Haier L32A9-AKF, L32A9 -AK User Manual

Download

TFT-LCD COLOUR TELEVISION RECEIVER

OWNER'S MANUAL

This User's Manual is applicable for the following models: L32A9-AK,L32A9-AK,L32A9 -AK,L32A9-AKF

Please read this manual carefully before operating the unit, and keep it for future reference.

Congratulations on your purchase, and welcome to the family !

Dear Haier product owner:

Thank you for your confidence in Haier. You`ve selected one of the best-built, best-backed products available today. We`ll do everything in our power to keep you happy with your purchase for many years to come. As a member of the Haier family, you`re entitled to protection by one of the most comprehensive warranties and outstanding service networks in the industry.

thanks for investing in a Haier product.

CONTENT

BEFORE OPERATING

Warning.................................................................................................................1

Important Safety Instructions................................................................................2

Buttons and interface location............................................................................. 4

Remote controller.................................................................................................6

Remote controller key function.............................................................................7

Effective range of remote controller......................................................................8

External equipment connections..........................................................................9

BASIC OPERATING

Switching on/off the TV set................................................................................ 14

Select input modes ........................................................................................... 15

Searching channel............................................................................................ 16

Watching TV program........................................................................................18

Picture control functions.................................................................................. .21

Sound control functions.....................................................................................23

Time functions....................................................................................................26

Function menu...................................................................................................28

Adjust menu.......................................................................................................29

Lock setup.........................................................................................................32

OTHERS

Others functions................................................................................................35

Stream media broadcast system.......................................................................37

Specifications and functions..............................................................................47

Maintenance

Troubleshooting.................................................................................................49

......................................................................................................48

Warning

WARNING

RISK OF ELECTRIC SHOCK DO NOT OPEN

WARNING

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

*To avoid electric hazards, it is strongly suggested that the back cover not be opened, as

there is no any accessory inside the casing.

*If necessary, please contact authorized after-sales services.

*A lighting flash mark in a triangle: A potentially hazardous situation, which, if not avoided,

could result in serious injury by high voltage.

*An exclamation mark in a triangle: Major part or accessory of which technical specifications

must be followed if it is to be replaced.

Warning:

To avoid fire or electric hazards, never place your television receiver in an area with heavy moisture. Attention should be paid to avoid accidental scratches or impacts onto the LCD screen.

Caution:

Please read this manual carefully before using your television and keep this

manual in a good place for future reference.

To achieve the best performance of your television, read this User's Manual

carefully and properly store it for future reference.

Information of screen displays and figures in the User's Manual may vary due

to technical innovations.

Caution:

Unauthorized disassembly of this product is prohibited.

Important Safety Instructions

The product should be tightly fixed to avoid drop damages and even fire.

Do not locate the product close to water or oil, which may cause fire hazards.

Do not use damaged or worn electric plugs and keep electric cord away from heat sources to avoid electric shocks or fire hazards.

To avoid fire hazards, do not use this product under direct sunlight or closely to heat sources.

Unplug the power supply and antenna of the product when there is a rainstorm, especially Thunderstorm.

Do not connect excessive sockets in parallel or share the same socket by multiple plugs to avoid fire hazards.

The product must be placed on a solid and stable surface to avoid collapse.

Keep the product away from a transformer or heat source to avoid fire hazards.

Unauthorized disassembly of the television is prohibited to avoid electric shocks or fire hazards. Contact authorized after-sales service if technical service is needed.

Disconnect the product from power supply and contact authorized after-sales service if abnormal sound is heard in the product.

Buttons and interface location

- This is a simplified representation of front panel.

- Here shown may be somewhat different from your TV.

Front panel Control

- CH + - VOL +

TV/AV MENU POWER

Buttons and functions

1 CH-/+ :

2 VOL-/+ :

3 TV/AV: :TV-VIDEO-SIDE VIDEO-S VIDEO-YUV-

USB-VGA-DVI

4 MENU:

Power on/off and indicator: in red when standby mode, in blue when display.

6 POWER : AC power on/off

Remote control signal receive window

8 Multi-media input

program minus and plus , menu options

volume decrease and increase , menu reset and entry

all input source select

menu display

Buttons and interface location

Rear panel Control

Power Cord Socket

This TV operates on AC power.

The voltage is indicated on

the specifications page.

Never attempt to operate the

TV on DC power

EXT Subwoofer:

Subwoofer audio output terminal.

POWER

WOOFER

VGAIN

VGA

DVD/DTV Input (Component )

Connect a component video/audiodevice to these jacks.

Pr/Cr Pb/Cb Y L-AUDIO-R

Connects the video signal

from a video device.

AUDIO Input

VIDEO Input

connect to hear

stereo sound from an

external device.

USB Socket

Video/Audio output terminal

Connect ordinary video/audio or other appliance audio input terminals.

DVIIN

AUDIOAUDIO

VIDEO

OUT

L-AUDIO-R

OUT

Antenna Input

Connect cable or antenna signals to the TV, either directly or through your cable box.

S-VIDEO

VIDEO

L-AUDIO-R

VIDEO

AUDIO

ANTIN

VGA Input

Connect the monitor

output connector from

a PC to the jack

for linking PC or

other appliance audio

frequency output terminals.

Connect the monitor output

connector from a PC to the

Audio input

DVI Input

appropriate input port.

Audio input

for linking DVI or

other appliance audio

frequency output terminals.

Audio/Video Input S-Video Input

Connect audio/video or S-Video out from an audio/video or S-Video device to these jacks.

Earphone jack

Earphone Audio output terminal

Remote controller

Battery loading

1.Slide open the cover of the battery compartment on the back of the remote controller.

2.Load two 7# (AAA)alkaline batteries in the compartment. (plus and minus poles to respective mark)

3.Replace the cover of the battery compartment.

Precautions

As strong light may interfere the signals, change your position to operate the remote controller if the television cannot be turned on or off as you expect.

Keep the remote controller away from heat source or humid area to ensure effective performance of the remote controller.

Make sure that two AAA alkaline batteries are loaded. The batteries must be of the same type. The batteries must be located properly. The batteries are not rechargeable.

Make sure that there is no obstacle between the remote controller and television set.

Remote controller key function

The remote controller cannot be operated unless the batteries are properly loaded.

DISPLAY

STILL

MUTE

S-VIDEO

TV/AV

VOL-

PSM

78 9

-/-- 0

PIP SWAP SCAN

SHUTTLE

SLEEP

Note: The function just takes the remote control for example in this manual P+/-(CH+/-),V+/-(VOL+/-),MENU,TV/AV and POWER on TV panel are corresponding with the CH+/-,VOL+/-,MENU,TV/AV and POWER keys.

