Haier L2627 Owner's Manual
Please READ this manual carefully before
operating your TV, and retain it for future
reference.
TFT-LCD TV
OWNER S MANUAL'
2 TV LCD-TFT
Warning
RISK ELECTRIC SHOCK
DO NOT OPEN
CAUTION
!!
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle is intended to alert the user to the
presence of uninsulated dangerous voltage within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
!!
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the
risk of electric shock, do not perform any servicing other than that contained in the operating instructions
unless you are qualified to do so.
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,
or sold with the apparatus. When a cart is used, use caution when moving the cart/
Apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged
in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15)The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases,
shall be placed on the apparatus.
16)The mains plug or appliance inlet is used as the disconnect device, remain it readily operable during the
apparatus normal use.
Class I apparatus shall be connected to a mains socket outlet with a protective earthing connection.
Owner s Manual 3
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rule. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, use and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However there is no
guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encourage to
try to correct the interference by one or more of the following measures:
*Reorient or relocate the receiving antenna.
*Increase the separation between the equipment and receiver.
*Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
*Consult the dealer or an experienced radio/TV technician for help.
This device compiles with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may be not cause harmful interference.
(2) this device must accept any interference received, including interference that may cause undesired
operation.
FCC CAUTION:
To assure continued compliance and possible undesirable interference, the provided ferrite cores must be
used when connecting this LCD display to video equipment; and maintain at least 40cm spacing to other
peripheral device.
CANADIAN NOTICE:
This Class B digital apparatus compiles with Canadian ICES-003.
FCC STATEMENT
Safety Instructions
4 TV LCD-TFT
Safety Instructions
SAVE THESE INSTRUCTIONS
Thank you for purchasing the product. This easy-to-use manual will guide you in getting the best use of your
product. Remember to record the model and serial number. They are on label in back of the unit.
Model number
serial number
Date of purchase
Staple your receipt to your manual. You will need it to obtain warranty service.
Introduction
Owner s Manual 5
War ni ng . . . . . . . . .. .... .. .. .. . . . . . . . . . . . . . . . . . . . . . .
Safe ty I ns tr uc ti on s . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction
Cont ro ls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. .. .. .. .
Conn ec ti on O pt io ns . . . . . . . . . . . . . . . . . . . . . . .. .. .. ..
Universal Remote Control . ............ . . . . . . . . ........
Installation
Acce ss or ie s . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. .. .. ..
Antenna Connection . . . . . . . . . . ..........................
VCR Connection. . . . . . . . . . . . . . . . . . . . . ..............
External A/V Source Setup . . . . .. . . . . ..................
DVD Connection . . . . . ...... . . . . . . . . . . . . . ...........
DTV Connection..................................................
Digital Audio Output . . . . . . . . . . . . . . . . . . . . ...........
PC Connection. . . . . . . . . . . . . . . . . . . . . . . .............
HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. .. .. .. .. .. ..
Cable sample.....................................................
Connecting Headphones . . . . . . . . . . . . . . . . . . . .....
Power source................ . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
Operation
Switching On/Off the TV set . . . . . ... . . . . . . . . . . ....
Choose the Menu Language . . . . ..... ...................
Choose the input source......................................
Channel Menu
Auto ma ti c Sc an . . . . .. .. .. . . . . . . . . . . . . . . . . . . . . . .. .
Add Channel Scan............... . . . . . . . . . . . . . . . . . . .
Rena me . .. .. .. .. .. .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .. . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Video Menu
Audio Menu
SAP Broadcasts Setup.........................................
Take the table stand off
Select the desired program
Select the desired sound
Mute
How to select picture mode..................................
How to customize your own picture status .............
How to select audio mode.....................................
How to customize your own audio status ...............
Time Menu
Function Menu
Menu Language...................................................
DTV Caption Style...............................................
.......................................................
...............................................
...................................................................
Menu
Screen Setup for Component or PC mode..............
Lock Menu
Parental Control rating and categories...................
Lock setup...........................................................
Other Functions
Brie f In fo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. .. .. .. .. ..
Aspect Ratio Control . . . . . . . . . . . . . . . . . . . . ... . .. . .
CC (Closed Caption Display) . . . . . . . . . . . . . ... . .. .
Maintenance . . .... .. . . . . . . . . . . . . . . . . . . . . . . . . . .
Product Specifications . . . . . . . . . . . . . . . . . . . . . . .
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . ..
Date /Time setting................................................
Time zone setting.................................................
Sleep Timer setting..............................................
Timer on setting...................................................
