Haier HWM100-287S User Manual

Semi-auto Twin-tub Washing Machine

U

se

r'

s

m

a

nu

al

This manual is for

HWM100-287S

Please read this manual
carefully before using.
Retain it for future reference.

Water inlet hose

Gland

Lint filter

Packing list

Semi-auto twin-tub washing
machine

Name

Quantity

User's manual

One piece

One piece

One piece

One piece

One set

Water level/Water quantity (about)

Maximum/56L 5/50L 4/45L

3/40L 2/35L 1/30L

Injection pressure(MPa)

0.02 - 0.2

Specification

Rated washing/spinning capacity(kg)

7.0/5.0

14

0030508675B

Contents

Safety precautions

Installation and adjustment

Preparation before washing

The musts in washing

Usage of the detergent

Washing sequence

Disposal after washing

Packing list *Specification

Names of the parts

Trouble-Shooting *Answer to question

Trouble-shooting Answer to question

(If there's breakdown, please pull off the power plug before checking) The following
phenomena are not breakdowns sometimes. Please confirm again before sending
it to repair. If there are real breakdowns, please come to the special maintenance
department or after-sale service department of our company. Do not repair it by yourself.

Phenomena The reason

The machine does
not act.

Is there power failure?
Is the power plug loose?
Is the pulsator twisted by foreign materials?

Is the drain hose frozen?
Is the drain hose blocked by foreign material?
Are there laundries falling to the outer side of
the spin tub?

The draining does
not work.

Are there hair pin, coins or metal items brought
inside the tub?

Is the machine slanting?
Is the gland pressed evenly?
Are there laundries falling to the outer side of
the spin tub?
Are the laundries in spin tub too much?

It is the water remained in the factory inspection
of performance.

There may be some
water flowing out of
the drain hose in the
first use of the
machine.

There's abnormal
sound and violent
vibration during
spinning.

There's abnormal
sound during washing.

13

1

Meaning and description of the symbols

Warning sign

Forbidding sign

Contents marked with that symbol are related
to the safety of the product and the personal
safety of the users. Please operate in strict
conformity to the contents, otherwise it may
cause damage of the machine or injure the
personal safety of the user.

Contents marked with that symbol are actions
forbidden to perform. Performing of those
actions may result in damage of the machine
or injure the personal safety of the user.

Please check if the power receptacle has good earthing
condition before using to guarantee your safety.

Names of the parts

Base frame

Outer cover of the spin tub

Inner cover of the spin tub

Spin timer

Spin tub frame

Spin tub

Cabinet

Water-filling entrance

Wash selector

Wash timer

Control panel

Lint filter(Installed by user)

Pulsator

Wash tub

Wash tub cover

Drain hose

Overflow filter

Trouble-shooting Answer to question

When the remained water is frozen

If the laundries fall to the outer side of the spin tub, Please come
to the special maintenance department or after-sale service
department of our company. Do not repair it by yourself.

If the laundries fall to the outer side of the spin tub

Prevent the freezing (be sure to discharge the water completely after
using)
After complete draining, set the "WASH SELECTOR" at "STRONG"
or "STANDARD". If it is set at "DRAIN", it will be rather difficult for
the frozen water to melt.

When the water is frozen ,Pour hot water below 50 into the wash
tub to soak it completely. Then turn the pulsator with hands gently.
Please confirm the drainage can work normally before next using.

2~3L

Below 50

12

Water-filling translation