CH+

CH-

I/II

DVD/DTV

ZOOM/MOVE

H.LOCK

ZOOM

POWER

PIC.SIZE

PC/DVI

Q.VIEW

VOL+

CH.EDIT

TIME SKIP

USB

RETURN

HELPENTER

The cover of the multi-media keys press down to the appropriate position

1.DISPLAY: Display the current info

2. POWER: Press to turn on the TV from standby mode. Press again to switch off the TV to standby mode.

3.STILL: Press it to freeze-frame the current screen press again to continue playing(never see the still picture for long time, it would burn-in the screen)

4. / : Nicam selection in the signal No available)

5. MUTE: Press this button to mute the sound. Press again to reactivate the sound. Sound also reactivated if the power is turned off then on or if press VOL+ button.

6. PIC.SIZE: Press to select the display the size of the screen(never see the 4:3 picture for long time, it would burn-in the screen)

7. S-VIDEO: Press it to select S terminal input.

8. DVD/DTV: Select YUV input

9. TV/AV : Press this key to select the sources

10. PC/DVI: Press it to select inputs as follows: TV-VGA-DVI-TV

11. OK: Press to confirm

12. Q.VIEW: Back to the last channel

13. CH+/-: Select the option up and down in menu or select channels when there is no OSD.

14. MENU: Press to display or exit the menu

15. VOL+/-: Left and right orientation in menu option or adjust the volume when there is no OSD.

16. PSM: Press to select the picture mode

17. : Press to select the sound mode

SSM

18. Number key: Press to select the channel number

19. No available

20. ZOOM/MOVE: PIP moving(No available)

21. PIP: No available

22. SCAN: Scan all preconcerted channel program

23.SWAP: Switch the input signal of the PIP and the main picture(No available)

24. CH.EDIT: Press to display the stored channel diagram(No available)

25. SLEEP: Can be used to set time to change the TV into the standby status after a period of preset time.

26.H.LOCK button

27.SHUTTLE button

28.Time skip button

29. Only for the multi-media ,reference to the instruction following.

Effective range of remote controller

Effective range

above

below

left

front 8m

DISPLAY

I/II

STILL

MUTE

S-VIDEO

DVD/DTV

TV/AV

CH+

VOL-

VOL+

CH-

PSM

789

ZOOM/MOVE

-/-- 0

PIP SWAPSCAN

H.LOCK

SHUTTLE

SLEEP

ZOOM

right

POWER

PIC.SIZE

PC/DVI

Q.VIEW

CH.EDIT

TIME.SKIP

USB

RETURN

HELPENTER

Ensure the remote controller is pointed toward the remote controller

windows on the display.

No obstacles should be placed between the remote controller and the

remote controller window.

The effective receiving scope for the signal is 8 meters to the front of

the remote controller windows, and 45 to the left or right side and 20

above or below the control windows.

Use of remote controller:

1. To ensure a normal operation, the remote controller should not be

dropped or damaged in any way . It should also be kept dry and away from all heat sources.

2. Battery replacement is necessary when the remote controller acts

inconsistently or stops operating the display.

External Equipment Connections

- Antenna or Cable Service without a Cable Box Connections

- For optimum picture quality, adjust antenna direction if needed.

outdoor antenna

Antenna input

75 standard

coaxial type

ANT IN

300 twin-lead cable

Antenna adapter

Note

* It is recommended that you'd better use 75

disturbance caused by airwave.

* Don't bind antenna cable and electric wire together.

To improve picture quality in a poor signal area, purchase

ANT IN

and install a signal amplifier.

If the antenna needs to be split for two Tv`s, install a 2-

WaySignal Splitter in the connections.

If the antenna is not installed properly, contact your dealer

for assistance.

coaxial cable to remove the

75 coaxial cable

Plug (additional purchase)

External Equipment Connections

DVD setup

How to connect

1. Connect the DVD video outputs (Y, Pb/Cb,

Pr/Cr) to the COMPONENT (Y, Pb/Cb, Pr/Cr) INPUT jacks on the TV and connect the DVD audio outputs to the AUDIO INPUT jacks on the TV, as shown in the figure.

2. If your DVD only has an S-Video output

jack, connect this to the S-VIDEO input on the TV and Connect the DVD audio outputs to the AV IN jacks on the TV, as shown in the figure.

NOTE: If your DVD player does not have component video output, use S-Video.

How to use

1. Turn on the DVD player, insert a DVD.

2. Use the S-Video button on the remote

control to select S-VIDEO mode.

3. Press Play button on external equipment

for program play.

4. Refer to the DVD player's manual for

operating instructions.

Pr/Cr Pb/Cb Y

AUDIO

IN IN IN IN

DVD

VIDEO

S-VIDEO

AUDIO

DTV setup

-To watch digitally broadcast programs, purchase and connect a digital set-top box.

How to connect

Use the TV`s COMPONENT (Y, Pb/Cb, Pr/Cr) INPUT jacks, VGA or DVI port for video connections, depending on your settop box connections available. Then, make the corresponding audio connections.

How to use

1. Turn on the digital set-top box. (Refer to

the owner`s manual for the digital set-top box.)

2. Use PC/DVI on the remote control to

select PC or DVI (Y, Pb/Cb, Pr/Cr) mode.

3. Press Play button on external

equipment for program play.

VGA IN

AUDIO

VGA Pr/Cr Pb/Cb Y

RGB-DTV OUTPUT R AUDEO L

AUDIO

YPbPr

Digital Set-top Box

R AUDEO

DVI IN

DVI-DTV OUTPUT R AUDEO L

AUDIO

External Equipment Connections

PC setup

How to connect

1. Use the TV`s VGA IN or DVI (Digital Visual Interface) IN port for video connections, depending on

your PC connector.

If the graphic card on the PC does not output analog and digital RGB simultaneously, connect only

one of either VGA IN or DVI INPUT to display the PC on the TV.

If the graphic card on the PC does output analog and digital RGB simultaneously, set the TV to either

VGA or DVI; (the other mode is set to Plug and Play automatically by the TV.)

2. Then, make the corresponding audio connection. If using a sound card, adjust the PC sound as

required.

How to use

1. Turn on the PC and the TV.

2. Turn on the display by pressing the POWER button on the TV's remote control.

3. Use PC/DVI on the remote control to select PC or DVI source.

4. Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in PC mode. If noise is present, change the PC mode to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card.

NOTES:

1 Use a DVI cable. 2 Avoid keeping a fixed image on the TV's screen for a long period of time. The fixed image may become permanently imprinted on the screen. 3 The synchronization input form for Horizontal and Vertical frequencies is separate.

VGA IN

AUDIO

VGA

DVI IN

AUDIO

External Equipment Connections

Connect Woofer

1. Take the woofer out, and place it the hind rind. (See picture)

Connect cable to the woofer terminal and

LCD TV terminal, and insert the connecting cable into the terminal slot.

External Equipment Connections

Connecting Headphones

You can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the room.

Plug a set of headphones into the 3.5mm mini-jack socket on the rear panel of the set.

ANT IN

Note

Prolonged use of headphones at a high volume

may damage your hearing.

You will not receive sound from the speakers

when you connect headphones to the system.

Power source

Wider Hole and Blade

Polarized AC Cord Plug

AC Outlet

TO USE AC POWER SOURCE

Use the AC polarized line cord provided for operation on AC. Insert the AC cord plug into a standard polarized AC outlet.

