Haier L26A5A, L32A5A, L37A5A, L42A5A Owner's Manual

Please READ this manual carefully before
operating your TV, and retain it for future
reference.

LCD TV

OWNER`S MANUAL

MODEL :L26A5A

L32A5A
L37A5A
L42A5A

S

Safety of operators has been taken into consideration at the design and
manufacture phase, but inappropriate operation may cause electric shock
or fire. To prevent the product from being damaged, the following rules
should be observed for the installation, use and maintenance of th product.
Read the following safety instruction before starting the operation.
The User Manual uses the following symbols to ensure a safe operation
and prevent any damage to operators or properties:

Warning

This symbol indicates that high voltage is present inside. It is
dangerous to make any kind of contact with any inside part of
this product.

WARNING : To reduce the risk of electric shock do not remove
cover or back. No user-serviceable parts inside refer service
to qualified service personnel.

This symbol indicates that there are important operating and
maintenance instructions in the literature accompanying the
appliance.

Congratulations on your purchase, and welcome to the family !

Dear Haier product owner:

Thank you for your confidence in Haier. You`ve selected one of the
best-built, best-backed products available today. We`ll do everything
in our power to keep you happy with your purchase for many years to
come.
As a member of the Haier family, you`re entitled to protection by
one of the most comprehensive warranties and outstanding service
networks in the industry.

Thanks for investing in a Haier product.

""

""

RISK OF ELECTRIC SHOCK
DO NOT OPEN

WARNING

1. Retain these Instructions ---the safety and operating instructions should be retained for

Future reference.

2. Heed Warnings ---All warning on the appliance and in the operating instructions should be
followed.

3.Cleaning --- Unplug from the wall outlet before cleaning. Do not use liquid cleaners or
Aerosol cleaners. Use only dry cloth for cleaning.

4. Attachments ---do not use attachments
not recommended by the manufacturer as they may cause Hazards.

5. Water and moisture -- do not place this product near water, for example, near a bathtub,
wash bowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.

6. Do not place this unit on an unstable cart, stand, tripod, bracket, or table. Use
only with a cart, stand, tripod, bracket, or table recommend by the manufacture, or sold with
the unit.

7. Ventilation ---Slots and openings in the cabinets and the back or bottom are provided for
Ventilation and to ensure reliable operation of the product and to protect it from overheating,
and these openings must not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug, or other similar surface. This product
should not be placed in a built-in installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer`s instructions have been adhered to.

8. Power Source ---this unit should be operated only from the type of power source indicated on
the rating label. If you are not sure of the type of power supply to your home, consult your
Appliance dealer or local power company.

9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet. To prevent electric shock, ensure the
Grounding pin on the AC cord power plug is securely connected.

10. Power cord protection ---Power supply cords should be routed so that they are not likely to
Be walked on or pinched by items placed upon or against them. Pay particular attention to
cords or plugs, convenience receptacle, and the point where they exit from the appliance.

11. Lighting precaution ---for added protection for this product during a lighting storm or when
it is left unattended for long period of time, unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent damage to the product due to lighting and
power line surges.

12. Never push objects of any kind into this product through
openings as they may touch dangerous voltage point or short out parts
that could result in a fire or electric shock. Avoid spilling liquid of any kind
on the product.

13. Servicing ---do not attempt to service the product by yourself, as opening
or removing covers may expose you to dangerous voltage or other hazards.
Refer all servicing to authorized service personnel.

14.Damage Requiring Service ---Unplug this unit from the wall outlet and
refer servicing to qualified service personnel under the Following conditions:

Grounding or polarization ---

Accessories---

Important safeguards for you and your new product

Your product has been manufactured and tested with your safety in mind. However, improper
use can result in electrical shock or fire hazards. To avoid defeating the safeguards that have
been built into your new product, please read and observe the following safety points when
installing and using your new product, and save them for future reference.

Important Safety Instructions

S3126A

PORTABLE CART WARNING

(symbol provided by RETAC)

a. When the power supply cord or plug is damaged or frayed.
b. If liquid has been spilled, or objects have been fallen into the unit.
c. If the unit has been exposed to rain or water.
d. If the unit does not operate normally by following the operating instructions. Adjust only
those controls that are covered by the operating instructions, as improper adjustment of
other controls may result in damage and will often require extensive work by a qualified
technician to restore the unit to its normal operation.
e. If the unit has been dropped or damaged in any way.
f. When the unit exhibits a distinct change in performance; this indicates a need for service.

15.Heat --- The product should be situated away heat source such as radiators, heat registers,
stoves, or other products (Including amplifiers) that product heat.

