Haier HWM 120 - BS, HWM120-AS User Manual

QA Passed

QA

Passed

Inspired living

OPERATING MANUAL

Double-Tub Washing Machine

HNR Company (Pvt) Ltd.

Head Office : 63/B, Mega Tower Main Buleward, Gulberg-III, Lahore.

UAN: 11 11 HAIER (42437) Tel: 042 - 35879105 - 7

[e-mail] www.haier.com.pk

HWM 120 - AS
HWM 120 - BS

(Transparent outer cover)

Please read this manual
carefully before use.

Retain it for future reference.

Warranty Card inside.

LAHORE

92-B, Sharif Colony,
Iftikhar Ahmed
Malik Road
Tel: [phone]

Service Centres

KARACHI

C-16 Block#.5
Rashid Minhas Road
Nr. NIPA Chorangi
Tel: [phone]

GUJRAT

Tariq Plaza Nr. Bandan
Marriage Hall,
Rahman Shaheed Road
Tel: [phone]

LAHORE (2)

62-2-C-2
Town Ship
Tel: [phone]

PESHAWAR

Haier Plaza
G.T Road
Nr. Haji Camp
Tel: [phone]

MULTAN

178-A Shamsabad,
Eidgah Road,
Tel: [phone]

QUETTA

Banglow # 4-29/1
Mir Ahmed Khan Road
Tel: [phone]

FAISALABAD

36 / 8 New Civil Lines
Behind State bank of
Pakistan
Tel: [phone]

KARACHI (2)

C-21,Sector 31 E
Lakhnow Co operative
Housing Society Korangi
Road, Near Nasir Jump
Tel: [phone]

RAWALPINDI

951 - B, near kali tanki,
Opp. MC girls high
school, Satellite town,
Tel: [phone]

BAHAWALPUR

H.No.44/278 Central
Jail Road, Arif Town
Tel: [phone]

SUKKUR

Banglow No.C473/2
Queens Road
Tel: [phone]

SARGODHA

67 A Shahzad Park
P.A.F Road
Tel: [phone]

SAHIWAL

66/E Scheme # 2 Near
Cakes & Bakes, College
Chowk, Farid Town.
Tel: [phone]

GUJRANWALA

GMS Area Bismillah
Market, G.T Road
Opp. Gold Marriage Hall
Tel: [phone]

SIALKOT

Al-Hadi Town, Defence Road,
Pakka Peyya Stop,
Opp. Mehar CNG,
Tel: [phone]

HYDERABAD

Banglow No.342/A
Block # 6,
Latif abad # 6,
Tel: [phone]

JHELUM

Major Nawaz Shaheed
Colony, Mehdi
Shaheed Road
Tel: [phone],627231

D.G KHAN

House # 4, Block No. 17,
Street No. 4,
Laghari Colony
Tel: [phone]

UAN: 11 11 HAIER (42437)

[e-mail]

www.haier.com.pk

Before Using

Drain selector

Wash Selector

Wash timer
water-filling

entrance

water-filling
translation

Control panel

Bypass channel
Water level

adjusting lever
Overflow filter
Lint filter
Drain hose
Pulsator
Cabinet handle

Wash tub cover

Base frame

Name of Parts

Outer cover of
the spin tub

Inner cover of
the spin tub

Spin timer

Spin tub frame

Spin tub

Cabinet

Before Using











Be sure to earth the earthing wire
reliably. Do not connect the earth
terminal to the gas pipe and tap water
pipe.

If the power cord is bad, to avoid risk
it is required to replace it by the
technicians of our special shop or the
after-sale service department. Keep
the pin of the Power Plug clean.















Safety Precautions

á`äЬå¢BT~á



`ã°z;VåZgB»ñ@*Z¼u

áu»Z0+6:gìXZgBÆa0*U$c*0*ã»

When the machine is normally using,

0*U$CÙ¦/ZEw:,X

please put the power plug at the location
easily to be inserted and extracted by
hand. Be sure to pull the plug off when
there's power failure, or the machine is
being moved, cleaned or when it is idle.

Note: All illustrations in this manual are given for reference only. Your products and

accessories may show differences from these illustrations due to our
continuous improvement.