NOTES:

Never connect the AC line cord plug to other than the specified voltage. Use the attached power cord only.

If the polarized AC cord does not fit into a nonpolarized AC outlet, do not attempt to file or cut the blade. It is the user`s responsibility to have an electrician replace the obsolete outlet.

If you cause a static discharge when touching the unit and the unit fails to function, simply unplug the unit from the AC outlet and plug it back in. The unit should return to normal operation. Polarized AC Cord Plug.

Switching ON/OFF the TV set

In the manual, the OSD (on screen display) may be different from your TV`s because it is just an example to help you with the TV operation.

Power ON/OFF

Switching ON/OFF the TV set

1 Please press down the power switch to

switch on AC power supply and the power

indicator will light .

2 If the indicator is lighting in red, press

Indicator

POWER button on the remote control again.

- CH + - VOL +

TV/AV MENU

POWER

Remote receiving window

3 If you want to exchange to standing by

status, please press down POWER button on

the remote controller.

4 If you want to fully switch off the power

supply for the TV set, please press down the

power switch button on the TV set.

Choose the Menu Language

When you start using your set for the first time, you must select the language which will be used for displaying menus and indications.

1 Press MENU and VOL+/-button to select

the FUN. Menu.

2 Press CH+/-button to select Language. 3 Select a particular language by pressing

VOL+/- button repeatedly.

You can choose one of two languages. (Chinese or English)

4 When you are satisfied with your choice,

press MENU button to return to normal viewing.

Select input modes

Choose the input source

If you hope to enjoy the picture from the external

TV/AV

S-VIDEO

DVD/DTV

PC/DVI

input source, before to select the source, you need to connect the devices, otherwise, when you select the source, the none or no signal will appears on the screen.

Press TV/AV button on remote

Source

controller, the menu appears on the screen. Then press CH+/- to select the TV item, and press VOL+/- to ensure it.

TV: the input source from ANT IN terminal output. AV1 : the input source from AV1 terminal output. AV2 : the input source from AV2 terminal output. YPbPr/YCbCr: the input source from YPbPr terminal

output.

the input source from VGA IN terminal

VGA:

output. DVI: the input source from DVI IN terminal output.

USB: the input source from USB socket terminal

output.

Before watching TV program, you need to ensure your TV in TV mode.

Searching Channel

This TV set has three methods to set channels, which are respectively full automatic,

manual search fine tune.

In this section, how to use the remote control to set channel is explained. You can also use

buttons on the TV set to set channel.

Full automatic search mode

Automatic search

PSM

VOL-

CH+

CH-

Q.VIEW

VOL+

1 Press the MENU button and

VOL+/- button, till tuning menu

shown on the right display on

the screen.

Note : the tuning menu will be

Color Sys. Auto Sound Sys. D/K Manual Search Store Program --Fine Tune 49.75MHz Skip Off Auto Search Prog. Switch

B C

in normal TV mode.only operated

2 Press the CH+/- buttons to

select "Auto Search" item.

VHF-L 188.16

3 Press the VOL+ button to

ensure automatic search function work.

After the s arch has finished, ae ll channels now playing program will be automatically preset in order.

4 Press MENU button to stop automatic search function.

Searching Channel

Manual search

78 9

CH+

VOL-

CH-

PSM

Q.VIEW

VOL+

1 Press the CH+/- buttons or the

PROGRAM NUMBER 0-9

AUTO D/K

button to choose desired channels regard channel 1 as example

2 Press the MENU button and

VOL+/- button, till the TUN. menu shown on the right display on the screen.

3 buttons to

Press the CH+/-

Color Sys. Auto Sound Sys. D/K Manual Search Store Program --Fine Tune 49.75MHz Skip Off Auto Search Prog. Switch

B C

select " Manual Search" item.

VHF-L 188.16

4 Press the VOL-/+ buttons to

start searching.

When searching successfully for the channel, the Manual search stopping automatically, at this time, press CH- button to select

Store Program, then press VOL+/- to set the store.

Fine tune

If the picture and/or sound are poor, try using the FINE TUNE feature. Do not use this feature unless reception is poor.

1 Repeat step 1-2, then press CH+/- buttons to select

" Fine Tune" item.

Color Sys. Auto

2 Press VOL-/+ buttons repeatedly

to carry out fine tune, till the best

picture and sound are obtained,

then loosen the button.

Sound Sys. D/K Manual Search Store Program --Fine Tune 49.75MHz Skip Off Auto Search Prog. Switch

B C

Watching TV Program

You can watch TV program in a presetting channel.

Watching TV program

To select the TV mode

S-VIDEO

DVD/DTV

TV/AV

PC/DVI

Before watching TV program, you may ensure your TV in TV mode. Press TV/AV button to select TV mode.

78 9

CH+

VOL-

CH-

PSM

Q.VIEW

VOL+

How to select the desired program

1 Using "Program number" buttons.

Directly enter the channel number with the numeric keypad on the remote control. If to select channel numbers of double-digit or three-figure , press continuously the numeric buttons in three second.

2 Using the CH+/- buttons.

Press the CH+ button to select a channel number in number

increasing direction.

Press the CH- button to select a channel number in number

decreasing direction.

How to select the desired sound

Press the VOL-/+ buttons on the remote or the front of the TV set to adjust the volume level. The range is 0~100. When the volume buttons are pressed the volume level is displayed automatically on the TV screen.

Volume

Watching TV Program continued

Watching TV program

If the color of some channel is abnormal

PSM

VOL-

CH+

CH-

Q.VIEW

VOL+

Usually this should be set in the auto position. However if the color displayed on the screen are incorrect, you can manually select the correct color system. Press the menu and VOL+/- button, till the picture menu shown on the right will display on the screen.

If picture color is abnormal

Press the CH+/- buttons to select "Color Sys.", then press the VOL-/+ buttons to select the correct color system. In general, you can set it as "AUTO".

If sound is abnormal

Press the CH+/- buttons to select "Sound Sys.", then press the VOL-/+ buttons to select the correct sound system. In general, you can set it as "D/K".

Color Sys. Auto Sound Sys. D/K Manual Search Store Program --Fine Tune 49.75MHz Skip Off Auto Search Prog. Switch

B C

PSM

VOL-

CH+

CH-

Q.VIEW

VOL+

Skip

After the programs are presetting, you can skip some

programs so that to select your favorite channels only.

1. Press CH+/- button or Direct-digit

choosing button to select a channel directly (take channel 18 for example).

2.Press MENU CH+/-and VOL+/ button, till theTUN. menu shown

on the right will display on the screen.

Color Sys. Auto Sound Sys. D/K Manual Search Store Program --Fine Tune 49.75MHz Skip Off Auto Search Prog. Switch

B C

3. press VOL-/+ button to set Skip On.

4. press MENU to exit.

If you want to recover the skipped channel

1. Use Direct-digit Choosing button to select the number of the channel to be recovered.

2. Do the above steps again.

3. Press VOL+/- button to set Skip OFF.

Watching TV Program continued

Watching TV program

Prog. Switch

PSM

VOL-

CH+

CH-

Q.VIEW

VOL+

Q.VIEW

1. Press MENU CH+/-and

VOL+/- button, till the TUN. menu shown on the right will display on the screen.

