CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.FOR
ANY PROBLEM, REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
THERE IS A LIGHTNING ARROW SYMBOL IN THE TRIANGLE:
THIS SYMBOL INDICATES HIGH VOLTAGE IS PRESENT INSIDE.
IT IS DANGEROUS TO MAKE ANY KIND OF CONTACT WITH ANY
INSIDE PART OF THIS PRODUCT.
THERE IS A EXCLAMATION MARK IN THE TRIANGLE: THIS
SYMBOL ALERTS YOU THAT IMPORTANT LITERATURE
CONCERNING OPERATION AND MAINTENANCE HAS BEEN
INCLUDED WITH THIS PRODUCT.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK AND FIRE,
DO NOT PUT THE TV SET NEAR SOURCES OF HUMIDITY.
DO NOT USE ANY ABRASIVE CLEANSERS WHICH MAY
SCRATCH OR DAMAGE THE LCD SCREEN. AVOID CONTACT
WITH OBJECTS THAT MAY SCRATCH THE LCD SCREEN.
RIS K OF ELEC TRIC SH OCK RIS K OF ELEC TRIC SH OCK
DO NO T OPE NDO NO T OPE N
1
!!
NOTE: SERVICING THE UNIT YOURSELF IS UNAUTHORIZED
AND COULD LEAD TO INJURY OR PRODUCT DAMAGE.
2
BUTTONS AND INTERFACE POSITION
PREPARATION FOR REMOTE CONTROL
Front control panel
L26TA5A/L32TA5A/L37TA5A
VID EO
R
AUD IO
L
Power indicator
Remote sensor
L26TA6A/L32TA6A/L37TA6A
VID EO
R
AUD IO
L
Remote sensor
Power indicator
POWER
HDMI
MEN U
TV/ AV
CH-
CH+
VOL -
VOL +
Menu button
TV/AV switch button
Program down/up button
Volume down/up button
1. According to the figure display below, place the remote control with face down,
then open the cover of battery apartment.
2. As in the figure display below, install two AAA batteries. (The + and - symbol of
battery must match with the marks on the remote).
3.Close the cover of battery apartment.
1
2
3
Power button
Remote control installation
++
MEN U
TV/ AV
CH-
CH+
VOL -
VOL +
Menu button
TV/AV switch button
Program down/up button
Volume down/up button
Cautions for using remote control:
Confirm there is no object between the
remote control and the remote sensor
of TV set.
Sunshine or other strong light will
interfere the signal sent by the remote
control. In this situation turn the TV
set to avoid the direct light source.
Power button
L-AUDIO-R
-
SCART1SCART2
9
7
6810
5
2
3
14
1. Antenna input
2. Earphone output
3. SCART2 input
4. SCART1 input
5. S-VIDEO input
6. YPbPr input
7. VGA audio input interface
8. VGA input
9. HDMI input
10.Power input socket
Note: 1. AV and SCART2 can’t be used at the same time.
2. When SCART1 and SCART2 is input at the same time, SCART2 is prior.
3.When the analog menu appear, can be used as CH+,CH-,VOL+ or VOL separately.
5
Do not put the remote control in direct
heat or a damp place, or potential
damage to the remote may occur.
Please use two AAA 1.5V batteries.
Do not mix battery types.
Install the batteries as the correct
polarities.
Do not use rechargeable batteries.
6
REMOTE CONTROL PANEL
BASIC OPERATION
STANDBYSTANDBY
1
3
2
6
7
8
10
11
9
15
16
19
17
18
20
25
27
29
30
4
5
12
13
14
23
24
21
26
22
28
31
Buttons and Descriptions
Standby button
1
2
Mute button
3
Picture mode button
4
Sound mode button
5
Light button
6
Teletext button
7
TV/AV button
8
Fast text coloured buttons
9
TV/DTV mode button
10
TV channel list button
11
DTV channel list button
12
Scan button
11
Electronic program guide button
13
14
Picture still button
Confirmation button
15
(it is the same function as the SELECT
button in the DTV mode)
16
Allows you to navigate the onscreen menus and adjust the system
settings to your preference
17
Show/hide information banner
(it is the same function as the i
button in the DTV mode)
18
Display button
19
Open/Close current language sub menu
20
Nicam button
21
Subtitles on/off
Sleep button
22
Close current DTV menu
23
24
Exit button
25
TV menu button
26
DTV menu button
27
Volume up/down button
28
Program up/down button
29
Number buttons
Zoom button
30
31
Recall button
STANDBYSTANDBY
LANGUAGE ENGLISH
BLUE SCREEN OFF
OSD SETTING
IMAGE POSITION
ADVANCE
TXT LANGUAGE WEST
FUNCTION
SWITCHING ON/OFF THE TV SET
1.first, connect power cord correctly and the power
indicator will light .
