Haier HWM1270KFL User Manual

Automatic Drum Washing Machine

HWM1270KFL

Operation Manual

Table of Contents

Before using the appliance

Name of parts...inside front cover

Matters needing attention......1-3

Installation.............................4-5

Function ...............................6-7

How to operate the washing machine

Program description table........8

Preparation .............................9

Washing Procedure ..........10-11

Maintenance

Maintenance ..........................12

Troubleshooting Guide ..........13

Technical Specifications ........14

Wiring Circuit .........................15

Matters Needing Attention

ƽ Safety

.A separate earthed socket is required for the



power supply. The washing machine must be
positioned so that the plug is accessible.

2. Hold the plug and not the electric cable when

unplugging the washing machine.

3.Fuses in the power circuit should be rated for 15A.

If the supply cord is damaged, it must be replaced

by the manufacturer, a service agent or a

qualified persons in order to avoid a hazard.

5.Do not use flammable detergent or dry clean
ing agent; Do not use flammable spray in close
vicinity to the washing machine; Do not remove
or insert the plug in the presence of flammable

gas.



Keep children away from the packing materials after unpacked.

The appliance is not instruct for use of young children of infirm

persons without supervision. Young children should be supervised

to ensure that they do not play with the appliance.

Ensure carpet does not obstruct the opening in the bases.

4. Do not touch or use the washing machine when

bare-footed or when your hands or feet are wet.

6. The door of the washing machine will become hot
during the heating process. Avoid contact with the
door during the heating process. For safety, keep
children away from the washing machine.



Wiring Circuit

Matters Needing Attention

Power Switch

Door Lock

Motor

HWM1270KFL

L

N

O1

J12-3

O2

J12-4

D1

J12-11

D2

J12-12

J12-4

D3

B1

M1

M

B2

M2
M3B3

M4B4
M5

B5

M6

G

B6

B7

M7

J12-5

L1

Pressure Switch Heating Element

Power Drive PCB

J12-6

L2

L3

H1

H2

8.The washing machine should not be installed

outdoors or in a damp place. In the event of water

9. The carpet must not obstruct the ventilation

openings in the base of the washing machine.

leakage or splashes allow the machine to dry

naturally.

ST-1

Display PCB

ST-2
ST-3
ST-4
ST-5
ST-6
ST-7
ST-8

N1

J12-1
J12-2

N2

VH1

P1

P2

VH2

V1
V2

J12-11
J12-5

J12-7
J12-8
J12-9

J12-10

ST-9

Thermostat

Drain Pump

Electronic Wash Switch

10.Keep away from heat sources and direct sunlight

to prevent plastic and rubber components from

aging.

11.During installation, ensure that the electric

cable is not trapped by the washing machine

and avoid damage to the electric cable.

15

Haier Indesit(Qingdao) Washing Machine Co., Ltd.

Haier Hi-Tech Zone, Haier Road Qingdao Shandong 266101 P.R. China

During Use

1. Before use, check the joins on the filling hose,

the tap and the drainage hose for possible

problems from water pressure fluctuations.

If joints are loose or there is leakage, turn

off the tap and repair. Do not use the washing

machine until the hoses are properly fixed.

Keep the door slightly open when the washing

2.

machine is not in use to prevent formation of

odors. Do not cover the washing machine in a

way where dampness can occur inside the

machine.

2