2. Press CH-/+ button to select

Prog.Switch.

Color Sys. Auto Sound Sys. D/K Manual Search Store Program --Fine Tune 49.75MHz Skip Off Auto Search Prog. Switch

3. Press VOL+ to enter the

submenu, and press the digital button to set the desired

channel number,

Press CH+ button to To Prog. Press the digital button to set the exchange channel number, press CH+ button to Switch, then press VOL+ button to ensure.

Current Prog. 000 To Prog. 001 Switch

4. press MENU exit.

Quick program view

This function enables quick swap to the last watched program.

1 Suppose the channel number you

used just now is 8 and the channel number you are using is 18 (as shown in the figure).

AUTO D/K

PSM

VOL-

CH+

CH-

VOL+

If you want to return to the last

watched program channel 8, you can

AUTO D/K

simply press the Q.View button.

If you want to return to channel 18,

press the button again. Use this function, you can easily change

AUTO D/K

between the channel you are using and the channel you used last time.

Picture Control Functions

Multiple picture modes

How to select picture modes

You can quickly select the desired picture mode from three preset modes and one customized mode.

CH+

Q.VIEW

VOL+

Press the PSM button to select the

desired picture quality. Four kinds

of picture modes (i.e.,

"Soft", "Personal", )

"Normal",

"Bright"

can be selected in turn.

The 4 modes are

Picture mode

Personal

Normal

Soft

Bright

Picture quality

A spare setting that can be adjusted to personal tastes

Designed for rooms that have good all round lighting

Designed for night time low light viewing

Designed for rooms with high ambient lighting such as daytime sport;

PSM

VOL-

CH-

PIC. Mode

Bright

Normal

Soft

Personal

PSM

VOL-

CH+

CH-

Q.VIEW

VOL+

How to customize your own picture status

1 Press the MENU button and

VOL+/VOL- button , till the

PIC menu shown on the right

display on the screen.

2 Press the CH+/- buttons to

select the item to be adjusted, then press the VOL-/+ buttons to obtain the desired effect.

ITEM

Brightness

Contrast

Sharpness

Chroma

Hue

(only in NTSC mode)

BackLight

NOTE these items are adjustable only under the personal setting.

Press VOL-

Dark

Weak

Soft

Shallow

More purple

Green

Mode Personal

Contrast

Brightness

Chroma

Hue

Sharpness

BackLight

DNR Auto

B C

Brightness

Press VOL+

Bright

Strong

Sharp

Deep

More green

Red

50 50

Picture Control Functions

Multiple picture modes

DNR( Digital Noise Reduction)

Automatically filters out and reduces the image noise and improves picture quality when receiving

Q.VIEW

weak video signals.

PSM

VOL-

CH+

CH-

VOL+

1 After calling up the

Picture menu, press CH+/- button to select

item.

"DNR"

2 Press VOL+ to enter

the list. Select Auto,

Off

, Weak

, Medium

or Strong

according

to the image noise.

Mode Personal

Contrast

Brightness

Chroma

Hue

Sharpness

BackLight

DNR Auto

B C

50 50

3 Press MENU return

to the picture menu.

In other modes

TV/AV1/AV2/USB

Mode Personal

Contrast

Brightness

Chroma

Hue

Sharpness

BackLight

DNR Auto

50 50

B C

Only N system.

VGA/DVI

Mode Personal

Contrast

Brightness

Chroma

Hue

Sharpness

BackLight

DNR Auto

50 50

B C

No adjustable

YPbPr/YCbCr

Mode Personal

Contrast

Brightness

Chroma

Hue

Sharpness

BackLight

DNR Auto

50 50

B C

No adjustable

Sound Control Functions

Multiple sound modes

PSM

VOL-

CH+

CH-

CH+

CH-

Q.VIEW

VOL+

Q.VIEW

VOL+

How to choose sound mode

Press the SSM button to select the

desired sound quality. Four kinds

of sound modes (i.e.,

Theater ,

Personal ,and

Standard ,

Music ) can be selected in turn.

Sound mode

Personal

Standard

Music

Theater

Sound quality

A spare setting that can be adjusted to personal tastes

normal sound with moderate bass and treble setting

Designed to reduce the bass and treble which enhances the voice for news programs

Enables extra bass and treble to enhance the movie experience;

SOU. Mode

Music

Standard

Theater

Personal

How to customize your own sound quality

1 Press MENU button and

VOL+/- button , till the SOU. menu shown on the right display on the screen.

2 Press CH+/- buttons to

select the item to be

adjusted, then press VOL-/+ buttons to obtain the desired effect.

Volume 50 Balance 0 SOU. Mode Personal Treble 50 Bass 70 Surround On AVC Off Woofer Off

B C

Treble Increases or decreases the treble. Bass Increases or decreases the bass.

Sound Control Functions

(Continue)

Balance

This will adjust the output of the right and left speakers to obtain the best stereo reproduction for your listening position.

PSM

VOL-

CH+

CH-

Q.VIEW

VOL+

The intermediate value is 0. When indication value of Balance increases toward+50, sound of the right and left speaker becomes stronger and weaker, respectively. When indication value of Balance decreases toward -50, sound of the right and left speaker becomes weaker and stronger.

Press CH+/- button to Select Balance, Press VOL+ button to increase the audio output in the right

speaker; press VOL- button to increase the audio output in the left speaker.

surround sound

The surround sound feature expands the audio listening field wider and deeper to create exceptional sound quality from the TV`s speakers.

Press CH+/- button to Select Surround, press VOL+/- button to set Surround as Off or On

AVC( Auto volume contol)

Each broadcasting station has its own signal conditions, and so it is not easy for you to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel and reduces the volume differences between channels and programs, providing a more constant overall level. This will also reduce the dynamics of sound.

Press CH+/- button to Select AVC, press VOL+/- button to set Surround as Off or On

Woofer sound

Woofer is a speaker that complements front speaker`s reproduction capability of low-pitched sound.

Press CH+/- button to Select Woofer, press VOL+/- button to set Surround as Off or On

Sound Control Functions

Mute

How to eliminate sound

When you need to pay attention to surrounded sounds, or there is a telephone calling you or there are some

MUTE

guests visiting you, the sound elimination (mute) function is very convenient.

1 Press the MUTE button on

the remote control and "MUTE" type face will display on the lower part of the screen. At this time, the sound of the TV set is turned off.

2 If you want to recover the

sound, press the MUTE button again or directly press the VOL-/+ buttons.

Mute

Time Functions

Clock setting and timer on/off functions

Clock setting

The clock will only work if the TV set is turned on or in standby. When the set is disconnect from the power supply or is turned off by the main power on

Q.VIEW

the rear panel, the clock loses power and will need to be reset when the power is reconnected.

CH+

VOL-

PSM

CH-

VOL+

NOTE:

1.If Clock option is setting,

the time you set for Off Timer /On Timer will be a point of time. Otherwise, if Clock is not set, the time you set for Off Time/On Time will be a period of time.