16.Overloading ---Do not overload wall outlets and extension cord as this can result in a risk of
Fire or Electric shock.

17. Outdoor antenna grounding---If an outside antenna or cable system is connected to
the unit, be sure the antenna or cable system is grounded to provide some protection
against voltage surges and built-up static charges, Section 810 of the National Electrical
Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.

ANTENNA LEAD IN WIRE

GROUND CLAMP

ELECTRIC SERVICE EQUIPMENT

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM

(NEC ART 250, PART H)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)

Important Safety Instructions

Table of Contents

Accessories

Remote controller

User's manual

Alkaline battery(AA) 2

Power cable

STILLSTILL

SLEEPSLEEP PIPPIP

TV/AVTV/AV

P.STDP.STD S.STDS.STD

H.LOCKH.LOCK

CH.LISTCH.LIST EXITEXIT

SCANSCAN

SWAPSWAP

TIMERTIMER ZOOMZOOM

ABC@ABC@

DEFDEF

JKL%JKL%

GHI$GHI$ MNOMNO

STUVSTUVPOR&POR& WXYZWXYZ

*#()*#()

MUTEMUTE

DISPLAYDISPLAY

CH+CH+

CH-CH-

VOL-VOL-

VOL+VOL+

MENUMENU

Warning

Important Safety Instructions................

Buttons and interface location..............

............................

.....................

...............................

.....................

Function introduction
Effective range

External Equipment Connections ........

Switching ON/OFF the TV set...........

Choose the Menu Language.............

Tuning menu

.............

Manual ..............................

AFT(Auto Fine Tuning).....................

.......................................

Skip

Program swap.................................

.............................................

.......................

................................

Choose the Input Source.................

Program Table ........................

How to select the desired program.......

Front control panel

Rear control panel.......

Remote controller
Keys of remote controller

Operation

Set up your TV...................................

......................................

Auto search........................

search..

.......

Edit Name

...............................................

Picture Adjustment

T ............................................

Lock setup..............................................

Teletext functions....................................

Maintenance...........................................

.....................

......................................

.................................

AdjustmentSound ...................................

ime setting

Function menu........................................

Adjust menu ...........................................

Other functions.......................................

Specifications and functions
Troubleshooting

1
2
5
5
6
7
8
8
9
10

11
15
15
15
16
16
17
17
18
19
20
20
21

22
23
25
26
27
29
31
32
34
35
36

Front control panel

-This is a simplified representation of front panel.

-Here shown may be somewhat different from your TV.

1. Power

2.CH- /CH+
Program plus and minus, menu options

3.VOL-/VOL+
Volume increase and decrease, menu reset and entry

4.MENU
Menu display

5.TV/AV: Source input select

6. Remote control signal receive window.

7.Remote Indicator
In red when standby mode, in blue when Display.

Buttons and interface location

1

TV/A V

MENU

3

2

5
4

6

7

VOL-

VOL+

CH-

CH+

POWER

HDMI/DVI Input

Connect the monitor
output connector from
a DVD player to the
appropriate input port.

ANT IN

HDMI/DVI
IN1

PC IN

Pr/CrPb/Cb

Y

IN2

SCART2

Y/C

SCART1

RGB

DVD/DTV Input

(Component )

Connect a component
video/audiodevice to
these jacks.

Buttons and interface location

Rear Control panel

Earphone jack:

Earphone audio
output terminal.

PC VIDEO Input

Connect the monitor
output connector from
a PC to the jack

Antenna Input

Connect cable or antenna signals
to the TV, either directly or through
your cable box.

SCART2 Input

Connect Scart
out from an Scart
device to the
Scart input.

Audio input

for linking DVI/PC
audio output terminals.

VIDEO

AUDIO

AUDIO Input

connect to hear

stereo sound from an

external device.

VIDEO Input

Connects the video signal

from a video device.

R

L

HDMI/DVI
IN2

AC IN

Pr/CrPb/Cb

Y

IN1

HD-AUDIO

HD-AUDIO

PC/DVI
AUDIO IN

Audio input

for linking YPbPr/YCbCr
audio output terminals.

Power Cord Socket

This TV operates on AC

power. The voltage is

indicated on the

Specifications page.

Never attempt to operate

the TV on DC power.

SCART1 Input

(Canal+)

Connect Scart
out from an scart
device to the scart
input.

Remote control

Precautions

3.Replace the cover of the

battery compartment.

Make sure that there is no obstacle between
the remote controller and television set.

