place the set on a level surface to prevent it from tipping and potential damage.
Do not remove the cover of the set or try to service. This may result in electric shock or fire. All service work must be completed by an authorized technician.
Do not place the power adapter near a heat source or it may cause a fire.
If there are any abnormal sounds or smells from the unit, unplug immediately and contact an authorized service provider.
3
WARNING AND CAUTION
4
To prevent fire, do not use or store any flammable materials near the unit.
To prevent fire, do not place the unit near a damp wall.
To prevent electric shock, ensure that any external antenna connected to the set is clear of contact with any power lines.
Do not plug / unplug the unit while your hands are wet. This may cause an electric shock.
Please ensure a solid connection with the AC wall socket in order to avoid shock and potential fire.
To prevent electric shock or fire, please note to prevent rain from entering the set along the wire connected to the outside antenna.
When cleaning, please unplug the unit. Use a soft cotton cloth. Do not use any abrasive cleansers, and prevent water from entering the set.
If any plugs or input wires are dirty, unplug the set and clean. This will prevent risk of electric shock or fire.
If the set is not going to be used for an extended period, unplug the unit from the AC wall outlet.
Do not place the set near a heat source or in direct sunlight.
BUTTONS AND INTERFACE POSITION
5
Front control panel
6
1.
2.
3.
4.
5.
6.
7.
Menu button TV/AV switch button Program down/up button/item down/up selected Volume down/up button/item left/right selected and enter Power button Power indicator Remote sensor
1
MENU
P-
P+
TV/AV
V-
V+
POWER
2 3
4
5
MENU TV/AV
P- P+ V- V+
POWER
1 2 3 4 5 67
YUV
L
R
D-SUB IN
YUV IN
HDMI
AUDIO IN
V
AV OUT AUDIO OUT
L
R
YUV AUDIOIN
S-VIDEO IN
L
R
V
L
R
V
AV2 AUDIO2 IN
AV1 AUDIO1 IN
ANT
AC IN
Back panel
L37A9A-AK
Side panel
USB1
USB2
USB1 jack
USB2 jack
VGA
VGA
AUDIO IN
Y Pb/Cb Pr/Cr
YPb/CbPr/Cr L-IN R-IN
V-OUT L-OUT R-OUT
S-
VIDEO
AV2 L R
AV1 L R
ANT
POWER
L26A9A-A/L32A9A-A/L32A1A-A
HDMI IN
1 VGA input 2 VGA audio input 3 Component video input 4 VIDEO/AUDIO output 5 Component/S-VIDEO audio input 6 S-VIDEO input 7 VIDEO/AUDIO input1 8 VIDEO/AUDEO input2 9 Antenna input 10 Power cord socket 11 Power switch Please according to the real set 12 HDMIVIDEO and AUDIO input
BUTTONS AND INTERFACE POSITION
7
PREPARATION FOR REMOTE CONTROL
3
2
1
++
Remote control installation
1. According to the figure display below, place the remote control with face down, then open the cover of battery apartment.
2. As in the figure display below, install two AA batteries. (The + and - symbol of battery must match with the marks on the remote).
3.Close the cover of battery apartment.
Cautions for using remote control Confirm there is no object between the remote control and the remote sensor of TV set.
Sunshine or other strong light will interfere the signal sent by the remote control. In this situation turn the TV set to avoid the direct light source.
Do not put the remote control in direct heat or a damp place, or potential damage to the remote may occur.
Please use two AA 1.5V batteries. Do not mix battery types. Install the batteries as the correct polarities. Do not use the rechargeable batteries.
9
REMOTE CONTROL PANEL
Power button Mute button TV/AV switch button Display button Dynamic AAA HDTV on/off button PIP function on/off button PIP main/sub picture switch button PIP sound selection button Digital selection button Program recall button Child lock button Picture mode selection button Sound mode selection button Program up/down button, direction selection button Volume up/down button, direction selection button Menu call/exit button Color system selection button Sound system selection button Program scan button Picture still button Picture size selection button Sleep timer button This function is not available This function is not available
main/sub
Buttons and Descriptions
8
BASIC OPERATION
1. If the TV set is in standby status, press power switch on the remote control or TV set (or CH+/-/P+/­ on the remote control)can cancel the standby status, then enter the power on status.
2. Press power switch on the remote control or the TV set again, the TV set will enter standby status.
Standby set: first connect the power supply wire, then turn the power switch on the back of TV set on(if there is a power switch button).
TV PROGRAM SELECTION AND VOLUME ADJUSTMENT
You can use CH+/- button or direct-digit choosing button to select the TV channel number. Press VOL+/- button to adjust the volume.
RECALL Pressing RECALL button can switch the channel to the
last channel you watched.
MUTE FUNCTION
1. Press MUTE button to shut off the TV sound, the screen displays mute mark.
2. Press MUTE button again or VOL+ button to restore the sound.
OSD LANGUAGE SELECTION
Select the LANGUAGE item in the menu
1. Press MENU and CH+/- button to select OSD setting menu.
2. Press VOL+/- to enter and CH+/- button to select LANGUAGE item.
3. Press VOL+/- button to select the language you need.
OSD
MOVE SELECT MENU EXIT
MUTE
TV/AV
SOUND
POWER
MAIN/SUB
PIP
AAA
DISPLAY
POWER ON/OFF TV
LANGUAGE ENGLISH H-POSITION V-POSITION DURATION TRANSPARENCY
S.STD
CHILDLOCK
RECALL
CH+
P.STD
C.SYS
S.SYS
MENU
CH-
VOL-
VOL+
ZOOM
BACK
SIZE
STILL
=
SLEEP
SCAN
SOUND
MAIN/SUB
PIP
DISPLAY
TV/AV
AAA
MUTE
POWER
I-II
17/18/19/20/21/24/26/27/29/30 buttons are for the multi-media ,reference to the instruction following.
The USB multi-media is only for the model L37A9A-AK.
Loading...
+ 13 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use