2.Sleep Off/ Off Time can not

be set at simultaneously. If both of the two are set, the later setup will be operation.

1 Press button and VOL+/-

button, and the TIME menu display on the Screen.

2 Press CH+/- buttons select

Clock --:-Off Time --:-On T ime -- :-On Prog 000 Remind Time --:-Remind Prog. 000

"Clock",press VOL -/+ buttons to select hour or minute position, then press the digital buttons to set the

B C

value of hour or minute;

On/off timer

Using on/off timer function, the TV set can automatically turn on to a preset program or shut down in a preset time.

1 Press CH+/- buttons to select

"On time", press VOL-/+buttons to select hour or minute position; then press the digital buttons to set the value of hours or minutes.

2 Press CH+/- buttons to select

"On prog", then press the digital buttons to select your desired channel.

Clock --:-Off Time --:-On Time --:-On Prog 000 Remind Time --:-Remind Prog. 000

B C

3 Repeat step 1-2 to set Off time .

Indication will appear on the screen 1 minute prior to expiry of set time. Suppose Timer Off is set, and indication is as follows:

Off Time

When the above indication appears on the screen, set time may be changed if VOL+/- button is pressed.

Time Functions

Remind Time and Remind Program setting

How to use the remind time and program

Program remind timer, that displays an on-screen

CH+

Q.VIEW

reminder prompt, when a program on a different channel is due to start.

PSM

VOL-

CH-

VOL+

1 Press

button to call up the TIME menu on the screen.

2 Press CH+/- buttons to

select "Remind Time",

MENU and VOL+/-

Clock --:-Off Time --:-On Time --:-On Prog. 000 Remind Time --:-Remind Prog. 000

B C

then press VOL -/+ buttons to select hour or minute position; then press the digital to set the value of hour or minute.(take 19:30 as an example)

3 Press CH+/- buttons to

Clock --:-Off Time --:-On Time --:-On Prog. 000 Remind Time --:-Remind Prog. 000

move the cursor to "Remind Prog.", then press the digital buttons to set the desired

channel.

Function menu

It is possible to select language, OSD transparency, menu timeout, calendar, 3A optimize, time skip.

Function menu operation

PSM

VOL-

CH+

CH-

Q.VIEW

VOL+

1.Press MENU and VOL+/-

button to enter the FUN. Menu.

2. Press CH+/- to select

desired item.

3. Press VOL+/- button to

adjust the values level.

4. Press menu to exit.

Menu Timeout

Language English

Menu Timeout 15seconds

Menu Background Translucent

BlueScreen Off

Calendar

3A Optimize Off

Time Skip 0 Min

B C

No adjustable in YPbPr/YCbCr/ VGA/DVI/USB modes

No adjustable in AV/AV2/YPbPr/ YCbCr/VGA/DVI/USB modes

Repeat step 2 and 3 to set the menu out time. Each Press of VOL+/- button repeatedly to select the number of preset minutes, the time will be set in sequence: 5seconds, 10seconds, 15seconds, 20seconds, 25seconds, 30seconds, 40seconds.

Menu Background

Repeat step 2 and 3 to select semi transparency and opaque background of OSD.

BlueScreen

Repeat step 2 and 3 to select BlueScreen. If you select ON, when no signal, the background is blue; if you select OFF, when no signal, the background is dark.

3A Optimize

Repeat step 2 and 3 to set the 3A optimizeas on or off. The 3A optimize tracks picture contrast and color to improve the quality of picture in terms of brightness and sharpness.

Calendar

Repeat step 2 to select the Calendar, press VOL+ button to search the desired year or month. Press CH+/CH- button to adjust the desired year or month.

Time Skip

Repeat step 2 to select the Time Skip, Each Press of VOL+/- button repeatedly to elect the number of preset minutes, the time will be set in sequence: 0seconds, 1seconds, 2seconds, 3seconds, 4seconds, 5seconds, 6seconds,7seconds, 8seconds, 9seconds,10seconds.

Adjust menu

CH+

VOL-

Q.VIEW

VOL+

1.Press MENU and VOL+/- button to enter the

ADJ. menu.

2. Press CH+/- to select

desired item.

3. Press VOL+/- button to

adjust the values level.

4. Press menu to exit.

Display Mode Normal

Adjust

RGB

Default

Auto Sync.

Color Temperature Normal

Black Stretch On

B C

PSM

CH-

Display Mode

Repeat step 2 and 3 to set the Display Mode.

Normal

Choose Normal when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped.

Wide Screen

Choose Wide Screenwhen you want to adjust the picture horizontally, in a linear proportion to fill the entire screen.

4:3 Mode

Choose

4:3 when you want to view a picture with an original

4:3 aspect ratio, with black bars appearing at both the left and right sides.

You can also press PIC.SIZE button on remote controller to select the desired picture ratio.

Color temperature

Repeat step 2 and 3 to set the .Color temperature

There are four kinds of modes (i.e., "Normal","Warm" , "Green","Cold")can be selected in turn.

This will increase or decrease (blue) colors to suit personal preferences. Select Cool to give the white colors a blue tint, Normal to give the white colors a neutral tint, colors a red tint. Green to give the white colors a green tint.

Warm (red) and Cool

Warm to give the white

Black Stretch

Black Stretch-(Automatically Increases the Contrast Rage)

Repeat step 2 and 3 to set the .Black Stretch

Adjust menu

In VGA and DVI input mode, H-Position and V-Position can be adjusted to eliminate transverse line interference and decentered picture.

PC setting

S-VIDEO

DVD/DTV

Q.VIEW

VOL+

PC/DVI

TV/AV

PSM

VOL-

CH+

CH-

Note:

1. As adjusting H position or V position parameter, It is natural that the picture will have faintness once in a while if the range is more, then to adjust contrarily to normal position.

2. H-position,V-position,Auto Adjust are not available in TV mode.

3. Auto Adjust is not available in AV and S-VIDEO mode.

Press PV/DVI button to select PC or DVI mode.

1 Press MENU button and VOL+/VOL- button , till the ADJ.

Menu display on the screen.

2 Press CH+/- buttons to select the item to be adjusted, then

press VOL+/- buttons to adjust.

Display Mode Normal

Adjust

Only be adjustable in the VGA/DVI mode.

Adjust

This will adjust the picture of H-positon, V-positon, H-size, V-size and Fine Tune.

Press CH+/- buttons to select Adjust, then press VOL-/+ buttons to enter the sub menu.

H Size Horizontal size of picture can be adjusted in this item. H Position: Horizontal position of picture can be adjusted in this

item.

V Size: Vertical size of picture can be adjusted in this item. V Position: Vertical position of picture can be adjusted in this

item.

Fine Tune: Adjust phase to the best effect suiting for VGA signal.

RGB

Default

Auto Sync.

Color Temperature Normal

Black Stretch On

H Size

H Position

V Size

V Position

Fine Tune

B C

Adjust menu

In VGA and DVI input mode, H-Position and V-Position can be adjusted to eliminate transverse line interference.