Meaning and Description of the Symbols

Contents marked with that symbol are related to the safety of the
product and the personal safety of the users. Please operate in strict

Warning sign

Forbidding sign

Please check if the power receptacle has good earthing condition before using to
guarantee your safety.

conformity to the contents. Otherwise it may cause damage of the
machine or injure the personal safety of the user.

Contents marked with that symbol are action forbidden to perform.
Performing of those action may result in damage of the machine or
influence the personal safety of the users.

1

In case the washing machine is installed
on ground with carpet, do not block the
ventilation hole with carpet.

Ventilation hole at the
bottom of the washing
machine

Do not put the machine at damp place like
the bathroom. Never wash it with water.
Do not place wet laundries on the control
panel.

O

Do not use water hotter than 50 C

Do not share one receptacle with other
electric appliances. Do no use it in case
that the power plug is damaged or the
inserting into the receptacle is loos.

O

2

Before Using

To prevent your laundries and washing
machine from damage, be sure to take
out all of the foreign materials from your
pocket, such as coins, button, sand or
hair pins etc.

Do not stretch hands into the working
machine. It is dangerous even if the
rotation is slow. Take special care of the
children.

Do not put any hot or heavy items (such
as the kettle with hot water) on the
washing machine.

Safety Precautions

Keep the machine away from direct
sunlight and heat source like the heater.

Do not decompose, repair or alter the
machine by your self.

Do not wash laundries with volatile
material (such as thinner, petrol etc.)

l

ro

t

e

r

e

n

P

n

i

h

T

Before Using

Please install and adjust the machine
according to the requirement of the
manual. It is very important to your
security and correct operating the
machine.

Installation and adjustment

Install the lint filter

After opening the package, please
take out the lint filter from the
document bag, install it to the
overflow filter of the wash tub. See
to the figure.

Install the water inlet hose;
Select the water level

Insert the water inlet hose into the
water-filling entrance on the control
panel directly. (pull it out to dismantle
it)

Select water level according to the
quantity of the laundries.

Set the water level adjusting level to
needed line.

Do not wash water-proof laundries such
as the raincoat, bicycle shelter etc. To
av o i d a b n orm a l vibr a t ion du r ing
spinning.

O

Before washing, please check if the water tap is open,
and if the water inlet pipe is connected properly. It is
suggested to use low-foaming washing powder. Please
don't use washer in the environment below 0 C. If you do
than water will be frozen in the inlet & draining system. If

O

the below 0 C, please be sure to ensure the water is
placed under the room temperature for 2 ~ 4 hours and
then use.

O

3

4

Before Using

Installation and adjustment

Before Using

Installation and adjustment

Usage of the drain hose

The drainage shall be smooth with
the drain hose.

1.

The height of the drain hose shall be less
than 10cm, or the drainage will not be
smooth enough and cause incomplete
drainage.

2.

Do not tramp on or press the drain house.

If the drain hose is too long, cut it at mid

3.

point. To make smooth drainage, cut the
front end of the hose slantingly.

4.

If extra drain hose is needed, please
make separate purchase. The inner
diameter of the extra hose shall not less
than 30mm, and the length shall not
exceed 1.5m.

How to Change the direction
of the drain hose

-1

Figure 1 indicates the ex-factory installation

-1

-2

-3

1.

position of the drain hose.

Extend the drain hose from the side of spin tub

2.

Put soft items on the ground. Lean the machine
down gently with the front surface facing the
ground. Take off the drain hose from the cabinet.
Take the hose out of the fixing groove. (See to
Figure 2).

J-¦O$Å 3Ð1 Æ_. 3 eg+iÃ^

§sMm~ÎDYNX

Embed the drain hose into the groove along the

3.

side of the spin tub in the order of (1)~(3),
heading for the side of the spin tub. (See to
Figure 3).

-2

-3

4.

-4

Embed the drain hose into the groove with

4.

hands. Take care not to damage the drain hose
in fastening the fixing clamp.

5.

If extra drain hose is too long, cut it either
at point A or B.

-5

5 6

Using Process

Preparation before washing

Using Process

The musts in washing

Preparation before washing

1.

Conn ect the wate r inlet
hose.

Confirm that the washing

2.

machine is earthed reliably.
Than insert the power plug
into the receptacle. Do not
connect the earth terminal to
the gas pipe and tap water
pipe.
Put down the drain hose.

