Haier HW-F1260TVEME, HW-F1260TVE User Manual

0020500832M

Program Guide

HW-F1260TVE HW-F1260TVEME

Other Functions

16

18

Display messages

－

14

Technical Specifications

1260TVE

6

6

71 71

18

2020 2020

840X580X595

840X580X595

17

HW-F1260TVEME

Part Names

7

Thanks for choosing LUXURII Automatic Drum Washing Machine.

LUXURII washer uses the advanced electromagnetism door lock. In the
washing cycle, while the power is shut off accidently, the door lock is always
locked for your safety. While the power is off for long time, you may want to
take the laundry out, we design the emergency door open system, please
follow the below steps:
Step 1: Touch the door window to feel the temperature whether slight hot or
not. If yes, you have to wait till the temperature drop down (approximate half a
hour) before you start the step 2 operation. If not hot, you can go ahead with
the step 2
Step 2: Remove the drain hose from the bracket, put the end of drain hose into
the floor drain or a tub to drain the water out completely(see Fig 1), then put the
drain hose in place(see Fig 2).
Step 3: Open the bottom cover, you will see a pulling line(see Fig 3), take the
pulling line out and pull it downwards slightly, while you hear slight sound, the
door has already been opened. Then you can start to take the laundry out.
Note: While the door is open, make sure the laundry temperature is low without
harm to you before starting to take the laundry out.
Step 4: After the laundry has been removed, put the pulling line in place and
close the bottom cover.

13

d

Door lock is unable to be unlocked.
Correction: power off the machine, then restart it and select the spin program,
after the spin program ending, the door lock will be unlocked after the temperature
falls below 50

Manually select laundry weight, select while weight is less than 1kg.

Manually select laundry weight, select while the laundry is almost full of the tub.

End of program.

Please contact the service center.

Correction：

Computer board error.
Please contact the service center.

Display messages

6

.

Weighting sensor error.