(Continue)

PC setting

Press CH+/- buttons to

Display Mode Normal

Adjust

RGB

Default

Auto Sync.

Color Temperature Normal

Black Stretch On

B C

Red

Green

Blue

PSM

VOL-

CH+

CH-

Q.VIEW

VOL+

select RGB, then press VOL/+ buttons to enter the sub menu.

2 Press

CH+/- buttons to select the desired item, press VOL+/- button to adjust.

RGB is opted for adjustment

of the numerical value of red, green and blue in VGA/DVI mode.

NOTE As the frequency of display differ in PC device you may select the appropriate frequency to obtain desired effect. If the signal of receive is excess, the picture can be not displayed or wrong on the screen.

Default

This is opted for adjustment of parameters to delivery setup in VGA mode.(After the operation, complete will be on the right of the operation)

Repeat step 1 and 2 to set the Default.

Auto Sync

This is opted for adjustment of picture location requency and phase parameters in VGA mode.(After the operation, complete will be on the right of the operation) In VGA , if no signal input, the Auto Sync will be no adjustable.

Repeat step 1 and 2 to set the .Auto Sync

Note

Recommendatory frequency as follow:

Sequence frequency

H-frequency

KHz

31.5

37.88

48.36

V-frequency

Remark

DOS

VESA

Lock setup

The television has the function of security default lock. Password needs to be entered when the program lock mode is to be set.

TIME.SKIP

SLEEP

H.LOCK

SHUTTLE

How to use the password function

Press H.LOCK button, Password will appear on the screen.

The initial password of the television is 0000 and security default password is 9443. then enter Lock Set menu.(as follow)

Lock Set

Password

Tuning Lock Preset Prog. Prog. Num Source Lock Child Lock Max Volume UnLock

Off Off

Off

100

78 9

Note:

If Clear Lock is activated, the password setup cannot be changed.

Note: If the password is not correctly entered, you will be required to reenter the password and the cursor will stay at the first place.

Press EXIT to cancel the window.

To set new Password

The password can be changed. After entering the Lock set menu, Press CH+/- to select password, Press vol+/-, the screen will display the follow.

Old Pw. ----

If correct password is entered, the screen will display the follow.

New Pw. ----

Press digital button to set the new desired password, and the screen will display the follow.

Confirm ----

If the desired password is entered correctly twice, the old password will be changed. If the desired password is not correctly entered twice, the screen will display New ----, then you have to reenter the password.

Lock setup

TIME.SKIP

SLEEP

H.LOCK

Q.VIEW

CH+

SHUTTLE

Tuning Lock

Press CH+/- to select Tuner Lock and VOL+/- to set On/ Off. (To set On, some operation such as search will be not available. When enter the TUN. menu, Tuner Lock will be on the screen, and the time will be the same with the main menu if no operation. If you want to operate TUN. menu, you need to enter the Lock menu to set Tuner Lock Off or operate Clear Lock.

Preset Prog.

Prog Set is opted for setting up start channel. Press CH+/- button to select Prog Set. Press VOL /- button, sources can be swapped in TV/AV1/SAV1/AV2/YPbPr/VGA/DVI/USB/Off mode. After setup, the set mode will be entered if the television is switched off and on again. To set Off, the television will memory the off-channel.

PSM

VOL-

CH-

VOL+

Prog. Num

Prog Num is opted for setting up preset channel. Press CH+/- button to select Prog Num. Press VOL /- button, to select

channel number.(The item is not available except TV signal.)

Source Lock

Source Lock is opted to hinder external input modes, such as AV, Scart and VGA. Press CH+/- button to select the option, and press VOL+/- button to display Source Lock menu as follows:

Source Lock

AV1

SAV1

AV2

YPbPr/YCbCr

VGA

DVI USB

Press CH+/- button to select desired option. Press VOL+/- button to set up the mode of Source Lock. If some Source Lock is set ON, the mode will be entered and the screen will display blue background with the mute mode activated and Lock. In lock on mode, when screen is blank, icon Lock will be always displayed on the screen. If lock mode is to be verified, enter Source Lock submenu and set relative mode off, or select Clear Lock in the Lock Set Menu.

Off

Lock setup

CH+

Q.VIEW

VOL+

PSM

VOL-

CH-

Child Lock

Press CH+/- button to select Child Lock. Press VOL+/- button to set On or Off mode. If lock on mode is set, Child Lock is in activated automatically. In such case, if Child Lock button (button on the television) is pressed, the screen will display Child Lock, which can be erased by press of EXIT button. 5 seconds later after the latest press, the screen display will disappear automatically. The Child Lock mode can be resumed by entering Lock Set menu, set Child LockON or OFF.

Max Volume

Press CH+/- button to select Max Volume. Press VOL+/- button for adjustment between 0 100. If a

certain value is set, when volume is being adjusted, the sound value can not exceed maximum volume value. If current volume is over Max Volume, when Lock Set menu is set, current volume will become set maximum volume. If current volume is below maximum volume, customer set volume will stay unchanged.

UnLock

Press CH+/- button to select Unlock mode. Press VOL+/- button to unlock all set modes, setting all

lock options to off, and the maximum volume returns to 100.

Others functions

Nicam Sleep display functions

NICAM

Press the I/II button will result in fast swap of NICAM function of current program.

DISPLAY

SLEEP

Display function

Press the DISPLAY button, then

the channel number and system

will be displayed on the screen.

Press again,

the DISPLAY button

it is disappear.

AUTO B/G

Sleep

The TV set will switch automatically to standby at the preset time with the SLEEP time on. You may set the sleep time.

each press ofSLEEP button repeatedly on the remote control to select the number of preset minutes, the timer will be set in sequence: (0Min, 5Min, 15Min, 30Min,60Min,

90Min, 120Min).

After the sleep time is programmed, the display will appear briefly every ten minutes to remind you that the sleep timer is operating.

To confirm the sleep timer setting, press SLEEP and the remaining time will be displayed for a few seconds.

To cancel the sleep timer, press SLEEP repeatedly until the display turns to0 Min.

Others functions

Scan Shuttle functions

Scan

SCAN

SHUTTLE

1 If you want to select a desirable program, you may

scan all the TV programs in memory. You can simply press Scan button to do this. Press scan button once, there are nice pictures on the screen, press Scan button again, there are sixteen pictures on the screen to scan.

2 If you want to stop the function during auto tunning,

simply press Scan button again.

Shuttle function

Shuttle function enables quick swap to setting program.

Press Shuttle button about 3

second, and the display store

on the screen, at the time, you

may operate other, then if you

scan over program, you may

press again shuttle button to

return to the setting program.

Store

Stream media broadcast system

Stream media play prepare

1. Supporting equipment

1.Equipment supporting Mass and Storage agreements include USB, mobile hard disk, card reader, some MP3 and digital camera.

2.Equipment supporting PTP agreement includes some digital camera.