Timer off setting...................................................
OSD Timeout
OSD Transparency
DNR
Adjust
Quick program view.............................................
Remote Control
Setting up your remote control .............................
Remote Control Codes ........................................
2
3
6
7
8
9
9
10
11
11
12
12
13
14
15
16
16
17
18
18
18
19
20
20
21
21
21
22
22
23
23
24
24
25
25
26
26
26
27
28
28
28
28
29
30
32
32
33
33
34
36
40
41
42
Contents
Introduction
6 TV LCD-TFT
Front panel controls
This is a simplified representation of front panel.
Here shown may be somewhat different from your TV.
Controls
1
INPUT
2
3
4
5
MENU
CH+
VOL+
CH-
VOL-
POWER
1.INPUT: Press to show the input source mode. In the MENU/INPUT screen,
these buttons serve as OK buttons.
2.CH : Press to scan through channels. To scan quickly through channels,
press and hold down either +/- . In the MENU screen, these buttons
serve as up/down buttons.
3.VOL : Press to adjust the volume .In the MENU screen, these buttons
serve as left/right buttons.
4.MENU: Menu display.
5.POWER: Press to turn on and off the TV.
-/+
-/+
VIDEO
AUDIO
AV3 AUDIO Input
connect to hear
stereo sound from an
external device.
AV3 VIDEO Input
Connects the video signal
from a video device.
Headphone jack
Headphone audio
output terminal.
R
L
Introduction
Owner s Manual 7
Back panel controls
Connection Options
HDMI/DVI IN 1 HDMI/DVI IN 2
PC IN
AC IN
VIDEO
Pr
Pb
Y
Pr
Pb
Y
OPTICAL
PC/DVI
AUDIO IN
L R
AUDIO
S-VIDEO
ANT IN
COMPONENT IN
AV IN
Video
L R
Video
L R
L R
1
2
3
4
5
6
7
8
9
10
11
Power Cord Socket
This TV operates on AC power.
The voltage is indicated on the Specifications page. Never attempt to operate the TV on
DC power.
Digital Audio Output
Connect digital audio from various types of equipment.
Note: In standby mode, these ports will not work.
S-Video Input
Connect S-Video out from an S-VIDEO device to theS-VIDEO input.
Antenna Input
Connect cable or antenna signals to the TV, either directly or through your cable box.
HDMI
Connect a signal to HDMI/DVI.
PC VIDEO Input
Connect the monitor output connector from a PC to the jack
DVD/DTV Input (Component )
Connect a component video device to these jacks.
PC/DVI Audio Input
Connect the audio out from the external device, used while linking PC audio frequency
output terminalsor using a DVI to HDMI connector.
COMPONENT AUDIO Input
Connect to hear stereo sound from an external device.
VIDEO Input
Connects the video signal from a video device.
AUDIO Input
Connect to hear stereo sound from an external device.
Introduction
8 TV LCD-TFT
1 POWER
.
2 CH.LIST
Open the channel list.
3
TV:Press to enter TV signal;
VIDEO:Press to enter VIDEO signal;
S-VIDEO: Press to enter S-VIDEO signal;
: Press to enter COMPONENT signal.
4
5 P.MODE
Selects the picture mode appropriate
for the program's character.
6 CC(closed caption)
Select a closed caption.
7 TIME
Shows time.
8 MENU
Brings up the main menu to the screen.
9 EXIT
Clears all on-screen displays and returns to TV viewing
from any menu.
10 ARC(Aspect Ratio Control)
Changes the aspect ratio.
11 MUTE
Switches the sound on or off.
12 VOLUME UP/DOWN
Press to adjust the volume.
13 Numeric buttons
Press to change the channel.
14 - button
Press to select additional channels (digital )being
broadcast by the same station. For example, to select
channel“54-3”, press “54”, then press “-” and “3”.
15 TV DVD VCR SETBOX CABLE AUDIO
Press the SELECT button repeatedly to select
one of the system modes in which the remote
control can be used. When the desired device is
selected, the corresponding LED lights on 5 seconds.
16 PC
Press to enter PC signal.
17 HDMI
Press to enter HDMI signal.
18 S.MODE
Selects the sound mode appropriate for the program's
character.
19 FREEZE
Freezes the currently-viewed picture, but audio continues.
Press FREEZE button again to resume the normal picture.
20
INFO
When you watch the TV, press the key, the information
displays on top of the screen.
22
Displays the Sleep Timer option.
24 SAP
Selects MTS sound: Mono, Stereo, and SAP in Analog
mode. Change the audio language in DTV mode.