As strong light may interfere the
signals, change your position to
operate the remote controller if
the television cannot be turned
on or off as you expect.

Keep the remote controller away from
heat source or humid area to ensure
effective performance of the remote
controller.

Make sure that two AA alkaline batteries

are loaded. The batteries must be of the

same type. The batteries must be located

properly. The batteries are not

rechargeable.

1.Slide open the

cover of the battery
compartment on the
back of the remote
controller.

2.Load two AA alkaline

batteries in the compartment.

(plus and minus

poles to respective mark)

paying attention to the polarity
diagram in the battery
compartment.

Inserting Batteries

7

STILL

SLEEP PIP

TV/AV

P.STD S.STD

H.LOCK

CH.LIST EXIT

SCAN

SWAP

TIMER ZOOM

ABC@

DEF

JKL%

GHI$ MNO

STUVPQR& WXYZ

*#()

MUTE

DISPLAY

CH+

CH-

VOL-

VOL+

MENU

Keys of remote control

STILL

Picture static

I/II (NICAM)

MUTE

Switches the sound on or off

Power Off/Standby

any other programmed
equipment off.

SCAN

Program scan button

DISPLAY

Display ON/OFF

SLEEP

Displaying sleep time,

adjustable

PIP(No available)

Digits

Program direct option(when edit
program, every press can set
different sign by turns among the
digits and sign on top of them)

TV/AV

Input source display

SWAP

Switch the current channel to the
last channel you have viewed.

P.STD

(Picture mode option)

S.STD

(Sound mode option)

Program up and down
or turns your TV on.

Teletext buttons

buttons which have letters

on top also can use in TV.

Lock button

(enter the Lock Set menu)

Channel list button

EXIT

clears all on-screen displays and
returns to TV viewing from any menu.

TIMER

Time display(only when

there is teletext in TV)

ZOOM

Adjust picture aspect ratio

Note:

This User's Manual covers the functions of the remote controller, including CH+/-,
VOL-/+, MENU, TV/AV and POWER keys for control of program up, program down,
volume decrease, volume increase, menu, TV/AV and power ON/OFF.

MENU

main menu entry, menu exit or
return to next higher level menu.

sound increase

and decrease

- The remote controller cannot be operated unless the batteries are properly loaded.

Function introduction

- When using the remote control, aim it at the remote control sensor on the TV.

Ensure the remote control is pointed toward the remote control window on

the display.

No obstacles should be placed between the remote control and the remote

control window.

The effective receiving scope for the signal is 8 meters to the front of the

OO

remote control window, and 45 to the left or right side and 20 above or below
the control window.

Use of remote control:

1. To ensure a normal operation, the remote controller should not be dropped

or damaged in any way .
It should also be kept dry and away from all heat sources.

2. Battery replacement is necessary when the remote control acts

inconsistently or stops operating the LCD display.

Remote control

Effective range

above

below

20
20

-Here showns may be somewhat different from your TV, is only the graphic solution, please
take material object as.

left

right

front 8m

45

45

Generally speaking, to enjoy a clearer picture, we recommend that you use a
CATV system or an outdoor antenna .In different places, the suitable antenna
type and position are different.

Mixer

additional

purchase

Note
* It is recommended that you'd better use 75

* Don't bind antenna cable and electric wire together.

coaxial cable to remove the

disturbance caused by airwave.

ANT IN

outdoor
antenna

300 twin-lead cable

Antenna adapter

75 coaxial cable

Plug
(additional purchase)

Antenna input

75 standard

coaxial type

External Equipment Connections

If the antenna needs to be split for two Tv`s, install a

2-WaySignal Splitter in the connections.

If the antenna is not installed properly, contact your

dealer for assistance.

To improve picture quality in a poor signal area,

purchase and install a signal amplifier.

Antenna Connection

ANT IN

SCART2

Y/C

SCART1

RGB

HD-AUDIO

HD-AUDIO

PC/DVI
AUDIO IN

External Equipment Connection

- To avoid picture noise (interference), leave an adequate distance between the VCR
And TV.

VCR connection

NOTE: All cables shown are not included with the TV.

1. Connect the SCART cables from

the VCR's output jacks to the TV`s
input jacks, as shown in the figure.

2. Insert a video tape into the VCR and

press PLAY on the VCR. (Refer to the VCR
owner`s manual.)

3. Select the input source

by the TV/AV button
on the remote control.

S-VIDEO

Choose Your Connection

There are several ways to connect your television, depending on the components you
want to connect and the quality of the signal you want to achieve. The following are
examples of some ways to connect your TV.
Choose the connection which is best for you.