2. 1 Supporting media: picture, music, MPEG4, MPEG2

and MPEG1;

Supporting file format

*.Avi, *.DIVX, *.MPEG,*.DAT, *.MP3, *.WHA, *.JPG and *.JPEG. Due to particularity of file code and file mode, It is possible that some files cannot be read.

2 If Pic & Music mode is activated, relative media file format will include JPEG and MP3 files. After Picture is selected, MP3 files set for play will open both music and picture files for sync play performance. As some files must be read while music is being played, the speed of picture operation response might be affected.

3.Before starting operation, verify USB storage device is of FAT32 and FAT file system format. At present, this television does not support NTFS and the file systems of other format.

4.Many movie files use suffix of AVI and MPG. However, many kinds of format

are used for internal files. This television can only play some AVI and MPG files of this format. Those files with suffix of dat are not movie files, but data files used by computers, and cannot be played for movies.

5.External card reader supports most digital cards available in the market. Readable digital cards are classified according to the property of card readers and can be connected to mobile hard disks (working voltage 5.0V, working current not over 500mA).

6. Some time the television operation may be halted due to excessive rate of information code errors. In such case, restart the system. As there are many nonstandard USB mobile devices in the market. If this kind of USB mobile devices are used in the stream media play system, the problem of identification failure might occur. The same problem may also happen with computers, not televisions.

7.It is suggested that the external devices with USB2.0 interface be used to improve velocity of information reading and continuity of information play.

Stream media broadcast system

Stream media system setup

Note: Memory cards or USB devices are not supplied with this TV.

USB setup

1 Insert USB in the card slots at the left side the TV. 2 Insert it to be clicked in. 3 Press USB button on the remote controller to enter

the stream media system.

CARD setup

This TV is compatible with the card of SD/MMC/CF/MS/SM format.

Press ENTER key to play this devices

How to use

1 Jack of card Instructions

Jack of SM card

Jacks of SD MMC MS card

Jack 1

Jack 2

Jack of CFcard

2 Insert the card as right direction. As following Card in common use

1 CF card

jack

COMPACT FLASH

DIGITAL MEMORY CARD

128

2 MMC card

jack jack jack jack

MULTIMEDIA

CARD

128

3 MS card

128MB

Note

1.Please note chooses uses the digital memory card with you corresponds the receptacle

2.Card reader in 1 cannot simultaneously insert two kind of cards in the graphical representation position

4 SM card

128MB

MEMORY STICK

AAA Multimedia Player

USB1

USB2

File Copy

SETUP

Remove USB1 Remove USB2

5 SD card

128MB

Note:

1.the card insertion time, after the flows media system starts 2s , insert the card to numerical code card reader , do not bring card to start flow media system.

2. After card insertion, indicator light will shines, and enters glitters condition, after period of time , indicator light enters constant bright condition, indicates already distinguishes finished, this time carries on play operation and so on . 3, In the market ,the digital card type are very many, please uses standard product of the standard factory , meets reads takes difficult or reads speed limits, please replaces the digital card.

Stream media broadcast system

Removing USB device

Press up or down to select Remove USB,

1 and press ENTER button to ensure it. 2

press RETURN button to exit menu. 3 Remove the memory card/USB device. 4 If to remove the card device, press RETURN button to return to the main menu, and remove the card.

Card data protection

- Do not remove the card/USB device when the content is being read or when

browsing. Such action may damage the memory card/USB device.

- Do not touch the terminals on the back of the card.

- Always insert a card in the correct direction. Failure to do so may result in damage to the card and the unit.

- Do not subject the card to excessive pressure or strong impacts.

- Malfunctions of the unit or card may result in data loss or damage to the card.

- Haier shall not accept any liability for damage or loss of stored data.

Warning:

Memory cards can be swallowed by young children. Do not allow children to handle memory cards. Please remove the memory card immediately after use.

AAA Multimedia Player

USB1

USB2

File Copy

SETUP

Remove USB1

Press ENTER key to remove USB1 devices

Remove USB2

Stream media broadcast system

To start the media play

1. Press USB button to enter media play system.

2. Press up or down button to select the desired option.

AAA Multimedia Player

ZOOM

USB

RETURN

HELPENTER

3. Press ENTER button to enter desired option.

4. Press to return the

RETURN

Press ENTER key to play this devices

USB1

USB2

File Copy

SETUP

Remove USB1 Remove USB2

previous menu.

5. If to exit USB system, you need to return to the main menu to protection card data.

Note: If there are no operation two minute later, the TV will enter the saver automatically, at the time, press any button of USB system to exit the saver menu.

To operate the menu

1. Press up or down to select the item with up or down.

2 Press or to select the desired item of submenu with left or right.

3 Press ENTER button to ensure the desired option to enter the submenu to resume the speed of standard.

4. Press or button to operate play quickly or slowly.

5.Press pause button to make the program stop and press again to resume it.

6.Press ZOOM button to make zoom, and press or or / button to enjoy the detail.

7 Press HELP button to call up or exit the OSD information. And press HELP button to call up or exit the OSD during operating file copy.

8 press RETURN button to return to previous menu and stop play, press RETURN button repeatedly to return to main menu.

Stream media broadcast system

To select stream media broadcast system

ZOOM

USB

RETURN

HELPENTER

1.Press up or down button to select "Card"or "USB". (The device be inserted and identified).

2. Press ENTER button to enter adjusted option.

To play picture

1. Press up or down button to select Picture item.

2. Press ENTER button to enter the menu of play.

3. Press again up or down button to select desired enjoy picture, and then press ENTER button to enter the play menu.

4. On screen display, Press or to select the speed of play.(Normal, Slow, Fast).

5. Press or button to swap the picture of next and previous. Press RETURN button to return.

AAA Multimedia Player

USB1

USB2

File Copy

SETUP

Remove USB1

Press ENTER key to play this devices

JPEG

0016.JPG

Slideshow speed Slow

Remove USB2

AAA Multimedia Player

Picture

Movie

Music

Music andPic

AAA Multimedia Player

F-007 .JPG F-008 .JPG

F-009 .JPG

F-010 .JPG F-011 .JPG

F-012 .JPG

Play

IMAGE

Note:

the play file menu are different with your USB devices.

To enjoy the picture detail

1. After selecting the picture to play, press ZOOM to select desired zoom.

2. Press HELP button to exit the display, and then press or or or to move and enjoy the picture detail.

To make the picture overturn

Each press of button to make overturn 90 with right, press ENTER button to resume the program playing.

Stream media broadcast system

To enjoy music

1. Press up or down button to select "Music" option.

AAA Multimedia Player

ZOOM

USB

RETURN

HELPENTER

USB

RETURN

HELPENTER

2. Press ENTER button to enter play menu.

3. Press up or down button to

Picture

Movie

Music

Music andPic

select desired music, and then press ENTER button to play music.

Note: The play file menu are

AAA Multimedia Player

The day went away .MP3

different with your USB device.

4. When playing music, press up or down to select play mode, (play mode: standard, program, Random; Repeat mode: Disc Repeat, Folder Repeat, File Repeat)

The day you went away.MP3

Play mode standard

and press ENTER button to ensure the mode.