2.If the indicator is shown illuminated in red, press
the digit buttons or CH+/- button on the remote
control or or CH+/- button on the TV set.(
with the exception 0 digit)
3.If you want to exchange to standby status,
please press button on the remote control.
4.Disconnect the power supply or unplug the
television if it is intended to completely cease
the television performance.
TV PROGRAM SELECTION AND VOLUME
ADJUSTMENT
You can use CH+/- button or digit buttons to select the
TV channel number.
Press VOL+/- button to adjust the volume.
RECALL
Pressing RECALL button can switch the channel to the
last channel you watched.
MUTE FUNCTION
1. Press MUTE button to shut off the TV sound, the
screen displays mute mark.
2. Press MUTE button again or VOL+ button to turn
on the TV sound.
OSD LANGUAGE SELECTION
Select the LANGUAGE item in the menu.
1.Press MENU button to make the main menu display.
2.Press button to select FUNCTION menu. Press
button to enter.
3. Press button to select LANGUAGE item.
4. Press button to select the language you need.
7
8
SCREEN DISPLAY
TV PROGRAM SETTING
For your convenient operation and in order to know the TV set, we offer the below
menus.
Picture setting menu
VIDEO MODE SOFT
CONTRAST 45
BRIGHTNESS 45
SATURATION 45
SHARPNESS 50
COLOUR TEM. NORMAL
ZOOM FULL
PICTUREPICTURE
Audio setting menu
AUDIO MODE STANDARD
BALANCE 50
AUTO VOLUME ON
EQUALIZER
SURROUND OFF
DIGITAL BASS ON
AUDIO
Tuning setting menu
PROGRAM NUMB. 11
COLOUR SYS. PAL
SOUND SYS. D/K
FINE TUNE
MANUAL SEARCH
AUTO SEARCH
EDIT PROGRAM
COUNTRY CHINA
TUNING
Timer setting menu
SLEEP TIMER OFF
CLOCK - - : - OFF TIME - - : - REMIND TIME - - : - REMIND PROG. OFF
TIMER
Function setting menu
LANGUAGE ENGLISH
BLUE SCREEN OFF
OSD SETTING
IMAGE POSITION
ADVANCE
TXT LANGUAGE WEST
FUNCTION
Operation instructions
The real display may be different from the above menus. If you need adjust, please do as
follows:
1.Press MENU button to open the menu, press button to select every menu
separately, then press button to enter.
2.Press button to select the item needs adjust.
3.Press button to adjust the selected item, or enter the next menu.
4.Press MENU button to return the last menu or exit the screen menu display.
Note: “press button to select the menu” operation in the user’s manual, please
refer to these operation instructions.
9
PROGRAM NUMB. 11
COLOUR SYS. PAL
SOUND SYS. D/K
FINE TUNE
MANUAL SEARCH
AUTO SEARCH
EDIT PROGRAM
COUNTRY CHINA
TUNING
AUTO SEARCH
PROGRAM NUMB. 11
COLOUR SYS. PAL
SOUND SYS. D/K
FINE TUNE
MANUAL SEARCH
AUTO SEARCH
EDIT PROGRAM
COUNTRY CHINA
TUNING
MANUAL SEARCH
PROGRAM NUMB. 11
COLOUR SYS. PAL
SOUND SYS. D/K
FINE TUNE
MANUAL SEARCH
AUTO SEARCH
EDIT PROGRAM
COUNTRY CHINA
TUNING
FINE TUNE
55
71.68
55
71.68
55.25
AUTO SEARCH
Using AUTO SEARCH can search all receiving
programs. We recommend using auto search to
search the program when you use this TV set for
the first time.
1.Press MENU button to make the main menu display.
2.Press button to select TUNING menu, press
button to enter.
3.Press button to select AUTO SEARCH item.
4.Press button to start searching, press MENU
button to stop auto search during searching.
Note: The order of the auto scan is due to the
frequency of the program, generally speaking,
it is used only at the first time you search the
program, and once the order of the program has
been confirmed, you don’t have to use this
function, otherwise the order of the program
will be changed.
MANUAL SEARCH
Manual search can search and order the program freely.
1.Press MENU button to make the main menu display.
2.Press button to select TUNING menu, press
button to enter.
3. Press button to select MANUAL SEARCH item,
4. Press button to start searching, pressing
button is used to search the higher frequency
channel, pressing button is used to search the
lower frequency channel, when you have searched
a program, the searching will stop automatically.
You can press button to go on searching or
press MENU button to exit.
Note: During searching, it may appear black screen
because of change of signal, it is normal, it will
recover after finishing searching.
FINE TUNE
When you can’t get a satisfactory picture effect,
you can fine tune to improve the picture.
1.Press MENU button to make the main menu display.
2.Press button select TUNING menu, press
button to enter.
3. Press button to select FINE TUNE item.
4. Press button to start fine tune until you
obtain the best picture and sound, then release
the button and press MENU button to exit.
10
Loading...
+ 11 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.