25
CHANNEL UP/DOWN
Q.VIEW
Switch the current channel to the last channel you have
viewed.
Press to turn on and off the TV
VCR/DVD Functions
Control some video cassette recorders or DVD players.
/ Rewind / Fast / backward /Forward
Stop Play/Pause REC
INPUT
Show the input source mode.
21
THUMBSTICK (Up/Down/Left/Right/OK)
Allows you to navigate the on-screen menus and adjust
the system settings to your preference.
23 SLEEP button
LIGHT
Press the light button, white LED will be ON, release this
key, white LED will be OFF.
26
Press to scan through channels. To scan quickly through
channels, press and hold down either +/- .
27
Shortcut Button of Input
COMPONENT
The remote control cannot be operated unless the batteries are properly loaded.
Function introduction
When using the remote control, aim it at the remote control sensor on the TV.
Universal Remote Control
CH.LIST
VIDEO
S-VIDEO
COMPONENT
CC
P.MODE
S.MO DE
FREE ZE
E
N
U
TIM
E
NPUT
IN
FO
E
X
IT
R
A
C
S
A
P
S
L
E
E
P
VOL +
CH+
Q.VIEW
OK
VOL-
CH-
HDMI
SELECT
TV
PC
Installation
Owner s Manual 9
AV IN
Video
L R
Video
L R
S-VIDEO
ANT IN
ANT IN
Generally speaking, to enjoy a clearer picture, we recommend that you use a CATV system or an
outdoor antenna .
.
Over-the-air TV reception quality will depend on your antenna type, antenna
location and antenna positioning
External Equipment Connections
Antenna Connection
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
Wall Antenna
Socket
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
Outdoor
Antenna
VHF Antenna
UHF Antenna
Turn clockwise to tighten
RF Coaxial Wire (75 ohm)
Bronze Wire
Be careful not to bend the bronze wire
when connecting the antenna.
Bronze Wire
To improve the picture quality in a poor signal area,
please purchase a signal amplifier and install properly.
If the antenna needs to be split for two TV`s, install
a 2-Way Signal Splitter in the connections.
To install the antenna properly please contact a
professional in your area.
Accessories
Remote control
Owner`s manual
Alkaline battery(AAA) 2
Power cable
Please READ this manual carefully before
operating your TV, and retain it for future
reference.
TFT-LCD TV
OWNER S MANUAL'
CH.LIST
VIDEO
S-VIDEO
COMPONENT
CC
P.MODE
S.MODE
FREEZE
E
NU
T
IM
E
N
P
U
T
IN
F
O
E
X
I
T
R
A
C
S
A
P
S
L
E
E
P
VOL+
CH+
Q.VIEW
OK
VOL-
CH-
HDMI
SELECT
TV
PC
L R
AUDIO
S-VIDEO
ANT IN
AV IN
Video
L R
Video
L R
L R
VCR connection
NOTE: All cables shown are not included with the TV.
There are several ways to connect your television, depending on the components you want to connect
and the quality of the signal you want to achieve. The following are examples of some different ways
to connect your TV with different input sources.
External Equipment Connections
Choose Your Connection
To avoid picture noise (interference), leave an adequate distance between the VCR and TV
Connection Option 1
Set VCR output switch to channel 3 or 4 and
then tune the TV to the same channel number.
Connection Option 2
1. Connect the audio and video cables from the
VCR's output jacks to the TV input jacks, as
shown in the figure.
When connecting the TV to VCR, match the
jack colors (Video = yellow, Audio Left = white,
and Audio Right = red).
If you connect an S-VIDEO output from VCR to
the S-VIDEO input, the picture quality is
improved; compared to connecting a regular
VCR to the Video input.
2. Insert a video tape into the VCR and press
PLAY on the VCR. (Refer to the VCR owner`s
manual.)
3. Select the input source with using the
INPUT button on the remote control, and
then press / button to select the source,
press theOK button to confirm.
Installation
10 TV LCD-TFT
VIDEO
Pr
Pb
Y
Pr
Pb
Y
OPTICAL
PC/DVI
AUDIO IN
L R
AUDIO
S-VIDEO
COMPONENT IN
AV IN
Video
L R
Video
L R
L R
L R
AUDIO
S-VIDEO
ANT IN
AV IN
Video
L R
Video
L R
L R
How to connect
1. Connect the DVD video outputs (COMPONENT) to
the Y Pb Pr jacks on the TV and connect the DVD audio
outputs to the Y Pb Pr Audio IN jacks on the TV, as
shown in the figure.
