Haier HWM-6.5 User Manual
Fuzzy Computerized Automatic
Washing Machine
User's manual
This manual is for
HWM-6.5/S
Please read this manual
carefully before using.
Retain it for future reference.
Names of the parts................................................................................................1
Safety precautions ............................................................................................. 2
Installation and adjustment ...................................................................................4
Preparation before washing .................................................................................8
Put in the laundries .............................................................................................. 9
Usage of the detergent ........................................................................................ 9
Use the operation buttons ................................................................................. .10
Close the top lid ................................................................................................. 14
Finish washing ....................................................................................................14
Disposal after washing .................................................................................... ...15
Trouble shooting Answer to questions........................................................ .....16
Packing list *Specification..................................................................................... ...17
Contents
1. Heating function can be selected for " Normal", "Jeans", "Gentle"
and"Quick" programs, but it's unavailable for "Rinse"process.
2. If heating function is selected, for water levels
"1"or "2", it begins to heat
after water reaches the set level, and begins to wash when the set temperature
is reached; for water levels
"3"-"6", it begins to heat upon water reaching level
"2", it continues water supply and gently agitates while heating to the set
temperature, then it begins normal washing; for water levels above
"6", the
cycle is: after water reaching level
"2", it begins to heat, meanwhile water
supply continues until level
"6", water supply stops and it continues heating to
the set temperature, then it begins to wash while water supply is resuming,
(the hot water temperature then is good for detergent active enzyme function
and for the clothes to be in an optimum detergent concentration with a good
washing effect. The subsequent washing while water supply can facilitate dirt
flushing and removing), water supply stops when reaching the set level, then it
continues to wash normally. For high water levels, only the water amount
below level
"6" can be heated to the set temperature, then it washes and
supplements water to the set level
3. This washing machine provides 3 temperature selections of 20 , 30 and
40 .
Description of heating function
Meaning and description of the symbols
Names of the parts
Warning sign
Forbidden sign
Contents marked with that symbol are related to the safety
of the product and the personal safety of the users. Please
operate in strict conformity to the contents, otherwise it may
cause damage of the machine or injure the personal safety
of the user.
Contents marked with that symbol are actions forbidden to
perform. Performing of those actions may result in damage
of the machine or injure the personal safety of the user.
Adjustable foot
fixed foot (3)
back cover
Cabinet
base frame
Drain hose
Control panel film
Control panel
Filter cover
Power line
Pulsator
Inner tub
Detergent box
Top lid B
Cabinet handle
Water valve
Top lid A
Lint filter(Installed by user)
Lint filterA(Installed by user)
Water absorption cushion
1
Safety precautions
Do not damage the power cord, bend ,extend, twist, bind or alter it by force. Do not press or
nip it with weight. If the power cord or the power plug is bad, or the power plug becomes
flexible, to avoid risk it is required to have it replaced by the technicians of our special
shop or the after-sale service department. Keep the pin of the power plug clean, if the
power plug is polluted with dust, please wipe with dry cloth carefully.
The power cord plug should be convenient
to be pluged in or pluged out with hand
while the washing machine runs normally.
Be sure to pull the plug out and close the
water tap when the machine is idle, when
moving the machine, or when cleaning
the machine. Do not use wet hand to insert or pull out the power plug.
In case the washing machine is installed
on ground with carpet, do not block the
ventilation hole with carpet.
Do not let the machine share one receptacle with other
electric appliances. If the power plug is damaged, or
the plugging into the receptacle is loose,
do not use the plug any more.
Do not wash water-proof laundries like
the raincoat, bike covers etc. to avoid
abnormal vibrations in spinning.
Do not use water hotter above 50 C .
Do not put the machine at damp place like
the bathroom. Never wash it with water.
Not put wet laundries on the control panel.
soft items
The ventilation holes
at the bottom
Please insert the power cord into special
receptacle with rated voltage. Be sure to
use single-phasethree pins receptacle.
Ensure the earthing prong of the power
receptacle is earth edreliably. Use leakage
protector if possible.
2
Safety precautions
Do not decompose, repair or alter the
machine by yourself.
Do not put any hot or heavy items (such
as the kettle with hot water ) on the
washing machine.
Do not wash laundries with volatile
materials (such as thinner, petrol etc.)
The handicapped or children without
care shall not use the machine.
Keep the machine away from direct
sunlight and heat source like the heater.
Do not stretch hands into the working
machine. It is dangerous even if the
rotation is slow. Take special care of
the children. Do not let the children
climb the washing machine.
Pe
trol
Thi
nne
r
3
Installation and adjustment
The largest allowed slope of the
shank base of the machine is 2 .
The slanting or rough ground will
result in unstable running or
stoppage of the machine. Please
adjust it with following methods:
Adjust the adjustable foot:
Install the bottom plate
After you open the package, please lean
the washing machine gently down on soft
items ( like the towel cloth, blanket, etc. ).
Install the bottom plate to the bottom of the
machine with the eight screws by a cross
screwdriver, then lift the machine up gently.
See to the figure:
Adjust the installation position
Please install and adjust the machine according to the requirement of the manual. It is
very important to your security and correct operating the machine.
1.To twist the adjustable foot, please
first lift up the side of the foot slightly,
loosen the adjustable nut, and twist
the foot.
2.Fasten the nut after adjustment.
Loosen
Fasten
High
Low
adjustable nut
adjustable foot
Back
Front
Bottom plate
Screw
Soft items
Install the lint filter
Install
Push lint filter downward to l .ocation for lint filter
Install
4
Loading...