3.

Slanting or uneven ground

4.

may result in unsatiable
working or abnormal noise.
Please make the machine
stand horizontally.

Pay attention to followings before washing the laundries

Confirm if
there's special
requirement for
the laundries.

Clear the
pocket. Take
out the coins,
sand, hairpins
etc.

Fasten the
button and
zippers.

The quantity of
the laundries
shall not
exceed the
rated value.
The big
laundries like
the jeans shall
be put in
loosely.

When the
pulsator is
running, the
buttons of the
laundries may
cause noise.
For the sake of
discretion,
please put the
laundries with
buttons into
other laundries.

19

-1

-2

The capacity of washing and spinning of the machine
refer to the largest weight of the standard laundries

-3

-4

under dry condition that can be washed or spin in one
time. Laundries quantity in one washing cycle shall be
lower than the rated capacity. The largest capacity of
this machine is given page #.

The thickness, size, type of the cloth will influence the
actual washing capacity. It is suitable to put in
reasonable amount of laundries and the laundries can
be turned round in washing for on time washing.

Do not select "Maximum" water level for laundries less
than 2-3kg, so as to avoid splashing of water.

Reference weight of the laundries

Working suit (up, down)

(cotton, about 1120g)

Blanket

(cotton, about 900g)

Pajamas

(about 200g)

Shirt

(cotton, about

300g)

Undershirt

(cotton, about

180g)

Underpants

(cotton, about 70g)

Jeans (about 800g)

Single bed sheet

(cotton, about 600g)

Socking

(blending, about 50g)

Blending coat

about 800g

Jacket

(cotton, about 800g)

7 8

Using Process

Usage of the detergent

Using Process

Washing sequence

How to use the whitener

Fill water to decided level. Dilute the whitener with container. Pour it slowly into the
washing tub.
Avoid using whitener on laundries with color or pattern as they are prone to lose color.
The whitener shall not touch the laundries directly.
Refer to the user's manual for the usage and quantity of the whitener.
For powder whitener, please dissolve it before using.

-1

-2

-3

-1

-2

How to use the washing powder

Direct dissolved in the machine:

1. Fill small quantity of water.

2. Add the powder. Run for 30 seconds to dissolve it completely.

3. Put it in the laundries. Select suitable water level.

The instant dissolving of the washing powder:

1. Prepare warm water of 30 C and a container.

2. Add the powder while stirring to fully dissolve it.
The powder is more prone to pollute the laundries than the detergent. Therefore
please use it with proper quantity.
It is suggested not to use high sudsing detergent.
Dosage of different washing powder is different. Please refer to the instruction of
the washing powder for the detail dosage.

O

9

3

6

Intensity selection

Intensity selection

(Intensity can be,
standard or soft)

STANDARD

SOFT

Wash timer

Wash timer

(If to set less than 2 min,
you should first surpass 6 min
and then turn back.)

OFF

15

12

WASH TIMER WASH SELECTOR

9

Wash

1. Fill selection

(1) Set fill selection to "Wash side" (Figure 1)
(2) Adjust water level rod to a position as needed.

Fill water and add solved powder detergent

2.
until water reaches a suitable level.
It begin to wash to dispense detergent uniformly.

Put in the wash load, and supplement water

3.
as necessary.

Select intensity

4.
Select Normal, intense or Jeans water flow
Intensity according to wash load, (Figure 3)

Select wash time (Figure 4)

5.
Select wash time according to wash load.

After completion of wash, please set drain

6.
switch at Drain position. (Figure 5)

SOFT

WASH SELECTOR

Figure 1

Figure 2

Washing time Current

8-10

13-10

7-13

2-4
3-6

Figure 3

Laundries

Cotton, Blending, Linen
Very dirty and thick
Bed sheet
Silk (thin laundries)
Chemical fiber Knitwear

Drain switch Spin timer

Drain switch Spin timer

(Do not set drain switch
on Drain position druing
washing)

OFF

DRAIN

DRAIN SELECTOR

STANDARD

WASH TIMER

OFF

15

12

9

Figure 4

10

(If to set less than 1 min, in
order to ensure long service life,
please first surpass 2 min and
then turn back)

OFF

5

1

4

2

3

SPIN TIMER

(1)

(2)

3

6

DRAIN SELECTOR

Standard

Soft

OFF

Figure 5

-1

-2

-3

-4

-5

-6

DRAIN

Using Process

Washing sequence

Using Process

Washing sequence

Rinsing

Rinse with water-filling

Put the laundries into the wash tub. Select

1.

suitable current according to the laundries.

Adjust the water level

2.

Set the water level with water level adjusting
lever according to the laundries quantity.
Then fill suitable water continuously.

Rinse

3.

Adjust the wash timer to 2-3 minutes to do
rinsing.

(Repeat the midway spinning and
rinsing with stored water for 2-3 times)

Rinse with stored water

Put the laundries into the wash tub. Select

1.

suitable current according to the laundries.

Fill water to preset water level.

2.

Rinse

3.

Adjust the wash timer to 2-3 minutes to do
rinsing.

When the laundries quantity is below 2-3kg,
please us "STANDARD" current. If you use
"STRONG" current, it may splash.

Midway spinning

1. Put the laundries into the spin

tub evenly and smoothly.

2. Spin :

(1) Put the gland in properly.
Please put in the gland properly

2.

3.

1.

2.

even if the laundries quantity is
small.

(2) Close the inner and outer cover of the
spin tub.

(3) Spin for 1-2 minutes.

Push

Gland

Proper Proper

The laundries
are slanting

Push

No gland

Outer cover of
The spin tub

Inner cover of
The spin tub

3. Run the foam-removing spinning.

(1)

Set the water-filling selector control
rad at the "SPIN" side. Fill water for

3.

about 1 minute.
If the water quantity filled is to large,
the water may flow out from the wash
tub side. Please twist the water tap to
limit the water filling.
Close the outer cover of the spin tub.

(2)

Spin for 1-2 minutes.

-1

-2

(i)

(ii)

(iii)

WASH

SPIN

-3

(1)

(2)

WASH

11 12

SPIN

Using Process

Spinning

Washing sequence

Using Process

Disposal after washing

Put the laundries into the spin tub

1.

evenly and smoothly.

Press the gland in the tub properly.

2.

Close the inner and outer cover of the
spin tub.

Spin

3.

Select suitable spin time according to
the laundries, and do spinning.

During spinning, if there's abnormal
sound, it is generally owing to slanting
placement of the laundries. Please stop
the machine and re-order the laundries.

Note:

In spinning, it will pause the work if you
open the outer cover of the spin tub.
Close it to resume the spinning.
Selection of the Spin time list 3.

Laundries

bed sheet or
blanket

Underwear
(knitwear)

Swear
(chemical fiber)

Blending thin
laundries

Spin time
(minutes)

About 4~5

About 2~4

About 1~2

Within 1
minutes

-1

-2

-3

After using, please clean the lint and foreign materials of the lint filter and lint frame in
time. Otherwise it may influence your using the machine.

Please first pull the power plug from the receptacle before cleaning.

Cleaning the lint filter

The lint filter must be used during
washing.

It must be cleaned in time after each
using.

-1

Take off the lint filter

1.

Put hand at the indicated position.
Push down to take it off.
(See to Figure 1)

Clean the lint

2.

Put it in water and clean while it is still
wet. (See to Figure 2)

Install the lint filter
After cleaning, insert the bottom of

3.

the lint after filter (marked with
"DOWN SIDE") into the filter frame,
then push the upper part of the filter
i n ( m a r k e d w i t h
"UP SIDE").(See Figure 3)

-2

-3

To do spinning and draining or
ri n s i n g wi th w at e r - fi l l i n g
together, please first do spinning
for around 1 minute, then do
draining or rinsing with water­filling. Otherwise the spinning
will stop owing to too much water
stored in the spin tub.

13

Figure 1

Figure 2

14

Figure 3

Using Process

Disposal after washing

Using Process

Disposal after washing

Cleaning the frame filter

Too much lint on the overflow filter
will influence the normal usage of the
machine. Please clean it every two
months.

Take off the overflow filter

1.

As indicated in the figure, nip the
elastic fixing claw and pull it to the

direction of the arrow to take it off.

Take off the corrugation pipe.

2.

Dismantle the upper inside the
overflow filter (as indicated in
Figure1).

Clean the overflow filter

3.

Clean the lint around the filter and
flush with tap water.

Install the overflow filter

4.

(1) Install the corrugation pipe.
(2) Insert the mounting plate at the
bottom of the filter into original
position.
(3) Hang up the hook at the left upper
side.
(4) Push the upper part in as
indicated in Figure2.)

Water

level

adjusting lever

Pipe

1

Figure

Elastic fixing
claw

Hook

Figure 2

(4)

Disposal of the complete unit

1.

After washing, dismount the water
inlet hose.

2.

Do not store water in the tub for long
p e r i o d . D i s c h a r g e t h e

-1

wate r imm edi at ely afte r eac h
using.

Pull of the power plug and hang up

3.

the power cord.

-2

Hang up the drain hose.

4.

Wipe off the water drops on the

5.

surface and inside the tub with clean

-3

soft cloth.

6.

Open the cover of the wash for some
ti me ( abo u t one h our ) , then
close them.

-4

Wipe the complete unit with soft

7.

cloth twisted dry.

8.

Wipe with neutral detergent if too
dirty.

9.

Do not wash it directly by water.

10.

Do no wipe with thinner, petrol,
alcohol, etc.

Thinner

Petrol

Alcohol

-1

-2

-3

-4

-5

-6

-7

-8

-9

-10

15

16

Using Process

Trouble-shooting (Answers to questions)

When the remained water is frozen

Using Process

Trouble-shooting (Answers to questions)

Prevent the freezing

(Be sure to discharge the water completely after using)

After complete draining, set the "WASH SELECTOR" at "SOFT" or "STANDARD". If it is set an
"DRAIN", it will be rather difficult for the frozen water to melt.

When the water is frozen

Pour hot water below 50 C into the wash to soak it completely, Then turn the pulsator with hands
gently.

Please confirm the can work normally before next using.

O

O

Below 50 C

2-3L

If the laundries fall to the out side of the spin tub

If the laundries fal to the outer side of the spin tub, please take them out immediately.

1. Dismantle

As indicated in the figure, push the point marked with to pull the spin tub frame to oblique upwards to
dismantle it.

2. Install

After install the back edge of the spin tub frame to proper position, push the four points marked with "
" by force to reset it.

Spin tub frame

(If there's breakdown, please pull off the power plug before checking) The following
phenom ena are not breakdo wns some times . Please confirm again befo re
sending it to repair. If there are real breakdowns, please com to the special maintenance
department or after-sale service department of our company. Do not repair it by yourself.

Phenomena The reason

Is there power failure?

Is the power plug loose?

The machine does not act.

The drainage does not work

There's abnormal sound

during washing.

Th er e 's abno rm a l so und
and violent vibration during
spinning.

Is the pulsator twisted by foreign materials?

Is the drain hose put down?

Is the drain hose frozen?

Is the drain hose blocked by
foreign material?

Are there laundries falling
to the outer side of the spin tub?

Are there hair pin, coins or metal items brought
inside the tub?

Is the machine slanting?

Is the gland pressed evenly?

Are there laundries falling to the outer side
of spin tub?

Please check carefully. The laundries may fall to the lower part of the outer side of the spin tub (as
indicated in the figure.)

If the laundries fall to the outer side of the spin tub, during spinning the draining will get blocked
and the rotation speed of the spin tub is reduced.

Spin tub

Laundries

17

There may be some water
flowing out of the drain hose in
the first use of the machine.

Are the laundries in spin tub too much?

It is the water remained in the factory inspection
of performance.

18

Technical Information

Packing list

NameQuantity

One piece

User's manual

One piece

One piece

One piece

One set

Specification

Description

Power Source

Rated in put power (washing)

Rated in Put power (spining)

Water level/water level(bout)

Injection Pressure (Mpa)

Washing Capacity (Kg)

Spinning Capacity (Kg)

Weight

Size (mm)

Water inlet hose

Lint Filter

Gland

Twin-tub Washing machine

HWM120-AS/BS

220V

400W

180W

Max-99L,Med-79L,Min-59L

0.02~0.2

12.0 Kg

7.0 Kg

L928 W530 H995

37.5 Kg

19 20