2. If your DVD only has an S-VIDEO output jack,
connect this to the S-VIDEO input on the TV. as shown
in the figure.
Note
If your DVD player does not have component video
output, use S-Video.
How to use
1. Turn on the DVD player, insert a DVD.
2. Use the INPUT button on the remote control to select
Y Pb Pr mode.
3. Press Play button on external equipment for program
play.
4. Refer to the DVD player's manual for operating
instructions.
External Equipment Connections
How to connect
Connect the audio and video cables from the external
equipment's output jacks to the TV input jacks, as shown
in the figure. When connecting the TV to external equipment,
match the jack colors (Video = yellow, Audio Left = white,
and Audio Right = red).
How to use
1. Select the input source with using the INPUT button on
the remote control.
2. Press the / button to select the desired source.
3. Press the OK button to confirm.
4. Operate the corresponding external equipment.
Video Game Set
Camcorder
Component Input ports
To get better picture quality, connect a DVD player to the
component input ports as shown below.
Installation
Component ports
on the TV
Video output ports
on DVD player
Y Pb Pr
Y Pb Pr
Y B-Y R-Y
Y Cb Cr
Y P P
BR
Note
The audio input terminal of AV IN 1 is compared with S-VIDEO.
External A/V Source Setup
DVD connection
Owner s Manual 11
DVD
or
OPTICAL
L R
AUDIO
L R
HDMI/DVI IN 2
PC IN
VIDEO
Pr
Pb
Y
Pr
Pb
Y
OPTICAL
PC/DVI
AUDIO IN
L R
AUDIO
COMPONENT IN
L R
L R
Digital Set-top Box
This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do
receive Digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.
This TV supports HDCP (High-bandwidth Digital Contents Protection) protocol for Digital Contents (480p,720p,
1080i).
How to connect
Use the TV`s COMPONENT , PC or HDMI/DVI
jack for video connections, depending on
your set-top box connector. Then, make
the corresponding audio connections.
How to use
1. Turn on the digital set-top box. (Refer to the
owner`s manual for the digital set-top box.)
2. Use INPUT on the remote control to select
COMPONENT , PC or HDMI/DVI source.
Send the TV`s audio to external audio equipment (stereo system) via
the Digital Audio Output (Optical) port.
How to connect
1. Connect one end of an optical cable to the TV Digital Audio
(Optical) Output port.
2. Connect the other end of the optical cable to the digital audio (optical)
input on the audio equipment.
See the external audio equipment instruction manual for operation.
When connecting with external audio equipments, such as amplifers or
speakers, please turn the TV speakers off.
Note
Digital Audio Output
Caution: Do not look into the optical output port.
Looking at the laser beam may damage
your vision.
External Equipment Connections
DTV connection
Installation
Signal
480i
480p
720p
1080i
COMPONENT
HDMI/DVI
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
HDMI
12 TV LCD-TFT
HDMI/DVI IN 1 HDMI/DVI IN 2
PC IN
VIDEO
Pr
Pb
Y
Pr
Pb
Y
PC/DVI
AUDIO IN
How to connect
1. To get the best picture quality, adjust the PC graphics card to 1024
2. Use the TV`s PC or DVI (Digital Visual Interface)Audio IN port for video connections, depending on your PC
connector.
If the graphic card on the PC does not output analog and digital RGB simultaneously, connect only one of either PC
r HDMI/DVI IN to display the PC on the TV.
If the graphic card on the PC does output analog and digital RGB simultaneously, set the TV to eithe
DVI; (the other mode is set to Plug and Play automatically by the TV.)
3. Then, make the corresponding audio connection. If using a sound card, adjust the PC sound as required.
How to use
1. Turn on the PC and the TV.
2. Turn on the display by pressing the POWER button on the TV's remote control.
3. Use INPUT on the remote control to select PC or HDMI/DVI source.
4. Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or
brightness in PC mode. If noise is present, change the PC mode to another resolution, change the refresh rate to
another rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC
graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card.
Note
1.Use a DVI cable.
2.Avoid keeping a fixed image on the TV's screen for a long period of time. The fixed image may become permanently
imprinted on the screen.
3. The synchronization input form for Horizontal and Vertical frequencies is separate.
x768 .
IN o
r PC or
HDMI/
Resolution
Frame
frequency
(Hz)
VGA
SVGA
XGA
640*480
60Hz
800*600
1024*768
60Hz
60Hz
Mode
Resolution
External Equipment Connections
Installation
75Hz
75Hz
PC connection
Owner s Manual 13
Loading...