5. When playing music, press or button to swap the

01 07 / 04 20

next and previous music

6. Press RETURN button to exit

the playing. Note: 1. DISC Repeat mode: press up or down button, the DISC Repeat will appear on the screen, and then press ENTER to ensure it.

The day went .MP3

Soft .MP3

The day went .MP3

2. Program mode:

press or button to select the music in right list, and press

Done

ENTER button to program in turn, and then press button to select "Done", and then press ENTER button to ensure it.

Stream media broadcast system

To play Movie

1. Press up or down button to

ZOOM

USB

RETURN

HELPENTER

select "Movie" option.

2. Press ENTER to enter play menu.

3. Press again up or down button to select desired movie, and press again ENTER button to play it.

4. On screen display, press or button to select in

turn:

File -PlayBack Control-Audio channel-Play Mode

5. Press or button

to set speed, press ENTER button to resume to standard mode.

AAA Multimedia Player

Picture

Movie

Music

Music andPic

E08-8SOBTILES-1

ZOOM

USB

RETURN

HELPENTER

6. Press or button to

select the next movie or previous.

7. Press RETURN button repeatedly

to return.

Stream media broadcast system

To select the Music and PIC item

1. Press up or down button to select "Music and Pic" option, and press ENTER button to enter menu.

2. Press up or down to select desired file, and press button to ensure it. ( to cancel). Repeat step 2 to select more file, and press ENTER button to enter play menu.

3. On screen display menu, press up or down to select the speed to play.( Normal, Slow, Fast).

AAA Multimedia Player

ZOOM

USB

RETURN

HELPENTER

Picture

Movie

Music

Music andPic

F-007 .JPG F-008 .JPG

F-009 .JPG

F-010 .JPG F-011 .JPG

F-012 .JPG

ZOOM

USB

RETURN

HELPENTER

JPEG

MP3

The day you went away .MP3

4. Press or button to swap the next and previous

Play mode standard

0016.JPG

picture, press or button to select the music.

Note: press pause button to stop playing the picture.

5. Press repeatedly RETURN button to return.

Note: On the music and picture, the playing music is *.mp3 format.

Play

00 01:43

IMAGE

Stream media broadcast system

Copy file function

1. Press up or down to select

ZOOM

USB

RETURN

HELPENTER

"File Copy" item.

2. Press ENTER button to enter the copy menu.

3. Press ENTER button to enter the file menu, and press up or down button to select "Card" or "USB"

4. Press ENTER button to enter Card or USB, and select the files to copy, then press HELP button to call up COPY and PASTE, and then press

/ button to select COPY, and press ENTER button to confirm, press again

/ button to select PASTE, then press ENTER button to paste, in this time, the "File already exits, overwrite it "will appears on the screen, and press

or button to select YES/NO, and then press ENTER button to confirm.

AAA Multimedia Player

Press ENTER key to enter COPY menu

Select source Port:

USB1 USB2

Root

F-007 .JPG F-008 .JPG

F-009 .JPG

F-010 .JPG F-011 .JPG

F-012 .JPG

Root

F-007 .JPG F-008 .JPG

F-009 .JPG

F-010 .JPG F-011 .JPG

F-012 .JPG

USB1

USB2

File Copy

SETUP

Remove USB1 Remove USB2

COPY PASTE

Note:

button to select the

all files;

button to cancel.

5. Press ENTER to cancel.

Stream media broadcast system

To select language

ZOOM

USB

RETURN

HELPENTER

1. Press or to select

"SETUP " item.

2. Press ENTER button to

enter the SETUP menu,

3.and press again ENTER

button to enter language option.

4. Press or to select

desired language, and press ENTER to ensure it.

5. Press RETURN button to return.

To display the version

. Repeat steps 1-2, and

then press

or to

select version.

2. Press ENTER button to

display the version number.

AAA Multimedia Player

Card

USB

File Copy

SETUP

Remove USB

Press ENTER button to SETUP menu

AAA Multimedia Player

Languages

Version

AAA Multimedia Player

V2.1.04250

Specifications and functions

Picture proportions 4:3/wide screen: (3 modes) Panorama picture: 16:9 Picture element: Multi-input compatibility Advanced technology for motion picture processing Two speakers/optional

Complex component: RCA-pin 3 Component video signal: YUV 1 S terminal: Mini DIN 4-pin 1 RGB input: D-sub 15-pin 1 (480i/p, 720p, 1080i, 1080p) Audio input: RCA-pin TYPE (L/R) 4: full support separate audio frequency input Audio system: stereo

1366 768

Size: WxDxH unit:

stand and speaker included

1010mmX300mmX605mm

Working conditions

Power: 150V-240V, 50/60Hz

Power consumption: 140W

Temperature

Working: 5 35 Storage: -10 45

Humidity

Working: 20 80% Storage: 5 90%

Maintenance

- Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning.

Cleaning the Screen

1. Here`s a great way to keep the dust off your screen for a while. Wet a soft cloth in a

mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it`s almost dry, and then use it to wipe the screen.

2. Make sure the excess water is off the screen, and then let it air-dry before you turn on

your TV.

Cleaning the Cabinet

To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. Please be sure not to use a wet cloth.

Extended Absence

If you expect to leave your TV dormant for a long time (such as a vacation), it`s a good idea to unplug the power cord to protect against possible damage from lightning or power surges.

Troubleshooting

For the sake of time and cost, it is strongly recommended that you check out the problem by yourself according to the instructions listed hereunder before contacting the after-sales service for technical assistance.

Problem

No picture, no sound

Good picture, no sound

Failure of remote controller

No color, weak color or poor picture

Excessive brightness or darkness

Picture too big or small

One speaker failure

Slight sound from display

Turn on the power supply; Properly plug the TV set to the power socket; Check to see if the power cable of other appliance is plugged in the TV set. Make sure that the power cable of the TV set is properly connected.

Depress the volume button; Check out the audio frequency input signals.

Check to see if the remote controller display receiving window are blocked by other objects and if batteries are properly loaded.

Designate the item of color from the Picture menu and depress the volume button; Keep the display and VCR separate a reasonable space; Activate some functions to store picture brightness; Make sure that the display and signal source are available and turned on.

Adjust brightness or contrast.

Adjust the setup of sizes.

Balance the sound in the menu.

It is a normal phenomenon.

Possible remedies

Note: Do not leave the television with static picture in an extended period as it may

result in residual image on your television screen.

Note: Production of the screen requires high and precision technologies. However,

there might be some dark or bright (red, blue or green) spots, or some anomalistic stripes or spots. This is not defect. If the TV set is used in an area 2,400 meters above the sea level where the air pressure is below 750hpa, the picture on the screen may be affected and a muffled sound might be produced. These phenomena might happen in the area 1,500 meters above the sea level. This is resulted from difference between air pressures inside and outside the display. This is not a defect covered by the limited warranty.

NOTE

Design and specifications are subject to change without notice. The dimension in this manual is a approximation.

01 0090506321A

Haier L32A9-AKF, L32A9 -AK User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual