Haier HWM110-23BS User Manual

Twin-tub Washing Machine

This manual is for

HWM110-23BS

User's manual

Please read this manual
carefully before using.
Retain it for future reference.

Contents

Names of the parts

Safety precautions

Installation and adjustment

Installation of the major function
Preparation before washing

The musts in washing

Usage of the detergent

Washing sequence

Disposal after washing

Trouble-Shooting Answer to question

Packing list *Specification

Names of the parts

Waterproof cover

Spin timer

Wash selector

Wash timer

Water-filling entrance cover
Water-filling entrance

Water-filling entrance

Water inlet selector handle

Control panel

Cascade outlet

Filter frame

Wash tub cover

Meaning and description of the symbols

Outer cover of the spin tub

Inner cover of the spin tub

Spin tub frame

Spin tub

Cabinet

Chassis

Contents marked with that symbol are related

Warning sign

to the safety of the product and the personal
safety of the users. Please operate in strict
conformity to the contents, otherwise it may
cause damage of the machine or injure the
personal safety of the user.

Forbidding sign

Contents marked with that symbol are actions
forbidden to perform. Performing of those
actions may result in damage of the machine
or injure the personal safety of the user.

Please check if the power receptacle has good earthing
condition before using to guarantee your safety.

1

Safety precautions

Please insert the power cord into
special receptacle with rated vol­tage.Be sure to use single-phase
three pins receptacle.The earthing
terminal of the receptacle must be
earthed reliably.If possible,please
adopt electric leakage protector.

If the power cord is bad, to avoid risk it is required to replace it by the
technicians of our special shop or the after-sale service department.
Keep the pin of the power plug clean.

Do not put the machine at damp
place like the bathroom . Never
wash it with water. Do not place
wet laundries on the control panel.

When the machine is normally
using, please put the power plug
at the location easily to be insert­ed and extracted by hand. Be sure
to pull the plug off when there's
power failure, or the machine is
being moved, cleaned or when it
is idle.

Do not use water hotter than 50 C .

In case the washing machine is installed
on ground with carpet , do not block the
ventilation hole with carpet.

Ventilation hole at
the bottom of the
washing machine

Do not let the machine share one receptacle
with other electric appliances. If the power
plug is damaged, or the plugging into the
receptacle is loose, do not use the plug any
more.

Do not wash water-proof laundries like
the raincoat, bike covers etc. to avoid
abnormal vibrations in spinning.

2

Safety precautions

Do not stretch hands into the working
machine. It is dangerous even if the
rotation is slow. Take special care of
the children.

Do not put any hot or heavy items
( such as the kettle with hot water )
on the washing machine.

Handicapped or children without care
shall not use the machine.

Do not decompose, repair or alter
the machine by yourself.

Do not wash laundries with volatile
materials (such as thinner, petrol
etc.).

Petrol

inner

Th

Keep the machine away from direct
sunlight and heat source like the
heater.

To protect your laundries and wash­ing machine, please take out all of the
coins, buttons, sand, hairpin and
other foreign materials before
washing.

Please check if the water faucet is
open, and if the connection of the
water inlet pipe is proper.

It is suggested to use foamless
washing powder.

3

Installation and adjustment

Please install and adjust the machine according to the requirement of
the manual. It is very important to your security and correct operating
the machine.

Usage of the drain hose

The drainage shall be smooth with the drain hose.

1.put the drain hose up to suitable position.

0.7<H<1.2m

2.Do not tramp or press the drain hose.

Install the lint filter

After opening the package, please take out the lint
filter from the document bag, install it to the filter frame
of the cabinet. See to the figure.

Filter frame

Lint filter

Install the water inlet hose; Select the water level

Use the new water inlet hose provided
with the machine to connect to the water
faucet. Old hose sets should not be reused.

Insert the water inlet hose into the water-filling
entrance on the control panel directly. (pull it
out to dismantle it)

Select water level according to the
quantity of the laundries.
Attention:
In water filling, do not exceed
the"Maximum" water level. Otherwise
the water may overflow out of the
washing machine.

Water-filling
entrance cover

Maximum

(About 79L)

Medium

(about 66L)

Minimum

(About 48L)

Max

Medium

Min

Water inlet hose

Water-filling
entrance

4